Outdoor and Garden - Arbors

We created this project to be constructed entirely out of 1x4 lumber, minimising the need for cutting and streamlining the construction process. The cross piece strips are 1 inch wide. To rip these parts, use a table saw. The arbour is approximately 89 inches tall, 50 inches deep, and 88 inches broad overall. 36 inches wide on the interior. This woodworking plan includes exploded view schematics, instructions, and full-size pictures for all the sections requiring mitre or bevel cuts.

This small building's base is only 8 feet by 8 feet. Six feet by six feet, or the raised centre section, is just big enough for a modest table and two chairs. The compact size saves money on construction costs and occupies little room in your yard.

A lovely garden arbour for showing off your plant. Accommodates a clay pot with a regular 5 inch diameter. This woodworking design includes directions, exploded view diagrams, and full-size images to make the projects displayed.

This small building's base is 10 by 10 feet. A modest table and two chairs can barely fit in the raised centre section's 6 x 6 foot size. The compact size saves money on construction costs and occupies little room in your yard. The projects depicted in this woodworking plan can be built using the images, exploded view schematics, and instructions provided.

If you have the room, we have the plans. This beautiful arbor stands 91 inches tall and 144 inches from end to end. It works great for hanging an hammock or swing. Slatted ends work great for climbing...

Standing just under 7 feet tall and 4 feet wide, this project was constructed of long-lasting cedar, and will gracefully accent your surroundings and serve as a comfortable place to contemplate the jo...

Basic skills and our step-by-step instructions are all you need to build this inviting garden gateway. It combines two straightforward joinery methods: biscuits and interlocking notches. It is a rewar...

Build an inviting approach to your backyard with this arbored garden gate. Build this gate as an addition to your existing fence, and walking into your backyard will never be the same again.

This freestanding structure with 6 x 6 posts lets you venture beyond the deck for outdoor seating. Plan is for the arbor only. Project measures 8 feet tall by 106 inches wide. Also included with the plan is a rip-fence saddle shop-built jig for top notch machining and joinery. Please be advised that the porch swing plan shown with this arbor is sold separately. Swing plan is 31-OFS-1002.

With no boards to rip down and only two posts to set in the ground, you will be relaxing in record time! Simple joinery, just screws and a few notches. Decorative battens and beams strengthen the arbor while providing partial shade too.

This elegant piece provides a perfect focal point for even the fanciest of gardens. And when you are through with it in the fall, just disassemble it for wintertime storage.

Build this elegant Arts and Crafts inspired arbor and matching gate to provide an inviting entrance to a landscaped backyard or patio.