Rearing Horse Self Framing Portrait Scrollsaw Pattern Rearing Horse Self Framing Portrait Scrollsaw Pattern Sheila Landry Designs A beautiful yet simple rearing horse plaque for horse lovers. While there are not a lot of cuts in this project, some of the small details are challenging therefor this project is an intermediate... 48_SLDK204 48-SLDK204 5.95 WoodworkersWorkshop
Location
Home / Scrollsaw Patterns / Horses Scrollsaw Woodworking Patterns / Rearing Horse Self Framing Portrait Scrollsaw Pattern

Rearing Horse Self Framing Portrait Scrollsaw Pattern

48-SLDK204 - Rearing Horse Self Framing Portrait Scrollsaw Pattern
A beautiful yet simple rearing horse plaque for horse lovers. While there are not a lot of cuts in this project, some of the small details are challenging therefor this project is an intermediate level scroll saw pattern. This is an original, professionally drawn, scrollsaw pattern with complete instructions and full color photos.

Finished Dimensions
Height: 10 inches (25.4 cm)
Width: 8 inches (20.3 cm)

Plan Author: Keith Fenton

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed:

  • 1 piece of 8 x 10 x 3/8 (to 1/2) inch thick hardwood for the plaque
  • 1 piece of 6 x 8 x 1/8 inch thick Baltic birch or similar plywood for the backer
  • Fully detailed supply list is included with the plan.

Tools needed: Scrollsaw and other common workshop tools

Your Total:

48-SLDK204 - Rearing Horse Self Framing Portrait Scrollsaw Pattern Selection

48-SLDK204PAPER - Rearing Horse Self Framing Portrait Scrollsaw Pattern - Paper plan
USD 8.95 | 8 Points | In Stock
48-SLDK204PDF - Rearing Horse Self Framing Portrait Scrollsaw Pattern - PDF plan
USD 5.95 | 5 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Country Mini Plaques Swan Horse and Pig Woodcrafting Pattern

Mix and match these two patterns and the project ideas with our other Country/Primitive Patterns pages! Do not be afraid to experiment! Make a Decorative Candle Holder or Base by gluing a candle cup o...

From USD 2.95
1 Point | In Stock
Horse Forest Leaf Plaque Scrollsaw Pattern

This is an original pattern for a rearing horse on the hillside in a maple leaf shaped scroll sawn frame. Baltic birch plywood was used for the backboard and can be painted or stained depending on the...

From USD 4.95
4 Points | In Stock
Little Leaves Horses Scrollsaw Pattern

We are not horsing around when we say that these patterns are an ideal way to make use of left over scrap wood. This fretwork pattern package includes three horse scrollsawing patterns in two...

From USD 6.95
6 Points | In Stock
Horse Drawn Sleigh Plaque Scrollsaw Pattern

This easy to make plaque will be a great addition to you holiday decorating or gifts. Clear and simple to follow instructions will make it a fun and inspiring project. This is an original, professiona...

From USD 6.95
6 Points | In Stock
Pegasus and Unicorn Fantasy Overlay Plaques Scrollsaw Patterns

This set of two overlay plaques depict a unicorn and pegasus, and when complete each plaque fits in a standard 8 x 10 inch frame. The backboard can be stained or painted with the instructions included...

From USD 7.95
7 Points | In Stock
Wild Horses Self Framing Plaque Scrollsaw Pattern

A great gift for any horse lover, this easy-to-cut plaque uses a bevel cut between the frame part and inside plaque so that the inside sits recessed from the frame.

From USD 5.95
5 Points | In Stock
Rearing Horse Self Framing Portrait Scrollsaw Pattern

A beautiful yet simple rearing horse plaque for horse lovers. While there are not a lot of cuts in this project, some of the small details are challenging therefor this project is an intermediate...

From USD 5.95
5 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2018 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2018 Kryptronic, Inc. Exec Time: 0.105076 Seconds Memory Usage: 6.743866 Megabytes
Kryptronic