Tealight Candle Holders Set of 20 Scrollsaw Patterns Tealight Candle Holders Set of 20 Scrollsaw Patterns Sheila Landry Designs All 20 patterns included! Three dimensional patterns included are: Bear and Cub, Bison, Rabbits, Elk, Cats, Howling Coyote, Hawk, Egret, Dueling Caribou, Horse, Hummingbird, Labrador Retriever, Trout... 48_SLDTLSET1 48-SLDTLSET1 49.00 WoodworkersWorkshop
Location
Home / Scrollsaw Patterns / Candleholders Scrollsaw Patterns / Tealight Candle Holders Set of 20 Scrollsaw Patterns

Tealight Candle Holders Set of 20 Scrollsaw Patterns

48-SLDTLSET1 - Tealight Candle Holders Set of 20 Scrollsaw Patterns
All 20 patterns included! Three dimensional patterns included are: Bear and Cub, Bison, Rabbits, Elk, Cats, Howling Coyote, Hawk, Egret, Dueling Caribou, Horse, Hummingbird, Labrador Retriever, Trout, Duck, Moose, Bird on branch, Swan, Tree frog, Salmon and a pair of Howling Wolves. These are simple projects for a beginner scroll sawyer and is a good project to make for gifts and craft shows. Full instructions for cutting and assembly are included. A good scrap wood project.

Plan Author: Sheila Landry

Published Date: 2012

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed:
Wood needed to make one tealight candle holder:
One piece of wood (plywood or hardwood) 4 inch x 4 inch x 1/8 inch thick, 1/4 inch thick, or 3/8 inch thick for face piece.
One piece of wood (plywood or hardwood) 4 inch x 2 inch x 1/8 inch thick for overlay piece.
Fully detailed supply list is included with the plan

Tools needed: Scrollsaw and other common workshop tools

Your Total:

48-SLDTLSET1 - Tealight Candle Holders Set of 20 Scrollsaw Patterns Selection

48-SLDTLSET1PAPER - Tealight Candle Holders Set of 20 Scrollsaw Patterns - Paper plan
USD 52.00 | 52 Points | In Stock
48-SLDTLSET1PDF - Tealight Candle Holders Set of 20 Scrollsaw Patterns - PDF plan
USD 49.00 | 49 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Maritime Lantern Woodworking Plan

Create your own maritime lantern! You can probably make this with scrap wood you have in your workshop. Use the glass or not, you could even use mirror on two sides to enhance the lighting produced by...

From USD 4.95
2 Points | In Stock
Modular Candle Stand Downloadable Scrollsaw Woodworking Plan

A very simple project to build and one that you can build on. Make as many panels as you want and arrange them in whatever way pleases you. You can make your own candle cups from blocks of wood or buy...

From USD 2.95
2 Points | In Stock
Turned Candleholders Woodworking Plan

These tulip shaped candle holders make a great gift. Armed with a degree in woodworking and furniture design from Indiana University of Pennsylvania, Mark Burhans headed for the lathe to put his...

From USD 5.95
5 Points | In Stock
Wall Sconces Woodworking Plan

Add ambiance to any room with these candleholders, made from cherry and accented with copper tray liners and back inserts. Finished projects measure 8, 12, and 16 inches high.

From USD 5.95
5 Points | In Stock
Bright Idea Candleholders Woodworking Plan

Combine salvaged bits of exotic wood with leftover hardwood scraps to give this votive candleholder a special glow. The legs require so little wood, you can splurge on exotics such as wenge or mahogany...

From USD 5.95
5 Points | In Stock
Elegant and Easy Candleholders Woodworking Plan

This made-in-a-weekend gift will brighten the day of the recipient, but you get something out of it, too: use a for some small scraps too good to throw out. In our stash of cutoffs, we found maple and...

From USD 5.95
5 Points | In Stock
Fretwork Cross Candle Holder Downloadable Scrollsaw Pattern

This scroll saw pattern makes a beautiful fretwork cross which holds a votive candle. You can either use plexiglas behind the cross, or use Envirotex Lite resin to make your own colored background...

From USD 3.95
3 Points | In Stock
Dragonfly Wall Sconce Scrollsaw Pattern

This original pattern features a fretwork wall sconce with a dragonfly and wild flower motif and overlay lily pads on the base. Accommodates a votive candle (with a glass or flameproof holder). This...

From USD 3.95
3 Points | In Stock
Snowflake Tea Light Candle Holders Scrollsaw Pattern

These snowflake tea light candle holders will add sparkle to your holiday decor. Three different snowflake designs are included and you can use battery-operated tea lights as well. They can be finished...

From USD 4.95
4 Points | In Stock
Snowflake Candle Tray Scrollsaw Pattern

This snowflake candle tray will help protect your table and add to the festive atmosphere that candles bring. The tray is made from a single piece of wood and the pattern also includes two inch charms...

From USD 5.95
5 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2018 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2018 Kryptronic, Inc. Exec Time: 0.107292 Seconds Memory Usage: 6.941223 Megabytes
Kryptronic