Magazine Rack Woodworking Plan Magazine Rack Woodworking Plan WOOD®Store Looking for a project to test your skills in joinery? This magazine rack features a center-lap joint that not only crosses at an oblique angle, but is tapered to boot! It begs to be cut by hand, and ... 31_MD_00236 31-MD-00236 5.95 WoodworkersWorkshop

Magazine Rack Woodworking Plan

31-MD-00236 - Magazine Rack Woodworking Plan
Looking for a project to test your skills in joinery? This magazine rack features a center-lap joint that not only crosses at an oblique angle, but is tapered to boot! It begs to be cut by hand, and we will show you how.

Finished Dimensions
Height: 11 inches (27.9 cm)

Plan Author: Jay Taylor

Plan Contributors: Marlen Kemmet, Roxanne LeMoine, Kim Downing, Jamie Downing, Bill Zaun

Published Date: 2002

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed: We used oak, but you can use a wood of your choice. A full cutting diagram and materials list is included with the plan.
1 of 3/4 x 3-1/2 x 96 inch oak lumber
1 of 1/2 x 5-1/2 x 72 inch oak lumber
1 of 1/2 x 7-1/4 x 36 inch oak lumber

Tools needed: Table saw, band saw, belt sander, drill, router and other common workshop tools.

Your Total:

31-MD-00236 - Magazine Rack Woodworking Plan Selection

31-MD-00236PAPER - Magazine Rack Woodworking Plan - Paper plan
USD 8.95 | 8 Points | In Stock
31-MD-00236PDF - Magazine Rack Woodworking Plan - PDF plan
USD 5.95 | 5 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Basic Magazine Table Downloadable Scrollsaw Woodcrafting Pattern

A basic build table that can make use of scrap wood boards or recycled pallet pieces.

From USD 2.95
1 Point | In Stock
Colonial Magazine Rack Downloadable Scrollsaw Woodcrafting Pattern

This project does require an angle cut, some curve cutting of the decorative scrolls and some fairly accurate drilling.

From USD 2.95
1 Point | In Stock
Wall Mount Rack Downloadable Scrollsaw Woodcrafting Pattern

This attractive country style basket rack could be mounted to any flat surface or make two and place them back to back of each other. An excellent tool tote in the garden too. This project does require...

From USD 2.95
1 Point | In Stock
Pallet Slat Tote Rack Downloadable Scrollsaw Woodcrafting Pattern

This is a nice design that may be made with good workmanship and a nice finish for personal use or bang them out with glue, finish nails and a coat of stain for inexpensive products to sell.

From USD 2.95
1 Point | In Stock
Wall Mount Rack Downloadable Scrollsaw Woodcrafting Pattern

We really enjoy this simple design because it may be made shorter or longer, narrower or wider without taking up any more floor space.. Formerly called Wall Magazine Rack.

From USD 2.95
1 Point | In Stock
Intarsia Masterpeace Angel Woodworking Plan

With a little scrollsawing, some simple contour sanding, and our easy-to-follow instructions, you can transform a few scraps of wood into this heavenly wall hanging by renowned artist Judy Gale Robert...

From USD 9.95
9 Points | In Stock
Maximize Your Wood By Resawing Woodworking Article

We show you how to resaw boards into thinner slabs using a bandsaw. We point out five good reasons to resaw your own lumber. We show you all the tips to tightly tune your bandsaw, including setting up...

From USD 3.25
3 Points | In Stock
Shaker Mirror Woodworking Plan

Talk about luck! When I was researching the article on furniture maker Thomas Moser for the August 1998 issue, I casually mentioned to him that we are always looking for great project designs. To my s...

From USD 7.95
7 Points | In Stock
Patina Topped Jewelry Box Woodworking Plan

This unique jewelry box features a striking copper lid with a patina pattern that you can easily duplicate with our instructions. The removable tray and system of interior dividers multiply the storage...

From USD 7.95
7 Points | In Stock
Adaptive Display Cabinet Woodworking Plan

Is there one wall cabinet that meets all needs? If so, you may be looking at it. We designed this one with a cove top, halogen lights, and towel bar so it fits right into a kitchen or bathroom. But, l...

From USD 9.95
9 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2020 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2020 Kryptronic, Inc. Exec Time: 0.149734 Seconds Memory Usage: 2.970901 Megabytes
Kryptronic