Shaker Style Cupboard Woodworking Plan Shaker Style Cupboard Woodworking Plan WOOD®Store This cupboard consists of two basic assemblies, the base cabinet and the upper case. And though we tell you how to build each separately, you may want to glue up the panels for both units at the same... 31_MD_00201 31-MD-00201 14.95 WoodworkersWorkshop

Shaker Style Cupboard Woodworking Plan

31-MD-00201 - Shaker Style Cupboard Woodworking Plan
This cupboard consists of two basic assemblies, the base cabinet and the upper case. And though we tell you how to build each separately, you may want to glue up the panels for both units at the same time. By doing it this way, you will have less downtime ,the panels will be ready for machining when you are. Note also that the ends, shelves, and top of both the base cabinet and upper case are made up for width in the same way, which simplifies construction greatly.

Finished Dimensions
Height: 78 inches (195 cm)
Width: 37 inches (92.5 cm)
Depth: 18.5 inches (46.25 cm)

Wood and Supplies needed:
We used maple but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Tablesaw, router, clamps, drill, and common hand tools.

Your Total:

31-MD-00201 - Shaker Style Cupboard Woodworking Plan Selection

31-MD-00201PAPER - Shaker Style Cupboard Woodworking Plan - Paper plan
USD 17.95 | 17 Points | 1 In Stock
31-MD-00201PDF - Shaker Style Cupboard Woodworking Plan - PDF plan
USD 14.95 | 14 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

StepBack Cupboard Woodworking Plan

This charming cupboard gets the step-back name from the fact that its upper section is shallower than the base.

USD 12.99
12 Points | 2 In Stock
Pie Safe Cabinet Woodworking Plan.

Long before iceboxes became a common household item, frugal homemakers everywhere stored their bread and pastries in a pie safe. The decorative punched-tin panels allowed ventilation while protecting ...

USD 19.99
19 Points | In Stock
Country Cupboard Woodworking Plan

This project looks terrific sitting atop the buffet or alone hanging on a wall. Buffet plan sold separately is Plan No. 31-MD-00004. If you want a whole roomful of this style of furniture...

From USD 7.95
7 Points | In Stock
Country Cabinet Woodworking Plan.

This plan is also available as a downloadable PDF. Constructed with edge-joined pine and crowned with traditional dentil molding, this handsome cabinet can hold all sorts of things.

From USD 9.95
9 Points | In Stock
Shaker Style Cupboard Woodworking Plan

This cupboard consists of two basic assemblies, the base cabinet and the upper case. And though we tell you how to build each separately, you may want to glue up the panels for both units at the same...

From USD 14.95
14 Points | In Stock
Sliding Door Cupboard Woodworking Plan

Divided glass panes and traditional moldings give these stacked cabinets a stately look, while wide sides create deep, ample display room. You can make two cabinets and stack them, or build just one ...

From USD 14.95
14 Points | In Stock
Country Classic Chimney Cupboard Woodworking Plan.

Suitable in any room or a hall, this tall slender unit with adjustable shelves and a drawer occupies very little precious floor space. Whether you need storage for kitchen items, linens, or clothing, ...

From USD 9.95
9 Points | In Stock
Pierced Tin Pie Safe Cabinet Vintage Woodworking Plan.

Pie safes with pierced tin door panels were used as a means of protecting pies and meats from insects during the nineteenth century. This is a vintage project plan.

USD 10.95
10 Points | In Stock
Corner Cupboard Cabinet Vintage Woodworking Plan

Chances are you have an unused corner just waiting for this charming cabinet. Traceable full-size patterns for curves, a material list and complete assembly instructions. This is a vintage project plan.

USD 10.95
10 Points | In Stock
American Woodworker Issue 22 October 1991 Recycled Woodworking Magazine

This early issue of American Woodworker magazine, even though a few decades old, still holds premium content for woodworking projects and articles on workshop techniques that are relevant in todays wo...

USD 7.95
7 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2018 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2018 Kryptronic, Inc. Exec Time: 0.104476 Seconds Memory Usage: 6.831345 Megabytes
Kryptronic