We built our daughter a nightstand many years ago and I love how it turned out but it is small and doesn’t have a any storage. So we decided it was time for an upgrade. After some looking around we decided on a simple design with two doors for storage below and a cool accent of cane on the doors. We were able to build this for her using one sheet of plywood and a few boards. Read on to see exactly how we did it.
If you love this stuff as much as we do, you might want to consider following us on Instagram where we post sneak peeks and behind the scenes stuff in our stories. Also, did you know you can get tons of projects plans from all around the web when you follow us on Facebook and Pinterest!
Disclosure: This project was sponsored by Kreg Tool Company however the design opinions are 100% my own.
Full Project Video
Wanna see how it all came together? Check out the full project video below and don’t forget to subscribe on YouTube so you won’t miss future videos!
Tools
Materials
- 3/4” x 4’ x 8’ Plywood
- (2) 2 x 2 x 6′ Boards
- (2) 1 x 3 x 6′ Boards
- Cane Webbing Sheet
- (4) Inset Concealed Hinges
- (2) Door Pulls
- 1-1/4” Pocket Screws
- 2-1/2″ Pocket Screws
- Pine Pocket Hole Plugs
- Iron-On Edge Banding
- Primer & Paint
Disclosure: The links provided in the “materials” and “required tools” sections are affiliate links. If you would like to support our site and help keep our content free come find out more about how we can make money with no extra cost to you.
Dimensions
Cut List
How to Build an Open Storage Unit
Time needed: 1 day.
- Assemble Sides
- Assemble Bottom
- Assemble Base
- Install Top
- Assemble Doors
- Install Doors and Shelf
Questions? Comments?
As always, if you have any questions don’t hesitate to comment below and especially don’t forget to post pictures of your finished products in the comments! ENJOY!
