Angle Bevel Woodworking Plan Angle Bevel Woodworking Plan WOOD®Store Here is a quality tool that offers accuracy plus the beauty of walnut and brass. It also makes a great gift. 31_MD_00246 31-MD-00246 2.95 WoodworkersWorkshop
Location
Home / Workbenches & Jigs / Angle Bevel Woodworking Plan

Angle Bevel Woodworking Plan

31-MD-00246 - Angle Bevel Woodworking Plan
Here is a quality tool that offers accuracy plus the beauty of walnut and brass. It also makes a great gift.

Finished Dimensions
Width: 8 inches (20 cm)

Wood and Supplies needed:
We used walnut but you can use a wood of your choice.

Tools needed:
Tablesaw, planer, table mounted router, clamps, bandsaw, drum sander, and common hand tools.

Your Total:

31-MD-00246 - Angle Bevel Woodworking Plan Selection

31-MD-00246PAPER - Angle Bevel Woodworking Plan - Paper plan
USD 5.95 | 5 Points | 2 In Stock
31-MD-00246PDF - Angle Bevel Woodworking Plan - PDF plan
USD 2.95 | 2 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Masterful Marking Gauge Woodworking Plan

Instead of fooling around with makeshift measuring and marking methods, count on this accurate, heirloom-quality gauge for layout help. Use it now, and eventually you can pass it on with pride.

From USD 2.95
2 Points | In Stock
Fine Finish Scraper Woodworking Plan

Our comfortable, good-looking tool is easy to build, and its adjustable blade makes getting into tight corners a snap.

From USD 2.95
2 Points | In Stock
Super Strip Sander Woodworking Plan

This heirloom-quality walnut and maple strip sander is the perfect tool for detail work, like cleaning cabinet joinery. It lets you sand right up to an edge or corner, and leaves the smoothest surface...

From USD 2.95
2 Points | In Stock
Scratch Awl Woodworking Plan

Whenever a project calls for accurate layout lines and precisely marked measurements, lots of experienced woodworkers put away the pencil and reach for a scratch awl. Somehow, you just feel more like ...

From USD 2.95
2 Points | In Stock
Angle Bevel Woodworking Plan

Here is a quality tool that offers accuracy plus the beauty of walnut and brass. It also makes a great gift.

From USD 2.95
2 Points | In Stock
Center Finder Woodworking Plan.

For this walnut-and-brass center finder we wanted the tool to look distinctive, feel comfortable, and be small enough to fit in a shop apron. This tool meets our criteria, and it is terrific for location...

From USD 2.95
2 Points | In Stock
Depth Gauge Woodworking Plan

You are not likely to misplace this shop heirloom. Use if for measuring dadoes, mortises, and other recesses where precision is critical.

From USD 2.95
2 Points | In Stock
Torpedo Level Woodworking Plan

Although small in size and made from a single piece of wood, this level made me reach deep into my bag of woodworking tricks to come up with precise solutions to make this work as a must have tool...

From USD 2.95
2 Points | In Stock
Turned Mallet Woodworking Plan

After a simple glue-up and a quick turn between centers, you will have one strikingly beautiful tool in no time. And, with is supple ash handle and super-dense morado (Bolivian rosewood) head, you can...

From USD 5.95
5 Points | In Stock
Marking Gauge Woodworking Plan

With both single and paired marking points, this great-looking hand tool helps you lay out rabbets, tenons, and mortises with hairline precision. Even with the availability of pencils, craftsmen still...

From USD 2.95
2 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2020 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2020 Kryptronic, Inc. Exec Time: 0.136449 Seconds Memory Usage: 2.967545 Megabytes
Kryptronic