This step by step diy woodworking project is about king platform bed plans. If you want to learn more about building a beautiful king size bed frame made out of wooden boards, we recommend you to pay attention to the instructions described in the article. There are so many designs and plans to choose from when building a platform bed, so make sure you take a look over the related woodworking projects that are featured on our site.
Before starting the actual construction project, we recommend you to plan everything, as to save money and to keep the costs under control. Adjust the size and the design of the platform bed to suit your needs. In addition, we recommend you to invest in high-quality materials, such as pine, redwood or cedar, as they have a nice finish and are highly durable, especially in a humid environment.
If you don’t have a rich expertise in woodworking field, you should ask a friend to give you a hand with the project. There are many things that you could go wrong, so make sure you plan everything and invest in quality materials. Select the lumber with attention, making sure the components are perfectly straight and in a very good condition. Use a carpentry square to check if the corners are right-angled. See all my Premium Plans in the Shop.
Made from this plan
King platform bed plans
Building a king size bed
Materials
- A – 2 pieces of 2×2 lumber – 35″ long, 1 piece – 78″ long, 1 piece – 75″ long, 1 piece of 2×6 lumber – 75″ long HEADBOARD
- B – 2 pieces of 1×6 lumber – 75″ long SUPPORTS
- C – 9 pieces of 1×6 lumber – 20″ long, 8 piece of 1×3 lumber – 20″ long SLATS
- D – 2 pieces of 2×2 lumber – 13 1/2″ long, 1 piece – 78″ long, 1 piece of 2×6 lumber – 75″ long FOOTBOARD
- E – 2 pieces of2x8 lumber – 79″ long SIDES
- F – 2 pieces of 1×6 lumber – 79″ long, 1 piece of 2×6 lumber – 79″ long CLEATS
- G – 14 piecse of 1×4 lumber – 75″ long SUPPORTS SLATS
- 4 pieces 2×2 lumber – 8 ft
- 3 pieces of 2×6 lumber – 8 ft
- 6 pieces of 1×6 lumber – 8 ft
- 2 pieces of 1×3 lumber – 8 ft
- 2 pieces of 2×8 lumber – 8 ft
- 7 pieces of 1×4 lumber – 8 ft
- 1 1/4″ screws
- 2 1/2″ screws
- 1 1/4″ brad nails
- glue, stain
Tools
- Safety gloves, glasses
- Miter saw, jigsaw
- Chalk line, tape measure, spirit level, carpentry pencil
- Drill machinery and drill bits
Tips
- Apply several coats of wood stain to the wooden components
- Fill the holes with wood filler and smooth the surface
Time
- One Day
Related
Building a king platform bed plans
Building the frame of the headboard
The first step of the woodworking project is to build the headboard for the king platform bed. As you can easily notice in the diagram, we recommend you to build the legs and the horizontal supports out of 2×2 lumber. Use 2×6 lumber for the support beam. Drill pocket holes at top of the legs and insert 2 1/2″ screws into the top support. Make sure the corners are square and add glue to the joints. Drill pocket holes at both ends of the horizontal beam and insert 2 1/2″ screws into the legs, after making sure the edges are flush.
Fitting the supports to the headboard
Next, fit the 1×2 supports to the headboard, as described in the diagram. Drill pocket holes at both ends of the supports and secure them to the legs by using 1 1/4″ screws. Place the supports equally-spaced and add glue to the joints. Make sure the corners are square before inserting the screws.
Building the headboard panel
Use 1×6 and 13 slats to build the panel for the headboard. Drill pilot holes through the back supports and insert 1 1/4″ screws into the slats. In addition drill pocket holes at both ends of the slats and secure them to the frame of the headboard
Building the footboard
Build the frame of the footboard out of 2×2 lumber and the panel out of 2×6 lumber. Take accurate measurements and cut the components at the right size by using a circular saw. Drill pocket holes at the top of the legs and insert 2 1/2″ screws into the top support. Drill pocket holes at both ends of the slat and fit it between the legs. Add glue to the joints and make sure the edges are flush.
Assembling the frame of the bed
Next, assemble the king platform bed by installing the side slats to the structure, as shown in the diagram. Drill pocket holes at both ends of the 2×8 beams and secure them to the legs. Make sure the edges are flush and the corners are square.
Fitting the cleats
Fit the 1×6 cleats to the interior sides of the bed frame and the 2×6 support to the middle of the frame, as described in the diagram. Drill pocket holes at both ends of the cleats and secure them to the frame using appropriate screws and glue. Place the cleats 3/4″ under the top edge of the side supports.
Attaching the support slats
Afterwards, fit the 1×4 support slats to the cleats and secure them into place using 1 1/4″ screws. Add glue to the joints and remove the excess with a damp cloth. Make sure you place the supports equally-spaced and check if the corners are square after adding each component into place.
King platform bed plans
Last but not least, we recommend you to take care of the finishing touches. Fill the holes with wood filler and let it to dry out for several hours. Afterwards, smooth the wooden surface with fine-grit sandpaper and vacuum the residues.
If you want to download the plans. just click on the GET PDF PLANS button bellow.
Thank you for reading our project about king platform plans and we recommend you to check out the rest of the projects. Don’t forget to share our projects with your friends and LIKE us, by using the social media widgets. SUBSCRIBE if you want to be the first that gets our latest articles and to help us keep adding free plans.
