Carve a Classic Shell Woodworking Plan Carve a Classic Shell Woodworking Plan WOOD®Store The seashell has long been a popular design for carved furniture ornamentation. Now you can fashion shell-shaped ornaments or drawer pulls, thanks to this simple approach from woodcarver ... 31_MD_00381 31-MD-00381 5.95 WoodworkersWorkshop
Location

Carve a Classic Shell Woodworking Plan

31-MD-00381 - Carve a Classic Shell Woodworking Plan
The seashell has long been a popular design for carved furniture ornamentation. Now you can fashion shell-shaped ornaments or drawer pulls, thanks to this simple approach from woodcarver Keith Randich of Rochester, New York. A full size pattern of the shell is included, but you can resize the pattern depending on the size shell you wish to make.

Plan Author: Keith Randich

Published Date: 2000

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed: Carve the shell from stock that matches the grain and color of the furniture it will be mounted on.

Tools needed: Bandsaw, and common carving tools

Your Total:

31-MD-00381 - Carve a Classic Shell Woodworking Plan Selection

31-MD-00381PAPER - Carve a Classic Shell Woodworking Plan - Paper plan
USD 8.95 | 8 Points | In Stock
31-MD-00381PDF - Carve a Classic Shell Woodworking Plan - PDF plan
USD 5.95 | 5 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Router Carved Signs Woodworking Plans

Making carved wooden signs can be both an enjoyable and profitable past time. This packet contains all the information necessary to get you started. Do not be afraid to experiment at any stage of the ...

From USD 6.95
5 Points | In Stock
Basswood Bluegill Woodworking Plan

Take the bait and carve the basswood bluegill. More and more carvers seem to like fish these days. Not necessarily on the dinner table but as carving subjects. Try your hand at this realistic bluegill...

From USD 7.95
7 Points | In Stock
Shoreline Sojourner Woodworking Plan

A high styled shorebird for you to carve. As soon as we saw the shorebird sculptures from Virginian Bob Swain, we knew you would want to try making one. Here is how Bob goes about carving and painting...

From USD 7.95
7 Points | In Stock
Chip Carved Serving Board Woodworking Plan

We designed this serving board as a project that even first-time chip carvers can successfully complete. We eliminated the tedious geometric cuts of some chip-carving designs, and replaced them with e...

From USD 7.95
7 Points | In Stock
Olden Days Duck Decoy Woodworking Plan

While judging woodcarvings at the Iowa State Fair a few years ago, we were taken with an antique-style decoy like the canvasback shown at left. Later, we contacted he carver, Clint Bingham of Chariton...

From USD 7.95
7 Points | In Stock
Carve a Classic Shell Woodworking Plan

The seashell has long been a popular design for carved furniture ornamentation. Now you can fashion shell-shaped ornaments or drawer pulls, thanks to this simple approach from woodcarver ...

From USD 5.95
5 Points | In Stock
Torx Replacement Screws for Arbortech Woodcarver Blade

These replacement screws are for the Arbortech™ Industrail Woodcarver blade #63-IND-FG-100. The package contains three of M3 Torx™ screws. The screws are high quality grade 12.9 Torx™ 9 head. This acc...

USD 39.95 USD 29.96 (Save 25%)
39 Points | 2 In Stock
Industrial Woodcarver Blade for Arbortech Tools

Fits most 4 inch (100mm) and 4.5 inch (115mm) angle grinders. Suitable for carving, cutting, shaping, trenching and trimming wood. Highly recommended to be used with the Arbortech™ Pro-Guard #63-ACC-F...

USD 159.95 USD 119.96 (Save 25%)
159 Points | 2 In Stock
Industrial Woodcarver Pro-Kit Arbortech Tool Accessory

Fits most 4 inch (110 mm) and 4.5 inch (115 mm) angle grinders. Featuring the 3 carbide teeth blade (see #63-IND-FG-100) and Pro-Guard kit (see #63-ACC-FG-100). Turn your angle grinder into a fully fu...

USD 164.85
164 Points | 1 In Stock
Mini Carver Blades 2 pk Arbortech Tool Accessory

These mini carver blades can be used with the Arbortech™ product line of power carving woodworking tools. The 2 inch diameter (50 mm) round blades feature a 3/8 inch (10 mm) depth of cut, made with ...

USD 24.95 USD 18.71 (Save 25%)
24 Points | Out Of Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2020 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2020 Kryptronic, Inc. Exec Time: 0.12426 Seconds Memory Usage: 2.877121 Megabytes
Kryptronic