Making A Router Edge Guide

By Todd Fratzel on Power Tools

Finally I’m in the process of building the “skirt” around the base of our large farmers porch. I’ve decided to make the “skirt” with all PVC material so it will last for years to come without painting! The basic design is to create the “frames” with 1×6 material and then install lattice between the rails. I want to put a rabbit in the back of the 1×6 to hold the lattice. This way the lattice doesn’t need to be nailed so it can expand and contract freely with temperature.

The problem I have is the 1×6 PVC trim is 18′ long and looks like a wet noodle when you try to pick it up and move it. So trying to either use a dado on the table saw or trying to use the router table will only frustrate me and quite possibly cause an injury. So my idea was to just buy a cheap router edge guide/fence and put the material on the ground and route out the rabbit. Wouldn’t you know that I can’t find one to fit my router.

Well today I found a simple do it yourself router edge guide that I could make myself. I’m going to make the base out of 1/2″ MDO and the fence I’ll either use MDO or maybe a piece of hardwood if I’ve got a scrap kicking around. Once I get this built I’ll start putting rabbits in all the 1×6 stock. I’ll keep you posted on how it works once I’ve built it.

Router Edge Guides For Sale
Porter-Cable 42690 Edge Guide
Bosch RA1054 Deluxe Router Edge Guide
Milwaukee 49-54-1035 Router Edge Guide
Freud FT2010 Deluxe Edge Guide

About the author

Todd Fratzel

I'm full time builder for a large construction company in New Hampshire. I run their design-build division that specializes in custom homes, commercial design-build projects and sub-divisions. I'm also a licensed civil and structural engineer with extensive experience in civil and structural design and home construction. My hope is that I can share my experience in the home construction, home improvement and home renovation profession with other builders and home owners. I'm also the Editor-in-Chief and Founder of Tool Box Buzz. Please feel free to contact me if you have any questions, suggestions or you'd like to inquire about advertising on this site.

All posts by Todd »

Not what you're looking for?

Search for more articles here. Enter keywords like, 'insulation' or 'kitchens' etc to find your topic.

No Comments

No comments yet.

Leave a comment

Be nice. Keep it clean. Stay on topic. No spam.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Copyright © 2009-2023 Front Steps Media, LLC. All Rights Reserved. Home Construction & Improvement™ is a Trademark of Front Steps Media, LLC.