Three Tiered Pastry Stand Woodworking Plan Three Tiered Pastry Stand Woodworking Plan WOOD®Store Use this three-tiered pastry stand, sometimes called a dumb waiter, to serve fresh pies or display colorful houseplants. To make the tiers, we fashioned three plates using a router and templates. Also... 31_MD_00373 31-MD-00373 5.95 WoodworkersWorkshop
Location
Home / Scrollsaw Patterns / Shelfs and Fretwork Scrollsaw Patterns / Three Tiered Pastry Stand Woodworking Plan

Three Tiered Pastry Stand Woodworking Plan

31-MD-00373 - Three Tiered Pastry Stand Woodworking Plan
Use this three-tiered pastry stand, sometimes called a dumb waiter, to serve fresh pies or display colorful houseplants. To make the tiers, we fashioned three plates using a router and templates. Also, we have included a drilling and sanding jig which comes in handy while making this pastry stand. The three trays, which make up the stand, measure 10-1/8, 11-1/16, and 12-1/16 inches in diameter.

Plan Contributors: Jan Svec, Chuck Hedlund

Published Date: 2000

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed: We used maple and a hardwood ball, but you can use a wood of your choice.

Tools needed: Drill press, disc sander, drum sander, scroll saw, router, planer, and other common workshop tools

Your Total:

31-MD-00373 - Three Tiered Pastry Stand Woodworking Plan Selection

31-MD-00373PAPER - Three Tiered Pastry Stand Woodworking Plan - Paper plan
USD 8.95 | 8 Points | In Stock
31-MD-00373PDF - Three Tiered Pastry Stand Woodworking Plan - PDF plan
USD 5.95 | 5 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 3.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 7.95 | In Stock
About
Copyright Statement

You Might Also Like...

Christmas Ornaments Woodworking Plan

Christmas Ornament woodworking plans - Several styles to turn or cut from flat stock. Assorted sizes and styles. Traditional shapes and a few new styles. Among the assortment is a replica of the classic...

USD 17.95 USD 8.98 (Save 50%)
17 Points | 3 In Stock
A Treasure Trove of Tiny Turnings Woodworking Plan

Hey turners, are you looking for something neat to do with all those wood scraps too beautiful to toss, yet seemingly too small to serve any purpose? Faced with the same dilemma, I blew the dust off o...

6 Points | 6 In Stock
Decorative Turned Birdhouses Woodworking Plan

Even if they do not attract any tenants, you can take pleasure in the fine lines of these miniatures. Intended for their good looks and not for actual nesting, these turned projects will add a bit of ...

From USD 7.95
7 Points | In Stock
Pepper Mill and Salt Shaker Woodworking Plan

Just as salt and freshly ground pepper accent food, our turned pepper mill and salt shaker will enhance your table setting. The Pepper mill measures 5.5 inches high x 2.5 inches in diameter, and the...

USD 8.95 USD 4.48 (Save 50%)
8 Points | 2 In Stock
Segmented Lathe Bowl Woodworking Plan

We have long admired Ray Allens stunning segmented bowls. So we asked the Yuma, Arizona, turner to show us (and you) how to make one. While watching Ray build a segmented bowl blank, we quickly uncove...

From USD 9.95
9 Points | In Stock
Turned Table Lamp Woodworking Plan

This lamps graceful curves and pleasing proportions make it the perfect project to hone your turning skills. To guarantee your success, you will need a four-jaw chuck and a simple homemade centering...

USD 10.95 USD 5.48 (Save 50%)
10 Points | 2 In Stock
Portable Mini Lathe Base Woodworking Plan

The two roomy drawers in this easy-to-build benchtop base keep your mini lathes centers and other accessories close at hand. When you are done with your turning session, just grab hold of the convenience...

USD 8.95 USD 4.48 (Save 50%)
8 Points | 2 In Stock
Turned Candleholders Woodworking Plan

These tulip shaped candle holders make a great gift. Armed with a degree in woodworking and furniture design from Indiana University of Pennsylvania, Mark Burhans headed for the lathe to put his...

8 Points | 3 In Stock
Turned Salt and Pepper Shakers Woodworking Plan.

Add some spice to mealtimes with this pleasing plump turned shaker set. All you need is a lathe, a couple of bits, and basic turning skills to form these attractive dining accessories in a dash ...

From USD 7.95
7 Points | In Stock
Domed Snack Set Woodworking Plan

Serve cheese and crackers on this terrific turned tray. A maple cheeseboard graces the center of this domed mahogany tray, making an ideal service for all kinds of snacks. A knife with a turned birds ...

10 Points | 1 In Stock
Free Plans and Resources

We have been compiling the most comprehensive directory of internet woodworking information since 1998.

Our daily updates include new pre-approved, hand-selected DIY project resources. We do a lot of effort to ensure that our database only includes safe, correct woodworking designs for hobby crafters and woodworkers.

Visit Resources & Free Plans

Banner Adverts
4 Board Table Top Reindeer Scrollsaw Project
Mary Joseph Baby Jesus and Sheep Nativity Yard Art Woodworking Pattern.
Grinch Christmas Gifts in the Bag! Yard Art Woodworking Pattern
Nativity Scene - Angel Yard Art Project
Santa Camo-Claus Kneeling Yard Art Woodworking Plan
Nutcracker 8 ft tall Yard Art Woodworking Pattern
Santa Claus and Rudolph Yard Art Woodworking Pattern
Sasquatch Family Yard Art Woodworking Pattern
Santa Claus with Camouflage Kneeling Yard Art Woodworking Plan
RCMP Memorial Ribbon Yard Art
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2024 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. Exec Time: 0.049642 Seconds Memory Usage: 1.622063 Megabytes
Kryptronic