Home 18x18 18×18 Pergola Plans

18×18 Pergola Plans

by Ovidiu

 

This step by step diy project is about 18×18 pergola plans. I have designed this large square pergola, so you can enjoy your afternoons in your garden together with your loved ones. This pergola is sturdy and easy to build, so you can get the job done by yourself, and keep some money in the pocket. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

18×18 Pergola – Free DIY Plans

Building-a-18x18-pergola

Building-a-18×18-pergola

 

Cut & Shopping Lists

  • A – 4 pieces of 6×6 lumber – 11′ long POSTS
  • B – 4 piece of 2×8 lumber – 20′ long SUPPORT BEAMS
  • C – 13 pieces of 2×6 lumber – 20′ long SHADE ELEMENTS
  • D – 6 pieces of 1×2 lumber – 20′ long SLATS
  • E – 4 pieces of 4×4 lumber – 45 3/4′ long, 4 pieces – 40 1/2″ long BRACES

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets my latest plans and for some other exclusive content. Also, follow me on Pinterest and Instagram to get many ideas for your backyard from all the internet! Check out my YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a 14×14 pergola plans

The first step of the pergola project is to layout the posts. Use batter boards and string to layout the location of the posts. Apply the 3-4-5 rule to every corner and then measure the diagonals to make sure they are perfectly equal. You need to make adjustments until you get the desired result.

Footings

Footings

Dig the holes 3′ deep (or under the front line) and about 12-16″ in diameter. Compact a layer of gravel to the bottom of the holes and then fit the tube forms. Fit the posts, align them and plumb them with a spirit level. Fill the forms with concrete, while the posts are locked into place with temporarily braces. If you use anchors, you need to align and set them into concrete. Fit the posts after the concrete dries, using lag screw.

Smart tip: Read the local building codes, so you dig the holes at the appropriate depth.

Support-beams---pergola

Support-beams—pergola

Use 2×8 lumber for the support beams. Make decorative cuts to both ends of the beams. You can use a large circular item so you can draw the curved lines. Get the job done with a jigsaw and then smooth the edges for a neat result.

Fitting the support beams

Fitting the support beams

Fit the support beams to the top of the posts. Use a spirit level to plumb the support beams and then clamp the beams into place tightly. Drill pilot holes through the beams and through the posts. Insert the 9″ carriage bolts and then tighten the nuts.

Rafters-for-18x18-pergola

Rafters-for-18×18-pergola

Use 2×6 lumber for the shade elements. Mark the cut lines and then get the job done with a saw. In addition, you need to make a few 2″ deep notches, so you can fit the shade elements to the support beams. Mark the cut lines on the beams and then use a circular saw to make parallel cuts. Use a chisel to remove the excess and then smooth the recess with sandpaper.

Fitting-the-rafters

Fitting-the-rafters

Fit the shade elements to the support beams. Place the shade elements equally spaced and then lock them into place with rafter ties. Alternatively, you could drill pilot holes through the shade elements (above the notches) and insert 5 1/2″ screws so you can lock them into place tightly.

Building the braces

Building the braces

Use 6×6 lumber for the braces. As you can easily see in the diagram, you need to cut out a decorative curve inside the braces, so you get a professional result.

Fitting the braces

Fitting the braces

Fit the braces to the pergola and make sure the corners are square. Drill pilot holes and insert 3 1/2″ screws to lock them into place tightly.

Fitting the top slats

Fitting the top slats

Fit the 1×2 slats to the top of the pergola. Place these slats equally spaced for a professional result. Center the slats to the rafters and then drill pilot holes, before inserting the 1 5/8″ screws.

18x18 pergola plans

18×18 pergola plans

Last but not least, you need to take care of the finishing touches. Therefore, fill the holes with wood putty and then smooth the surface with 120-220 grit sandpaper. You can also fit braces, if you live in a windy area. Apply a few coats of paint or stain over the components, to enhance the look of the pergola and to protect the components from decay.

DIY 18x18 pergola plans

DIY 18×18 pergola plans

This pergola provides plenty of space for setting several chairs, an outdoor sofa and an outdoor table. You can even cover the pergola of you want to obtain even more shade, especially during the hot summer days. Check out the rest of my pergola plans, as I have many designed and sizes you can choose from.

 

 

This woodworking project was about 18×18 pergola plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

3 comments

Mike -

Do the 1×2’s have to be one piece? I’m finding it very difficult to source as all suppliers say they warp too badly and to use 1x2x12 instead

Reply
Ovidiu -

No. It works with 2 pieces as well

Reply
Guy -

Would there be an issue swapping out the posts for 8×8’s and the beams with 2×10 or 2×12’s? From what I can see, it should not be a problem as the 2×10 and 2×12 have greater spans than the 2×8

Reply

Leave a Comment