Location
Home / Resources / Search Results

Search Results

Sponsored Ad
Resources
1-30
31-60 61-73
Zero Clearance Insert Downloadable Woodworking Plan PDF

Do not accept workpiece chip-out on your tablesaw. Instead, eliminate it by using a zero-clearance insert for every cut you make. A shop-made zero clearance insert replaces your tablesaws factory-supplied throat plate, and its wide gap that allows unsupported wood fibers to tear away during a cut.

Category:
Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Tablesaw Jig

This is a link to a Google 3D SketchUp drawing for a tablesaw jig. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type:
free plans
Link Source:
Google 3D Warehouse
Jig, Tablesaw Jointing

You do not need a jointer to get a straight, square edge on a board. An L-shaped auxiliary fence makes it easy to joint a board on a table saw (see Photo at this link).

Link Type:
free plans
Link Source:
WoodworkingTips
Ride the Rails for Safer Ripping Downloadable Woodworking Plan PDF

Ripping thin strips can be dangerous if not done correctly. This rip-fence saddle supports the stock being ripped and keeps your fingers safely away from the blade.

Category:
Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Tablesaw Hold-down jig

This is a free online video for the sliding hold-down jig as it appears in the ShopNotes Magazine Issue No. 96. When ripping narrow strips or cutting a rabbet along the edge of a workpiece, it is sometimes hard to keep the board flat against the saw table. And if you use the featherboard, it can get in the way.

Link Type:
free plans
Link Source:
ShopNotes
Panel Cutting Sled Downloadable Woodworking Plan PDF

When you use this tablesaw accessory, you will never wonder whether the corner you just cut is square. For hair-splitting accuracy, the beefy fence is fixed at 90 degrees to the blade and shows exactly where your saw blade cuts. And, the fence-leading design holds wider work pieces more solidly and keeps your work closer than fence-trailing jigs.

Category:
Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Straight Tracking Crosscut Sled Downloadable Woodworking Plan PDF

For cutting long or wide stock on your tablesaw, this simple jig is like having another pair of hands. With a long, wide base securely anchored to a 20 inch long miter gauge slot guide bar, this crosscut sled provides a lot more workpiece support than a standard miter gauge. And it is so inexpensive and easy to build that every tablesaw should have one.

Category:
Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Mighty Miter Sled Downloadable Woodworking Plan PDF

Setting up for perfect miter cuts can be time consuming. With a miter sled, you do it only once.

Category:
Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Tablesaw Seven Pack Woodworking Plans

This seven pack of plans will help you get the most use out of your tablesaw. First is the Precision Miter Stop which you can make in minutes and use as a lifetime addition to your shop. Next is the T...

Category:
Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Jig, Tablesaw Hold Down

There are several things to think about when cutting a thin sheet of material on a table saw. Not the least of which is providing enough downward pressure so the sheet won not ride up inches over the saw blade, causing a potentially dangerous kickback.

Link Type:
free plans
Link Source:
WoodworkingTips
Sponsored Ad
Jig, Bottomless Crosscut

With no back or bottom, this jig is great for dadoing and for crosscutting wide stock.

Link Type:
free plans
Link Source:
American Woodworker
Miter Jig Downloadable Woodworking Plan PDF

Once you build this little beauty, you can rest assured that your miters will always match up.

Category:
Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Miter-Gauge Extension Downloadable Woodworking Plan PDF

Reliable and accurate crosscuts on a tablesaw require a miter-gauge extension with an adjustable stop. You will find many good miter-gauge extensions on the market, but you can make your own and save some cash in the process.

Category:
Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Shopmade Tablesaw Miter Sled Downloadable Woodworking Plan PDF

This miter-cutting sled offers a dual-rail guidance system that rides in the miter-gauge slots of your tablesaw and smooth-acting stops that ride in tracks. It also features a safety channel down the middle to keep your hands away from the tablesaw blade.

Category:
Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Jig, Tablesaw - Compound Miter Sled

Here are plans for the compound miter sled that I use for making 12-sided 50-degree compound-mitered segmented rings.

Link Type:
free plans
Link Source:
TurnedWood
Jig, Cross Cut Sled

I made this simple crosscut sled, which works like a giant miter gauge, for crosscutting panels on my table saw.

