Tabletop Display Case Woodworking Plan Tabletop Display Case Woodworking Plan WOOD®Store Spend a few minutes fine-tuning our tablesaw miter gauge to exactly 45 degrees, and you will breeze through this project. Along the way, you will pick up valuable tips on cutting and gluing mitered ... 31_MD_00514 31-MD-00514 7.95 WoodworkersWorkshop

Tabletop Display Case Woodworking Plan

31-MD-00514 - Tabletop Display Case Woodworking Plan
Spend a few minutes fine-tuning our tablesaw miter gauge to exactly 45 degrees, and you will breeze through this project. Along the way, you will pick up valuable tips on cutting and gluing mitered frames. When you are finished, let the size of the items in your collection determine the number of glass shelves. We will show you how to finish the edges of the glass shelves right in your own shop. You can easily access the shelves and collectibles through a side door.

Finished Dimensions
Height: 15 inches (37.5 cm)
Width: 18 inches (45 cm)
Depth: 8 inches (20 cm)

Wood and Supplies needed:
We used mahogany and birch plywood, but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Tablesaw, clamps, drill press, disc sander, router, planer, table mounted router, bandsaw.

Your Total:

31-MD-00514 - Tabletop Display Case Woodworking Plan Selection

31-MD-00514PAPER - Tabletop Display Case Woodworking Plan - Paper plan
USD 10.95 | 10 Points | 2 In Stock
31-MD-00514PDF - Tabletop Display Case Woodworking Plan - PDF plan
USD 7.95 | 7 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Gun Cabinet for 8 Guns Woodworking Plan

Eight guns can be displayed behind the double glass doors of this fine piece. This cabinet has won blue ribbons at competitions for many woodworkers. The styling goes well with most modern and country...

USD 14.00
14 Points | Out Of Stock
Glass Topped Coffee Table Woodworking Plan

If you have a treasured collection of curios, you probably understand how difficult it can be to find just the right place to display it. But now, with this traditionally styled coffee table, you have...

From USD 9.95
9 Points | In Stock
Sliding Door Cupboard Woodworking Plan

Divided glass panes and traditional moldings give these stacked cabinets a stately look, while wide sides create deep, ample display room. You can make two cabinets and stack them, or build just one ...

From USD 14.95
14 Points | In Stock
Convertible Display and Gun Cabinet woodworking Plan.

You decide which version of this handsome cabinet to build: One displays your hunting rifles and shotguns, and the other showcases glassware or collectibles. Used as a gun cabinet, the case will hold ...

From USD 14.95
14 Points | In Stock
Bow Front Display Case Woodworking Plan

With its adjustable framed-glass shelves and open sides, this easy-to-build display case will let your collectibles really shine. But you will not have to collect a shopful of tools to build it. This ...

From USD 9.95
9 Points | In Stock
Curio Cabinet Woodworking Plan.

This is a vintage woodworking plan. Visit our FAQ page for a full definition. With large shelves and plenty of glass area, this curio cabinet will allow you to proudly display your finest curios and china.

USD 17.95
17 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2018 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2018 Kryptronic, Inc. Exec Time: 0.101782 Seconds Memory Usage: 6.625191 Megabytes
Kryptronic