Cheese Tray Scrollsaw Pattern Cheese Tray Scrollsaw Pattern Sheila Landry Designs This whimsical cheese tray is fun to make with your scroll saw and there are a few options on finishing it. The one shown has an optional Corian insert but it can also be made out of wood. This one... 48_SLD392 48-SLD392 4.95 WoodworkersWorkshop
Location
Home / Scrollsaw Patterns / Misc Scrollsaw Patterns / Cheese Tray Scrollsaw Pattern

Cheese Tray Scrollsaw Pattern

48-SLD392 - Cheese Tray Scrollsaw Pattern
This whimsical cheese tray is fun to make with your scroll saw and there are a few options on finishing it. The one shown has an optional Corian insert but it can also be made out of wood. This one was made of maple, and the center piece is cut on an angle so that the inside piece forms a lip and the pre-purchased glass dome stays nicely in place.

Finished Dimensions
Width: 9 inches (22.9 cm)

Plan Author: Sheila Landry

Published Date: 2012

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed:

  • One piece of wood 9 x 9 x 3/8 (to 1/2) thick for the tray
  • One piece of Corian® or wood 6 x 6 x 1/2 inch thick for the tray insert
  • Fully detailed supply list is included with the plan.

Tools needed: Scrollsaw, drill press, orbital sander, router and other common workshop tools

Your Total:

48-SLD392 - Cheese Tray Scrollsaw Pattern Selection

48-SLD392PAPER - Cheese Tray Scrollsaw Pattern - Paper plan
USD 7.95 | 7 Points | In Stock
48-SLD392PDF - Cheese Tray Scrollsaw Pattern - PDF plan
USD 4.95 | 4 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Casserole Dish Holder Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. Surprisingly simple to make. Beginner skill level.

From USD 2.95
1 Point | In Stock
Spaghetti Gauge Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. For al you pasta lovers out there, here is a quick way to manage your portions. Beginner skill level.

From USD 2.95
1 Point | In Stock
TV Guide Stand Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. Pretty sure they no longer print TV guides but if you are thinking about decorating old school, here is one way hit pau...

From USD 2.95
2 Points | In Stock
Candle Box Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. Back in the day, there was a necessity for candles and they had to be within easy reach. They still serve a use even to...

From USD 2.95
1 Point | In Stock
Handy Recipe Card Holder Woodworking Crafts Pattern

These are designed to hold recipe cards for easy reading without getting food stains on the cards! Simple and handy projects from scrap pieces of 2 x 4. We try to use every scrap of wood left over fro...

From USD 2.95
1 Point | In Stock
Pizza Peel Woodworking Plan

Its long handles guarantees safe handling. To design the worlds best pizza peel we enlisted the help of the experts in the worlds best kitchen, the same home economists who test all of the recipes that...

From USD 7.95
7 Points | In Stock
Cookbook Holder Woodworking Plan.

Just say -no- to spatters, and -yes- to easy reading. Your favorite chef will appreciate this holders heavy, tempered-glass shield that wipes clean and holds pages open for viewing. Its 3 inch wide...

From USD 5.95
5 Points | In Stock
Bakers Trio Woodworking Plan.

Build one or more pieces of this set that includes a pastry board, rolling pin, and wall rack. At the heart of this set is a pastry board with dotted circles that help you roll out dough to uniform si...

From USD 9.95
9 Points | In Stock
Trivet Pursuit Lathe Turned Woodworking Plan

Behind the complex maze of intersecting grooves that make up these two-sided turned kitchen accessories lies a very simple process. This method incorporates a simple offset turning technique and uses ...

From USD 7.95
7 Points | In Stock
Serving Tray with Routed Inlay Woodworking Plan

Does the look of inlays impress you but the thought of making them give you butterflies? Do not be concerned because we are going to teach you a no-hassle method to make perfect-fitting inlays in this...

From USD 7.95
7 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2018 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2018 Kryptronic, Inc. Exec Time: 0.104342 Seconds Memory Usage: 6.941452 Megabytes
Kryptronic