Link Type:
free plans
Link Source:
WoodworkingTips
True Cut Taper Jig Woodworking Plan

Ripping table legs or other project pieces at an angle can be frustrating and even dangerous work. However, with our taper jig, you will be able to quickly set the precise angle and safely cut leg aft...

Category:
Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Easy Lock Feather Board Downloadable Woodworking Plan PDF

When ripping stock on your tablesaw, keep it firmly and safely against the fence with this handy adjustable locking feather board. Not only does it prevent wavy cuts, it guards against dangerous kickback.

Category:
Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Jig, Dowel Pin Cutting

Cutting multiple short dowel pins can be tedious work. So I made a simple dowel pin cutting jig to speed things up. This jig only takes a few minutes to make and set up on your table saw. Then it is easy to quickly cut dowels to equal length without measuring.

Link Type:
free plans
Link Source:
WoodworkingTips
Miter Fence Accessory PDF

This table saw jig will help you achieve precise angles when woodworking. At the link you can download and follow along with the step-by-step instructions.

Link Type:
free plans
Link Source:
BobsPlans
Sponsored Ad
Tablesaw Frame and Panel Jig

The tablesaw and a couple of jigs are all you need to make excellent frame and panel doors and cabinet parts. This jig does the job safely and precisely.

Link Type:
free plans
Link Source:
American Woodworker
Tablesaw Panel Jig

This is a link to a Google 3D SketchUp drawing for a panel jig for cutting large panels. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type:
free plans
Link Source:
Google 3D Warehouse
Zero Clearance Cross Cut Sled Downloadable Woodworking Plan PDF

The most useful tool in our shop is the tablesaw. Here is a simple-to-build jig that makes cutting chip-free crosscuts a breeze.

Category:
Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Table saw Strip Cutting Jig

This is a link to a Google 3D SketchUp drawing for a table saw strip cutting jig which produces reliable, identical strips of exact size without moving the fence. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type:
free plans
Link Source:
Google 3D Warehouse
Table Saw Alignment Rig

This is a link to a Google 3D SketchUp drawing for a shop made table saw alignment rig from scraps and using your digital caliper. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type:
free plans
Link Source:
Google 3D Warehouse
Mission End Table Downloadable Woodworking Plan PDF

Build this super simple yet stylish project using only five tools. This is part of our Basic Built series of plans. Follow the instructions to learn how to conceal mounting screws with decorative square plugs and how to safely machine the plugs using your tablesaw. And, discover an easy way to glue up flat panels using just two clamps and a simple jig made from a 2x4.

Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Tablesaw Joinery Jig Downloadable Woodworking Plan PDF

Tight-fitting joints are a snap on any saw when using this sturdy but adjustable jig. Use it to cut tenons, half-laps, and bridle joints.

Category:
Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Table Saw Jigs for Safety

Safety is the most important thing in the workshop. Here are two options for building table saw jigs to keep your hands at a safe distance.

Link Type:
free plans
Link Source:
BobsPlans
Perfect Half-Lap Jig Downloadable Woodworking Plan PDF

Cutting on-the-money rabbets for half-lap joints with a portable circular saw and handheld router is a breeze with this two-in-one jig. Perfect for those who want great joinery but do not have a tablesaw to accomplish it.

Category:
Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Dedicated Mitre Sled for Tablesaw

This shop-made accessory is designed to cut accurate mitre joints on the tablesaw. This is a link to a Google 3D SketchUp drawing. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type:
free plans
Link Source:
Google 3D Warehouse
Resources
1-30
31-60 61-73
Sponsored Ad

Free Woodworking Plan Pages

Sponsored Ad
Resources & Free Plans

Since 1998, we have curated the Internet's largest online woodworking resources database.

Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.

Visit Resources & Free Plans

Banner Adverts
Maritime Bar Stool and Lifeguard Chair plans
Toy Tools Woodworking Plans
Chain Swing
Card File Octagon Cabinet
Planter Box and Trellis
Mailbox Planter Woodworking Plan
8ft Tall Sasquatch Yard Art Woodworking Pattern
Candle Stand Woodworking Plan
Gun Cabinet Woodworking Plan
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2021 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2021 Kryptronic, Inc. Exec Time: 0.230965 Seconds Memory Usage: 5.283051 Megabytes
Kryptronic