Birdhouses

Cute lamp in the form of a two-story birdhouse. Nice weekend project. DXF Format

Marilyn got the idea for this at a you-paint ceramics store that had a ceramic purse/vase. I did the design and all the building and she did all the hard work of making it a piece of art. We think you will like this little project.

I will explain the basic steps of building a turned birdhouse. Once you understand the process, try designing and building your own birdhouse.

Every woodworker needs to build a replica plane birdhouse. So cool. You will need 10 to 12 board feet of a exterior grade lumber to build this birdhouse, especially if you want it to last for a long time.

The front gable is open, entrance to the room below being through the rear of the upper floor. This house can be opened for cleaning by lifting out the upper floor.

May be suitable for carving, woodburning (pyrography), intarsia or scrollsaw ideas.

Build a cheap birdhouse using scrap plywood, juice cans, small hinges, and a kitchen garbage bag

Bluebirds and wrens, as well as swallows, nest in this style of house though they prefer a deeper cavity.

This birdhouse is so easy to make from scraps, it would be a great afternoon project to make with the kiddos!

This is a link to a Google 3D SketchUp drawing for a birdhouse. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

This free craft pattern source is courtesy of the Country Corner Crafts web site.

Here is a simple bird house plan.

Roof and house sides of the wren house are made of either inch or 5/16 inches apple crate lumber. The four roof boards are cut with compound angle cuts with the miter gage set at 50 degrees and the saw blade tilted at 24 degrees. All cuts are made with one miter gage setting by flopping the piece as shown in Photo No. 2.

Free Birdhouse Woodcraft Patterns from Country Corner Crafts web site.

This is another very simple project when pre-cut pieces are used. All parts are cut from 3/4 inches pine planking scraps. The bottom is held in place with two 1-1/2 long counter-sink screws. Use the diagrams to cut out all pieces to the specified sizes.

These decorative birdhouses were created using a scroll saw. At the link are instructions as well as downloadable patterns.

This is a small and simple bird house suitable for the junior woodcrafter.

The flicker birdhouse shown in figure 23 is designed to be placed on a post or the stub of a tree. The roof can be lifted in the same way that a stopper is removed from a bottle.

This is a link to a Google 3D SketchUp drawing for a birdhouse to be mounted on a wall or post. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

This is a link to a Google 3D SketchUp drawing for a simple birdhouse you can build for less than $5. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

With only a few tools and some cedar, you can build this modern birdhouse.

This birdhouse will take just a short time to build and your feathered friends will enjoy a cool place to land.

With just some scrap wood, and about an hour of your time, you can build a wonderful birdhouse that you can enjoy all year round. You can create your birdhouses for specific types of birds, depending on the entrance hole size, the size of the birdhouse, and how high you mount or hang your birdhouse from the ground. In just a short while, you can be bird-watching right from your window!

At the link you will find the instructions to build a wooden birdhouse for your backyard. It is so easy even a child could build it with supervision.

Build this fun license plate birdhouse using these free instructions. There is an access door on the side for easy clean out after nesting season is over.

Building a three level home for birds from wood, including: materials list, diagrams, instructions.

Build your own backyard birdhouse using only a few common workshop tools and a cedar fence board. Follow along at the link to see how we did it.

We have been seeing these at street fairs and Saturday markets around the area and since we had an old license plate we decided to make our own. They are simple and a good way to use up an old license plate.

A birdhouse suitable for members of the woodpecker family and also for nuthatches and titmice, including chickadees.

Sparrows often nest under the eaves of houses but many modern houses are not sparrow friendly. This bird box will help reverse the decline.