How to Make and Play a Hammered Dulcimer

1 / 11
A charming, old-time musical instrument returns to our midst.
A charming, old-time musical instrument returns to our midst.
2 / 11
Figure 2: Top view.
Figure 2: Top view.
3 / 11
Figure 1: Inside view.
Figure 1: Inside view.
4 / 11
Figure 3: Pin patterns.
Figure 3: Pin patterns.
5 / 11
Figure 5: Tuning the pins.
Figure 5: Tuning the pins.
6 / 11
Figure 4: Front view.
Figure 4: Front view.
7 / 11
Figure 6: Dulcimer hammer pattern.
Figure 6: Dulcimer hammer pattern.
8 / 11
String-course numbering system.
String-course numbering system.
9 / 11
"Camptown Races"
10 / 11
Two chord possibilities.
Two chord possibilities.
11 / 11
Tuning chart, and how tuning relates to musical notation.
Tuning chart, and how tuning relates to musical notation.

<p>Homemade music is alive and well. In fact, it’s experiencing a brisk revival, and, as a result, some wonderful musical instruments have been rescued from obscurity. One of these is the hammered dulcimer: a delightful “tune box” which was, until around the turn of the century, very popular in our country. Fortunately, a small enclave of devoted players stuck with this instrument during its years of low popularity, and now its distinctive, happy voice is being heard again throughout the land. Luthiers are turning out dulcimers in great numbers, and many recordings are being made that feature the instrument in a wide variety of musical settings. </p>
<p>Some of the hammered dulcimers built today are truly works of art. Designed and constructed by fine craftspeople, they’re made of top-quality–and often exotic–woods, and many of them incorporate exquisite ornamentation to match their beautiful sound. The cost of professionally built dulcimers can range anywhere from several hundred to several thousand dollars, depending on the instrument’s size and the degree of craftsmanship involved. With a modicum of tools and experience, however, you can build a hammered dulcimer that will have a lovely, clear, and brilliant voice (dulcimer, after all, means “sweet song”). The necessary materials are readily available, and the basic construction is little different from building a box. Furthermore, the total cost of your homemade product should run around $25! </p>
<h2>Basic Materials for Making a Dulcimer</h2>
<p>The pin blocks, frame, internal bridge braces, and the bridges themselves will have to be made from fairly strong hardwood, such as white oak, maple, cherry, or walnut. However, the most crucial wood is that used for the pin blocks: It must be dense enough to grip the tuning pins tightly, and strong enough to take the great stress imposed by taut strings. Maple is the material most often used for these components, but many good hardwoods will suffice. (In fact, I’ve constructed some dulcimers using oak recycled from wooden pallets.) Glancing at the list of materials below, you’ll notice that the pin blocks are made from 2 × 4 stock. If you have difficulty locating appropriate pieces of this size, you can make your own by laminating several thinner hardwood boards together. For example, by joining three 3/4″ × 3 1/2″ planks, you can produce a block that’s 2-1/4″ thick. You’d then have to use 2-1/4″-wide pieces for the frames and inside braces as well, but this wouldn’t interfere with the instrument’s “voice” in any way.</p>
<p>The dulcimer’s top (soundboard) and bottom can be made from plywood, anything from A-C grade fir on up to the top grades will do. For dulcimer construction, the beauty of plywood lies in its enormous strength and dimensional stability, which will add much to the structural integrity and longevity of your instrument. The acoustical qualities of plywood panels are especially well suited to the dulcimer, producing a very desirable sound without too much <i>sostenuto</i> (sustainment of tone).</p>

  • Published on Sep 1, 1983
Comments (0) Join others in the discussion!
    Online Store Logo
    Need Help? Call 1-800-234-3368