ARBORTECH Wood Carving Tools

This chisel features a gouge shape 3 mm deep x 20 mm wide (1/8 x 25/32 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.

This chisel features a gouge shape 5 mm deep x 12 mm wide (3/16 x 15/32 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.

This chisel features a gouge shape 9 mm deep x 13 mm wide (11/32 x 1/2 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.

This chisel features a flat shape 8 mm wide (5/16 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.

This package of tradesperson chisels in combination with your Arbortechâ Power Chisel (or suitable converted 4 or 4.5 inch angle grinder) will make precise work of in any other number of situations where wood removal is needed, either a small or larger amount. Chisels are high strength steel and heat treated for best performance in hardness.

Self adhesive sanding discs, 2 inch (51 mm) diameter, 25 pcs, 80 grit.

This accessory will turn your angle grinder into a precision shaping tool. The clear, tough polycarbonate shield will allow you clear view of your work while redirecting the wood chips away from you. You should still use protective eye weer. The adjustable depth and allows you to still free hand carve your wood project. Suitable for shaping, trimming, slotting and cutting. Suits most 100mm (4 inch) and 115 mm (4.5 inch) angle grinders. This accessory tool can be used with the Arbortech product line of power carving woodworking tools.

This chisel features a gouge shape 7 mm deep x 20 mm wide (9/32 x 25/32 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.

This chisel features a No. 8 sweep and 7 mm wide (9/32 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.

Sanding discs, 2 inch (51 mm) diameter, 25 pcs, assorted grit with 2 flanges and 2 screws and 1 hex key.

For use with your Arbortechâ mini grinder, this package contains four discs of120 grit 2 inch (50 mm) diameter heavy duty abrasive pads. The pads screw directly onto the mini grinder extension arm (screw is included).

Self adhesive sanding discs, 2 inch (51 mm) diameter, 25 pcs, 320 grit.

Self adhesive sanding discs, 2 inch (51 mm) diameter, 25 pcs, 400 grit.

Sanding discs, 2 inch (51 mm) diameter, 25 pcs, 240 grit with 2 flanges and 2 screws and 1 hex key.

This chisel features a V shape 12 mm deep x 8 mm wide (1/2 x 5/16 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.

This chisel features a gouge shape 11 mm deep x 7 mm wide (7/16 x 9/32 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.

This service package contains Arbortechâ SPN67 oil for their tools. Extra shipping is required due to the dimension of the bottle.

Sanding discs, 2 inch (51 mm) diameter, 25 pcs, 120 grit with 2 flanges and 2 screws and 1 hex key.

This hardened steel round file is 5/32 inch (4 mm) diameter), suitable for the mini carver blades used with the Arbortechâ product line of power carving woodworking tools.

For use with your Arbortechâ mini grinder, this 2 inch diameter blade offers a 3/8 inch (10 mm) depth of cut and a kerf width of 3/16 inch (4 mm). The tungsten carbide tip blades can be resharpened using a fine diamond abrasive.

For use with your Arbortechâ mini grinder or any appropriately sized grinder with the extension (supplied). Use with guided templates or freehand, the extension will allow for almost 2.75 inch of deep carving capability. Includes sanding pads in 40, 60, 80 and 120 grit as well.

This service package contains replacement parts for your Arbortechâ Power Chisel (or suitably converted 4 or 4.5 inch angle grinder) that include bushes, springs and the felt pad in the oil reservoir.

This backing pad kit provides you with a replacement kit or for an additional supply, that included one rubber backing pad 2 inch (51 mm) diameter disc, 2 flanges, 2 set screws and one hex key.

This flange kit provides you with a replacement parts or for an additional supply, that included five flanges to secure your 2 inch (51 mm) diameter sanding disc, 5 screws and one hex key.

This replacement Torxâ key are for securing Torxâ M3 screws, found on the Arbortechâ Industrail Woodcarver blade #63-IND-FG-100. The package contains one key. This accessory tool can be used with the Arbortechâ product line of power carving woodworking tools.

For use with your Arbortechâ mini grinder, this package contains four discs of 40 grit 2 inch (50 mm) diameter heavy duty abrasive pads. The pads screw directly onto the mini grinder extension arm (screw is included).

This chisel features a flat 20 mm wide (0.75 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.

This chisel features a flat shape 13 mm wide (1/2 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.

This package of tradesperson chisels in combination with your Arbortechâ Power Chisel (or suitable converted 4 or 4.5 inch angle grinder) will make short work of joints, recesses, dovetails and any other number of situations were wood removal is needed, either a small or larger amount. Chisels are high strength steel and heat treated for best performance in hardness.

Self adhesive sanding discs, 2 inch (51 mm) diameter, 25 pcs, 600 grit.