Reading Rack Bookshelf Woodworking Plan. Reading Rack Bookshelf Woodworking Plan. WOOD®Store Keep your reading materials, whether books or magazines, in order with this convertible case. You can hang one on a wall, set one on a desk, or stack several of them on the base as a beautiful all-in-... 31_MD_00398 31-MD-00398 9.95 WoodworkersWorkshop
Location
Home / Indoor Furniture and Misc / Bookcases Woodworking Plans for Projects / Reading Rack Bookshelf Woodworking Plan.

Reading Rack Bookshelf Woodworking Plan.

31-MD-00398 - Reading Rack Bookshelf Woodworking Plan.
Keep your reading materials, whether books or magazines, in order with this convertible case. You can hang one on a wall, set one on a desk, or stack several of them on the base as a beautiful all-in-one bookcase and magazine rack like this one. The shelves sit flat to display books or angle forward for magazines.

Finished Dimensions
Width: 36 inches (91.4 cm)
Depth: 11.75 inches (29.8 cm)

Plan Author: James Downing

Published Date: 1999

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed: We used walnut, and walnut plywood, but you can use wood of your choice.

Tools needed: Table saw, drill, drill press, pocket hole jig, router and other common workshop tools

Your Total:

31-MD-00398 - Reading Rack Bookshelf Woodworking Plan. Selection

31-MD-00398PAPER - Reading Rack Bookshelf Woodworking Plan. - Paper plan
USD 12.95 | 12 Points | In Stock
31-MD-00398PDF - Reading Rack Bookshelf Woodworking Plan. - PDF plan
USD 9.95 | 9 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Bookshelf Clamp Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Cut it out from scrap plywood you probably have in your workshop and sell for a buck at craft shows. A basic 1 page instruction on how to make one with full size drawings. Beginner s...

From USD 2.95
1 Point | In Stock
Simple Book Caddy Woodworking Pattern

This is a very simple, but useful project that shows one of our favourite assembly techniques - False Dowel Construction. It resembles the old-fashioned dowel construction, but the thin slice of dowel...

From USD 2.95
1 Point | In Stock
Hen Book Stand Woodcraft Sign Pattern Downloadable

Most plaques may be made into Book Stands by gluing a plaque to each end of a 1/2 or 3/4 inch thick x 5-1/2 inch wide piece of board. The length may be as small as 6 or 8 inches or as long as 24 inche...

From USD 2.95
1 Point | In Stock
Whale Tail Bookshelf Downloadable Woodcrafting Pattern

Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. Most plaque shapes can be made into slanted book shelfs, just like our whale of a tale book shelf. Beginner skill level...

From USD 2.95
1 Point | In Stock
Boat Shelf Woodworking Plan - medium.

Boat shelf projects are available in three sizes, each sold separately. Projects are made from pine beaded board, 1/4 inch plywood and some 3/4 inch stock. Pattern for oars is included with the large boat plan...

USD 21.95
21 Points | In Stock
Book Stack Rack Woodworking Plan.

Keeps your childrens story books, coloring books, CDs or DVDs organized. Each section stacks on top of another. You can make one, two or three sections (pictured) as your collection grows.

USD 11.99
11 Points | In Stock
Boat Shelf Woodworking Plan

Looking for the perfect home accent to match your seafaring tastes? How about our novel boat shelf? Designed by Jim Shotwell, an accomplished boatbuilder and woodworker from Nescopeck, Pennsylvania, ...

From USD 9.95
9 Points | In Stock
Chefs Cookbook Bookshelf Woodworking Plan

Add spice to your kitchen countertop with this adjustable cookbook holder. And for a special effect, scrollsaw and glue on a wheat-motif onlay. We will show you how.

From USD 5.95
5 Points | In Stock
Reading Rack Bookshelf Woodworking Plan.

Keep your reading materials, whether books or magazines, in order with this convertible case. You can hang one on a wall, set one on a desk, or stack several of them on the base as a beautiful all-in-...

From USD 9.95
9 Points | In Stock
Solid Oak Bookcase Woodworking Plan

You do not need a dream shop to build this handsome project; a few basic power tools will do. And one-stop shopping at your favorite home center gets you rolling right away. You would pay a lot for a...

From USD 7.95
7 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2020 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2020 Kryptronic, Inc. Exec Time: 0.121905 Seconds Memory Usage: 2.925598 Megabytes
Kryptronic