Skip to Content

DIY Outdoor Couch

Our sunroom really needed some cute outdoor furniture, so I came up with plans to build a DIY outdoor couch! This was my first piece of DIY outdoor furniture that I’ve built and I love it!

I love how our outdoor couch turned out and I’m excited to share the step by step tutorial!

Also, I have a step by step video tutorial and FREE printable build plans below too!

One of the best features about this DIY outdoor couch is that it only cost $30 in lumber to build!!! The exterior stain I used was an additional $15, so a total of $45 for me to build it!

DIY outdoor couch

Cushions Used & Cushion Options

The couch was designed to fit with two sets of outdoor cushions that are no longer sold or in stock (they use to go out of stock all of the time). I have many other cushion options listed below and updated for 2024!

The original cushions I used were 28.75 long x 28.75″ wide each (the seat cushion size). The closest in size that I have seen currently in stock are these 28×28 cushions (and they come in multiple colors).

But, most readers that have made this couch have changed the dimensions to fit other size cushions.

*I have updated the FREE outdoor couch build plans to include an alternative cut list for the 24×24 and 28×28 common couch cushion sizes!

If you use different cushions than the ones above, make sure to adjust the below cut measurements! And make sure to order your cushions first before building in case they go out of stock!

Spring 2024 Cushion Update:

The cushions I used are still out of stock. Here are currently stocked options in 28×28 and 24×24 sizes (and multiple colors/good reviews) as of spring 2024:

Free Printable Build Plans

Also, get the FREE printable build plans here for this outdoor couch. *If you have already subscribed, you can find this printable in the Free Printable Library.

***These plans also include alternative cut lists for the 24×24 and 28×28 common couch cushion sizes!***

I built a matching DIY outdoor chair and DIY outdoor coffee table and DIY outdoor side table to go with the couch and complete the set!

I also have a DIY outdoor dining table that compliments the outdoor furniture set too!

Note, this post contains some affiliate links. For more info see my disclosures here.

How to build a DIY Outdoor Couch:

Materials:

Tools:

**If you use different cushions than the ones I used, make sure to adjust the below cut measurements!

The final size of this DIY outdoor couch is 26″ tall x 62 1/2″ wide x 30 1/4″ deep.

Click here to get the free printable build plans

VIDEO TUTORIAL:

Subscribe to my YouTube Channel here!

1. Make cuts for outdoor couch frame

Use a miter saw and make the following cuts from the 2x3s:

  • 4 pieces @ 24 1/2″ (for side frames)
  • 2 pieces @ 30 1/4″ (for side frames)
  • 5 pieces @ 57 1/2″ (for back & front frames)
  • 8 pieces @ 27 1/4″ (for side & bottom frames)

Note, if this is your first time building , check out my 6 easy tips for getting started with woodworking!

*Get the FREE outdoor couch build plans which also has an alternative cut list for the 24×24 and 28×28 common couch cushion sizes!

2. Assemble DIY outdoor couch side frames

Add two pocket holes with the Kreg Jig to each end of two of the 27 1/4″ pieces.

Tip: See my how to use a Kreg Jig post for an easy, step by step tutorial and video tutorial on how to use the Kreg Jig!

add kreg hole to both ends of wood board

Mark 10″ up from the bottom of one of the 24 1/2″ pieces (on the edge of it). Attach one of the 27 1/4″ pieces perpendicularly to the 24 1/2″ piece at the 10″ mark.

*Note: If you prefer the seat to sit higher than 10″ (plus your cushion height), increase the 10″ marks by a few inches to your desired seat height!*

Make sure to attach it so the edge of the 27 1/4″ piece is flush with the top edge of the 24 1/2″ piece as shown in the below photo. I used a scrap 1×2 and paint stick underneath of the board to help with this part!

Attach longer boards to shorter boards to start making side couch frames

Then attach the two together with 2 1/2″ Kreg screws and waterproof wood glue. Repeat this process on the other side of the 27 1/4″ piece. Once complete your side frame piece will look like this:

two short boards attached to long board to start forming outdoor couch side frames

Next, attach one of the 30 1/4″ boards to the top of the frame with 2 1/2″ deck screws and waterproof wood glue. Make sure they are countersunk beneath the wood surface (you will fill them with wood filler later).

I forgot to get deck screws, so I just used Kreg screws instead, which works too!

To do this, I used a 3/8″ drill bit and drilled a shallow hole, just deep enough to cover my screw head. Then, I drilled my pilot hole inside of that larger hole with a smaller bit for the Kreg screw. Lastly, I drilled in my Kreg screw to attach the two boards.

drill pilot holes to assemble top of outdoor couch side frames

Repeat on the back of the side frame piece and then your side frame is complete!

Assembled DIY outdoor couch side frames

Repeat the above process to create the second side frame piece for your DIY outdoor couch.

Also, the steps for these side frames are exactly the same as the matching DIY outdoor chair. I created a how to build an outdoor chair VIDEO if you want to see the steps in a video tutorial form!

3. Add side slat boards to side frames

Now it’s time to add the horizontal slat boards to the side frames. This step is totally optional. These slats are more a decorative feature than structural. I think they make the DIY outdoor sofa look really cool and will help prevent throw pillows from falling out the sides!

Measure the exact distance between the two legs of the side frames and cut three 1x3s to this size. The measurements should be close to 27 1/4″ but since we’re working with framing lumber, they will probably be a little different.

