ArborTech Tools
Sanding discs, 2 inch (51 mm) diameter, 25 pcs, assorted grit with 2 flanges and 2 screws and 1 hex key.
63_SAN_FG_CL20005
63-SAN-FG-CL20005
12.71
WoodworkersWorkshop
https://woodworkersworkshop.com/store/Item/63_SAN_FG_CL20005
ArborTech Tools
Sanding discs, 2 inch (51 mm) diameter, 25 pcs, assorted grit with 2 flanges and 2 screws and 1 hex key.
63_SAN_FG_CL20005
63-SAN-FG-CL20005
12.71
WoodworkersWorkshop
https://woodworkersworkshop.com/store/Item/63_SAN_FG_CL20005
Sanding discs, 2 inch (51 mm) diameter, 25 pcs, assorted grit with 2 flanges and 2 screws and 1 hex key. Note: Single item purchase may be repacked for shipping to reduce cost of shipping for you.
This accessory will turn your angle grinder into a precision shaping tool. The clear, tough polycarbonate shield will allow you clear view of your work while redirecting the wood chips away from you. ...
These replacement carbide teeth are for the Arbortech™ Industrail Woodcarver blade #63-IND-FG-100. The package contains 3 of K40 grade tungsten carbide teeth. The teeth are hollow ground and are set i...
These replacement screws are for the Arbortech™ Industrail Woodcarver blade #63-IND-FG-100. The package contains three of M3 Torx™ screws. The screws are high quality grade 12.9 Torx™ 9 head. This acc...
This replacement Torx™ key are for securing Torx™ M3 screws, found on the Arbortech™ Industrail Woodcarver blade #63-IND-FG-100. The package contains one key. This accessory tool can be used with the ...
Fits most 4 inch (100mm) and 4.5 inch (115mm) angle grinders. Suitable for carving, cutting, shaping, trenching and trimming wood. Highly recommended to be used with the Arbortech™ Pro-Guard #63-ACC-F...
Fits most 4.5 inch (115 mm) and 5 inch (125 mm) angle grinders. Featuring 3 carbide teeth, this multi-purpose blade can be used to cut through most materials, except cement based materials. Will cut t...
Fits most 4 inch (110 mm) and 4.5 inch (115 mm) angle grinders. Featuring the 3 carbide teeth blade (see #63-IND-FG-100) and Pro-Guard kit (see #63-ACC-FG-100). Turn your angle grinder into a fully fu...
Rapid removal of wood material with the ease of free hand styling. Tungsten carbide teeth means long life and only requires easy touch up maintenance with a diamond lap stone file.
This shaft kit can extend the reach of your wood carving activity by a depth of 3 inches (76 mm). Suitable for 4 and 4.5 inch (100 and 115 mm) angle grinders. The carbide blade at the end allows the s...
This hardened steel round file is 5/32 inch (4 mm) diameter), suitable for the mini carver blades used with the Arbortech™ product line of power carving woodworking tools.
