Transcript

This Window Seat Offers a Good View and Plenty of Out-of-Sight Storage

Maximize the function and appearance of your nook by building a custom window seat. This project will leave you with a new look that makes a great space to relax, as well as giving you precious storage space that is hidden away and out of sight.

Read More
Using a cradle with the table saw
Step 1

Cut the Sides, Bottom and Top

After you have determined the best design for the space that you have available, begin by cutting out the large pieces that you will need to construct the seat. These are best cut out of plywood on a table saw. Use a cradle with a work stop to ensure that all of the pieces are the proper size. Once you measure and cut the first piece, the remaining cuts can be made against the stop, thus eliminating the need to measure each time and minimizing the chances that you'll make mistakes.

Using a joiner clamp to hold the sides in place
Step 2

Assemble the Bottom and Sides

Begin the assemble process by attaching the end pieces to the bottom. You may find it helpful to use joining clamps to hold the corners in place after you've glued them. These clamps allow you to have both hands free for the nail gun.

Securing a side piece to the end piece and bottom assembly
Step 3

Finish the Box Assembly

After the end pieces are secured to the bottom, use the same nail and glue techniques to attach the sides. The joiner clamp will come in handy again with this step. Take care not to blow any nails through the sidewalls of the box when using the nail gun.

Setting the wooden biscuits into the notches created by the plate joiner
Step 4

Finish the Top

In order to finish the top, you will need to attach a strip of solid wood to the piece of plywood that you cut out for the seat. The best way to do this is using a plate joiner and wooden biscuits. Once you have the biscuits glued in and lined up, use a rubber mallet to firmly set the wooden strip into place. This joint should be clamped with a fair amount of pressure and left to dry.

Laying out the recessed base frame
Step 5

Finishing Touches for the Box Seat

The box seat will sit on a recessed base frame, made of 1x4 stock. This base can be attached with glue, but take care not to nail through the bottom of the box, leaving points exposed. Additional strips of plywood also need to be nailed around the perimeter of the box top. These strips will act as a frame for the lid once it is installed with piano hinges.

Setting the triangular base into place
Step 6

Construct the End Tables

The end tables will be constructed using the same techniques that were used to build the seat box. The only difference is that these must be triangular in order to fit in the nook's opening. Be creative with how you choose to incorporate shelves into these units. This is a great opportunity for you to customize the furniture based on your own unique storage needs.

Priming the end table
Step 7

Prime and Paint

You will need to prime and paint the raw wood in order to protect it, as well as give it a finished appearance. When painting raw wood for the first time, make sure you use a primer with stain resistance. This will help prevent the natural resins in the wood from bleeding through and discoloring your top coat of paint. If you use a high quality primer, then one topcoat should suffice. If you aren't happy with the way that looks, a second coat won't hurt.

Driving hinge screws
Step 8

Add Hardware

The final step before setting the new window seat into place is to add the hardware. In this case, the hardware is piano hinges that will be durable enough to withstand the weight of the lids that also act as seats. Begin by securing the hinges to the lids with screws, and then complete the process by screwing hinges into the boxes.

Related Tips

Blog Articles

June 08, 2023

Maximize Your Yield with DIY Netting for Strawberry Beds

Keep your strawberries safe from pests with our DIY strawberry cage netting solution. Learn how to create sturdy frames and find the best netting for your strawberry plants.

June 06, 2023

Change It Up: Swapping Out Your Light Switch Plates

Tired of boring light switch covers? Upgrade your home decor with this simple guide on replacing light switch plates and make a statement in every room.

May 16, 2023

Revamp Your Outdoor Space: How To Stencil A Concrete Patio

Learn how to create a stunning patterned concrete patio with our easy-to-follow instructions for stenciling. Upgrade your outdoor space in no time.


Recent Articles