Router Table and Organizer Woodworking Plan Router Table and Organizer Woodworking Plan WOOD®Store When your router accessories have scattered around the shop like chips flung from a panel-raising bit, corral them in the drawers and cabinet of this virtually indestructible router table. You will ga... 31_MD_00729 31-MD-00729 9.95 WoodworkersWorkshop
Location
Home / Workbenches & Jigs / Router Table and Organizer Woodworking Plan

Router Table and Organizer Woodworking Plan

31-MD-00729 - Router Table and Organizer Woodworking Plan
When your router accessories have scattered around the shop like chips flung from a panel-raising bit, corral them in the drawers and cabinet of this virtually indestructible router table. You will gain a rock-solid work surface with easy router access for adjusting and changing bits. Next, we had four of our editors add accessories to make the table even more versatile. And finally, we show you what we think are the best routers for table mounting.

Wood and Supplies needed:
We used MDF, poplar, and birch plywood, but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Tablesaw, clamps, drill, jigsaw, router, drill press, bandsaw, common hand tools.

Your Total:

31-MD-00729 - Router Table and Organizer Woodworking Plan Selection

31-MD-00729PAPER - Router Table and Organizer Woodworking Plan - Paper plan
USD 12.95 | 12 Points | 3 In Stock
31-MD-00729PDF - Router Table and Organizer Woodworking Plan - PDF plan
USD 9.95 | 9 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Lift Up Router and Benchtop Tool Table Woodworking Plan Part 2.

We showed you how to make the end cabinets and the sturdy laminated top for the workbench, in Part 1, the Full-Service Workbench, 31-MD-00058 sold separately. Now, with the basics out of the way, lets...

From USD 9.95
9 Points | In Stock
Tilt Top Router Table Woodworking Plan

An open-and-close shop tool designed with you in mind. Count the features of this fully loaded router table, and you will quickly conclude that you have to have one. For starters, the table flips up f...

From USD 9.95
12 Points | In Stock
Benchtop Router Table Woodworking Plan

This project is a must in your shop and you can put it together in a weekend for less than $100 plus the cost of your own wood. Its fence adjusts in a flash and locks into T-slotted mini-tracks with t...

From USD 9.95
9 Points | In Stock
Mobile Sawing and Routing Center Woodworking Plan.

Increase the capacity of your tablesaw and router by combining them in one accommodating twin-cabinet design. The advantages include a larger tabletop, ample onboard accessory storage, and dedicated...

From USD 14.95
14 Points | In Stock
All Purpose Router Station Woodworking Plan

In its horizontal configuration, this router table is great for mortise and tenon work. A crank makes vertical adjustment convenient and accurate. For operations requiring traditional vertical orient...

From USD 9.95
9 Points | In Stock
Router Table Fence Woodworking Plan

This full-featured fence and a team of accessories make an unbeatable workshop combination. To add flexibility, the fence is designed to attach to a router table in just about every imaginable way. Af...

From USD 9.95
9 Points | In Stock
Fluting Jig Woodworking Plan

Mount your router to this simple-to-build jig, and guide it arrow-straight down the workpiece to rout flutes with dead-on precision.

From USD 2.95
2 Points | In Stock
Right Angle Router Table Push Pad Woodworking Plan

Not only does this simple guide keep stock perfectly square to the router fence, it also supports the back edge of the routed stock to minimize tear-out.

From USD 2.95
2 Points | In Stock
Keyhole Routing Jig Woodworking Plan

Hanging picture frames and mirror frames, shelves and plaques with keyhole slots can spell trouble if they are not exactly the same distance from the top of the project. Build this routing jig to fit ...

From USD 2.95
2 Points | In Stock
Router Table Backer Block Woodworking Plan

For flawless half-lap joints, rough cut them with a dado blade, then do some fine-tuning on your router table using this versatile helper.

From USD 2.95
2 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2018 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2018 Kryptronic, Inc. Exec Time: 0.110327 Seconds Memory Usage: 6.937965 Megabytes
Kryptronic