Magazine Rack Woodworking Plan Magazine Rack Woodworking Plan WOOD®Store Looking for a project to test your skills in joinery? This magazine rack features a center-lap joint that not only crosses at an oblique angle, but is tapered to boot! It begs to be cut by hand, and ... 31_MD_00236 31-MD-00236 5.95 WoodworkersWorkshop

Magazine Rack Woodworking Plan

31-MD-00236 - Magazine Rack Woodworking Plan
Looking for a project to test your skills in joinery? This magazine rack features a center-lap joint that not only crosses at an oblique angle, but is tapered to boot! It begs to be cut by hand, and we will show you how.

Finished Dimensions
Height: 11 inches (27.9 cm)

Plan Author: Jay Taylor

Plan Contributors: Marlen Kemmet, Roxanne LeMoine, Kim Downing, Jamie Downing, Bill Zaun

Published Date: 2002

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed: We used oak, but you can use a wood of your choice. A full cutting diagram and materials list is included with the plan.
1 of 3/4 x 3-1/2 x 96 inch oak lumber
1 of 1/2 x 5-1/2 x 72 inch oak lumber
1 of 1/2 x 7-1/4 x 36 inch oak lumber

Tools needed: Table saw, band saw, belt sander, drill, router and other common workshop tools.

Your Total:

31-MD-00236 - Magazine Rack Woodworking Plan Selection

31-MD-00236PAPER - Magazine Rack Woodworking Plan - Paper plan
USD 8.95 | 8 Points | In Stock
31-MD-00236PDF - Magazine Rack Woodworking Plan - PDF plan
USD 5.95 | 5 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 3.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 7.95 | In Stock
About
Copyright Statement

You Might Also Like...

Basic Magazine Table Downloadable Scrollsaw Woodcrafting Pattern

A basic build table that can make use of scrap wood boards or recycled pallet pieces.

From USD 2.95
1 Point | In Stock
Colonial Magazine Rack Downloadable Scrollsaw Woodcrafting Pattern

This project does require an angle cut, some curve cutting of the decorative scrolls and some fairly accurate drilling.

From USD 2.95
1 Point | In Stock
Wall Mount Rack Downloadable Scrollsaw Woodcrafting Pattern

This attractive country style basket rack could be mounted to any flat surface or make two and place them back to back of each other. An excellent tool tote in the garden too. This project does require...

From USD 2.95
1 Point | In Stock
Pallet Slat Tote Rack Downloadable Scrollsaw Woodcrafting Pattern

This is a nice design that may be made with good workmanship and a nice finish for personal use or bang them out with glue, finish nails and a coat of stain for inexpensive products to sell.

From USD 2.95
1 Point | In Stock
Wall Mount Rack Downloadable Scrollsaw Woodcrafting Pattern

We really enjoy this simple design because it may be made shorter or longer, narrower or wider without taking up any more floor space.. Formerly called Wall Magazine Rack.

From USD 2.95
1 Point | In Stock
Magazine Rack Woodworking Plan.

This side table includes a rack for your magazines and newspapers. Shown here with Table Lamp plan W2054. This woodworking plan provides full size illustrations, exploded view diagrams and instructions to make the projects shown.

USD 11.99
11 Points | In Stock
Magazine Rack and Toilet Paper Holder Woodworking Plan Set.

Two important bathroom items, both within easy reach! This magazine rack is a compact size 20 inches high x 13 inches wide x 11 inches deep. This woodworking plan provides full size illustrations, exploded view diagrams and instructions to make the projects shown.

USD 8.99
8 Points | In Stock
Open Magazine Rack Woodworking Plan

Each of the six shelves can accommodate nearly 20 magazines! Multiple shelves make it simple to keep periodicals and books organised. Removes the issue of missing or lost magazines. 1x12 inch boards make for a simple build.

USD 17.99
17 Points | In Stock
Bathroom Magazine Rack Woodworking Plan.

How to build a wall mounted rack to store reading magazines or other materials on a bathroom wall. This woodworking plan provides full size illustrations, exploded view diagrams and instructions to make the projects shown.

USD 11.99
11 Points | In Stock
Magazine Spindle Rack Woodworking Plan.

This magazine rack will keep all of your magazines nice and meat and right at hand. Easy to build from 3/4 and 1/4 inch thick lumber. The finished project measures 15-1/2 inches long, 10-1/8 inches wide and 14-1/2 inches high.

USD 11.99
11 Points | In Stock
Free Plans and Resources

We have been compiling the most comprehensive directory of internet woodworking information since 1998.

Our daily updates include new pre-approved, hand-selected DIY project resources. We do a lot of effort to ensure that our database only includes safe, correct woodworking designs for hobby crafters and woodworkers.

Visit Resources & Free Plans

Banner Adverts
4 Board Table Top Reindeer Scrollsaw Project
Mary Joseph Baby Jesus and Sheep Nativity Yard Art Woodworking Pattern.
Grinch Christmas Gifts in the Bag! Yard Art Woodworking Pattern
Nativity Scene - Angel Yard Art Project
Santa Camo-Claus Kneeling Yard Art Woodworking Plan
Nutcracker 8 ft tall Yard Art Woodworking Pattern
Santa Claus and Rudolph Yard Art Woodworking Pattern
Sasquatch Family Yard Art Woodworking Pattern
Santa Claus with Camouflage Kneeling Yard Art Woodworking Plan
RCMP Memorial Ribbon Yard Art
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2024 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. Exec Time: 0.054989 Seconds Memory Usage: 1.636574 Megabytes
Kryptronic