Each of my three slats were a little different in size, so make sure to measure exactly where the board is going. The boards should be spaced out 1 3/4″ from each other:

Add side slat boards to side frames

Attach the 1×3 slat boards with a brad nailer and 2″ brad nails.

Add side slat boards to side frames with brad nailer and brad nails

wood side frame with wood slats for DIY outdoor sofa

Repeat the above process for the second side frame.

4. Assemble bottom frame of DIY Outdoor Sofa

Add pocket holes to both ends of the remaining 6 boards @ 27 1/4″ AND to the ends of the 5 boards @ 57 1/2″.

Then use Kreg screws and waterproof wood glue and attach four of the 27 1/4″ boards perpendicularly to two of the 57 1/2″ boards as shown in the below photo. Make sure the 57 1/2″ boards pocket holes are facing the inside.

Space the 27 1/4″ boards about 6″ part and attach the first and fourth board about 14 1/2″ up from the side board ends. Note, you will add the other 2 boards in soon, but not yet so you can easily fit your drill in the space and attach this bottom frame to the side frame in the next step.

attach bottom frame of couch together with kreg screws

5. Attach bottom frame to outdoor couch side frames

Attach the bottom frame to the side frames using 2 1/2″ Kreg screws and waterproof wood glue and 10″ up from the ground (as shown in photo below). It helps to place the side frame flat on the floor and have a second person hold up the bottom frame on top of it.

Attach bottom frame to outdoor couch side frames

Once both side frames have been attached to the bottom frame, go ahead and add the last two 27 1/4″ boards on the bottom frame (from step #4). If it’s difficult to get them in place, use a hammer to tap them in place better.

finish adding in bottom frame boards couch build

6. Add back frame boards to DIY outdoor couch

Turn the outdoor couch on its side and use Kreg screws and waterproof wood glue to attach the remaining three, 57 1/2″ boards to the side frames to create the back frame of the couch (space the boards about 2 3/4″ apart).

Add back frame boards to DIY outdoor couch with drill and kreg holes

Flip your couch back up and your DIY outdoor couch build is finished yay!!!

Back of DIY outdoor couch before staining

Front view of DIY outdoor couch before staining

7. Fill holes, sand, and stain

Fill the 4 screw holes and nail holes in with stainable wood filler. If you haven’t sanded your boards yet (I like to do most of my sanding before starting), go ahead and sand them well.

For tips on sanding wood, check out my easy guide on how to sand wood.

Finish off your project with exterior wood stain! I used Valspar semi transparent exterior stain in Pine bark. It was one of the only exterior stains I could find that came in a quart size and not a gallon size. And it only took one coat!

Check out my tutorial on how to stain wood for a beautiful finish and the best way to apply stain!

After staining, let your couch dry for a full 24 hours, then add the cushions, and enjoy!!!

DIY outdoor furniture an outdoor couch in sunroom

Here’s another angle of it!

DIY outdoor sofa

I loveeee this DIY outdoor couch so much, I’m thrilled with how it turned out and the low cost! In the spring I’d like to build a matching chair set to go with it!! How fun would that be?!

Update: I built a matching DIY patio chair and DIY outdoor coffee table and DIY outdoor side table to go with the couch! And a DIY outdoor dining table that compliments the set too!

So, what do you think of this build? It fits great in small spaces and it has really helped to start transforming our sunroom into an enjoyable, cute, and functional space. Next up, I need some kind of wall art to go above it!

If you make this DIY couch, please share it with me on social media @angelamariemade or #angelamariemade! *You can also share your build in our Woodworking for the Home facebook group, be sure to join!

Follow along on my latest projects and sneak peaks on Instagram, YouTube, and Facebook!

If you want to save this tutorial for later, Pin It here:

DIY outdoor couch with cushions and without cushions and stain

Decor Product Sources:

Sharing is caring!

Brenna Tunnicliff

Saturday 6th of January 2024

Hello!

First of all, thank you for making this! I made this and two chairs using the chair plans two years ago; we have gotten a ton of use out of them! I do not have them in a covered area, so they definitely take a beating in the PNW weather.

With that said, I have a couple of recommendations to all who are planning on building these to use outdoors:

1. Use stainless steel brad nails or outdoor trim screws to avoid bleeding. Also, I’ve had several snap, so consider just screwing them in instead.

2. Add an additional support piece of wood (like a 2”x 1”) to the insides of both front legs to prevent the wood from snapping from the weight. I know this from experience 😂

3. Consider using pressure-treated wood or cedar for durability.

4. Consider sanding and staining prior to building—way easier!

Because of the above, these unfortunately only lasted three seasons before turning to firewood.

Charis Hasson

Monday 3rd of July 2023

Hi I love the couch and chairs for outside and would like measurements to fit the cushions I just found. I'm using (3) 24x24 cushions instead of 2 to make it a little bigger for the couch. Would u mind sending me measurements for that? Thank u so much. I love all ur designs

Michael

Tuesday 20th of June 2023

Seems like thestraight upright back would not be as comfortable as one would like.

Irma

Thursday 15th of June 2023

I love this post so much, my husband and I will be making this happen this Summer but with a sectional. However, we'd love to know what the measurements would be for a 24x24 cushion. We definitely would appreciate this!

Julie

Tuesday 6th of June 2023

Thank you for posting. I am so excited to make this. But first before purchasing the wood I need to look for the cushions. Looking forward to seeing other things that you have created.

Angela Marie Made

Friday 9th of June 2023

So glad it was helpful! Yes, it's so important to get the cushions first so you can adjust your measurements as needed. Best of luck with your build!