banner468x60.gif - 6000 Bytes
This project appeared in our May 23rd, 2003 Newsletter.

I love projects like this because it cost me almost nothing. I made it all from scraps that I had lying around. Cedar fence scraps made up the bulk of it.


Here's what you'll need:
  • 24' X 6" X 3/4" Cedar.
  • 6"'X 2" X 2" Maple or your choice of wood.
  • Deck screws
  • Finish nails
  • Glue
Dimensions

Click on the picture for bigger view of this project.

Cut the three bottom boards 4 3/4" X 27".
Cut ten side boards 5" X 7".
Cut four end boards 4 11/16" X 7" and two end boards 2 1/2" X 7".
Cut the top boards with a 45 degree miter on each end, two 3 1/2" X 28 1/4" and two 3 1/2" X 15 1/2".
Cut six frame boards 2" X 2" X 24" and six 2" X 2" X 9".
Assemble the three frames with the 9" pieces to the inside of the but joints. Use glue and deck screws. It's best to pilot drill the screw holes through the long pieces.


Align the bottom boards with about 1/8" space between each board. This will allow water to run out.
Set one of the frames onto the bottom boards, center it, glue and screw it in place.

Mount the second frame on top of the bottom, centered, glued and screwed as above.

Now build the top by gluing and screwing the last frame onto the mitered top.

Glue and nail the side and end boards onto the bottom frame. The 5" boards go on the sides. Space them beyond the frame one board thickness on each end.

The two 4 11/16" boards go on the outside of the ends and the 2 1/2" goes in the middle.
Put the top inside the side and end boards.

Glue and nail the side and end boards onto the top.

That's it! It's pretty easy to build and really looks great.



Return to Projects

VISIT RunnerDuck HOME PAGE

Our Newsletter
The AllAmerican RunnerDuck Review


Visit our Blog, www.runnerduckreview.wordpress.com, and sign up to receive notifications when it is updated. Our newsletter is a monthly blog with woodworking projects, crafts, recipes, and more.

When you get to our blog just enter your email address and click "Sign Me Up".

This is what it looks like: