Canvas Headboard With Nail-Head Trim

Transform a painter's canvas and carpet tacks into a contemporary yet rustic upholstered headboard.
DIY canvas headboard

Dan Faires Canvas Headboard

Give your headboard a custom look at a low price using canvas board. Designer Dan Faires took standard canvas board and embellished it with nail head trim. This no-sew project has the same look as an upholstered designer headboard.

Materials Needed:

  • 4x8 plywood
  • chalk line
  • batting
  • painter's canvas
  • string or twine
  • nail-in carpet tacks
  • spray adhesive
  • circular saw
  • hammer
  • tape measure
  • stapler and staples
  • scissors

Measure and Mark

Measure the width of your existing bed frame. Lay the 4x8 plywood on a sturdy surface. With the four-foot side as your height, mark the width to match your bed frame.

Cut the Plywood

Using a circular saw, cut the plywood to your dimensions. To make sure your lines are perfectly straight, use a chalk line to mark your measured width.

Lay Out Batting

Lay four layers of batting over the plywood, allowing several extra inches of batting on all sides of the plywood.

Dan Faires Canvas Headboard With Nail Head Trim 6

Spray Adhesive

Pull back the batting and spray a generous amount of fabric adhesive on the plywood surface. Place the batting firmly back on to the plywood.

Dan Faires Canvas Headboard With Nail Head Trim 7

Attach Batting

Flip the headboard over, so batting is facing down, and attach the batting to the back of the headboard. Begin by stapling at center point of each side, and then at each corner, pulling the batting tautly around frame. After sides and corners are stapled in place, continue securing the batting to frame by working from center point to corner. Trim excess material.

Lay Out Canvas and Spray Adhesive

Flip the headboard back over, and drape the painter's canvas on top of the batting, centering it so there are extra inches of canvas on all sides of the headboard. Pull back the painter's canvas and spray the fabric adhesive directly to the top layer of batting. Press the painter's canvas on top of the batting, making sure there are no bumps or wrinkles in the canvas.

Dan Faires Canvas Headboard With Nail Head Trim 11

Attach Canvas

After the adhesive is dry, stand the headboard on its side and staple the canvas to the back of the headboard, starting with the top and bottom. Begin by stapling at center point and working out to the sides, pulling the canvas tautly around frame.

Staple Corners

Once the top and bottom are stapled in place, start in one corner, pull the canvas from the side taut and fold over to create a clean seam. Staple into place, and continue stapling down the side until you reach the next corner. Pull the canvas taut and fold over to create a clean seam on this corner and staple into place. Repeat on the other side.

Dan Faires Canvas Headboard With Nail Head Trim 12

Prepare a String Guide

Measure four inches in on either side of each corner of the headboard. Mark with a fine-tipped marker, and gently tap a nail-in carpet tack over the mark. Do not hammer all the way into the plywood. Loop the string or twine around each carpet tack, creating a straight line guideline for the tacks.

Mark for Carpet Tacks

Take a tape measure, and using a fine-tipped marker, mark a dot every inch. Remove the string guide, and hammer down the corner tacks.

Dan Faires Canvas Headboard With Nail Head Trim 16

Hammer in Tacks

Hammer in a carpet tack over each marker dot on the canvas.

Dan Faires Canvas Headboard With Nail Head Trim 17

Secure the Headboard

Secure the headboard to the bed or directly to the wall.

Dan Faires Canvas Headboard With Nail Head Trim 3

Next Up

How to Make a DIY Tufted Headboard From Pool Noodles

Pool noodles in the bedroom? Yes, it sounds sketchy but trust us — if you can handle a staple gun, you can make this dreamy DIY headboard. Dive on in!

The Best Headboards for Every Style and Budget

Find your perfect match and transform your bedroom for the better.

Upholstered Headboard With Nail Head Trim

Create a dramatic focal point in your bedroom with a custom, upholstered headboard that extends to the ceiling.

Make an Easy Headboard Slipcover

Update a basic wooden headboard with a simple slipcover using no staples or batting just interesting fabric, ties and a monogram.

How to Make a Bulletin Board Headboard

Short on space? No problem! Create a beautiful headboard that does double duty as a bulletin board or jewelry display in your dorm room.

How to Make a Geometric Wood Headboard

If you're looking for a stylish way to add personality and color to your bedroom, then this DIY modern art headboard is the perfect project for you.

How to Upholster a No-Sew Headboard

Update your bedroom with an upholstered headboard without bringing out the sewing machine.

Coastal Cottage-Style Shutter Headboard

Easily create this inexpensive yet impressive headboard using unfinished shutters, paint and sandpaper.

How to Make a Headboard Out of Old T-Shirts

Kids often have a hard time parting with their favorite T-shirts even after they've outgrown them. Use their old T-shirts, sport jerseys or old blankets to create a collage of color over their bed.

Update a Bunk Bed With Paint and Drapery Panels

Add designer flair to a kids' room by transforming a basic bunk bed with ceiling-mounted hardware, floor-to-ceiling drapery panels and a fresh coat of paint.

Go Shopping

Get product recommendations from HGTV editors, plus can’t-miss sales and deals.

On TV

Follow Us Everywhere

Join the party! Don't miss HGTV in your favorite social media feeds.