Dovetail Jig Stabilizing Fence Woodworking Plan Dovetail Jig Stabilizing Fence Woodworking Plan WOOD®Store Most jigs rely on a small cam to position the board, but do not provide enough support along the length of the board to prevent racking. Without proper alignment, the dovetails vary slightly in length... 31_MD_00183 31-MD-00183 2.95 WoodworkersWorkshop
Location
Home / Workbenches & Jigs / Dovetail Jig Stabilizing Fence Woodworking Plan

Dovetail Jig Stabilizing Fence Woodworking Plan

31-MD-00183 - Dovetail Jig Stabilizing Fence Woodworking Plan
Most jigs rely on a small cam to position the board, but do not provide enough support along the length of the board to prevent racking. Without proper alignment, the dovetails vary slightly in length, resulting in a poor fit. Our dovetail jig fence provides support on both horizontal and vertical planes. And, the fence bars adjust so you can fine-tune them to match your jig setup. We built this fence for a Porter-Cable model 5008 Dovetail Templet, but you can adapt the fence to fit your particular jig.

Wood and Supplies needed:
We used plywood but you can use a wood of your choice.

Tools needed:
Table saw, drill, clamps.

Your Total:

31-MD-00183 - Dovetail Jig Stabilizing Fence Woodworking Plan Selection

31-MD-00183PAPER - Dovetail Jig Stabilizing Fence Woodworking Plan - Paper plan
USD 5.95 | 5 Points | 4 In Stock
31-MD-00183PDF - Dovetail Jig Stabilizing Fence Woodworking Plan - PDF plan
USD 2.95 | 2 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Dovetail Jig Stabilizing Fence Woodworking Plan

Most jigs rely on a small cam to position the board, but do not provide enough support along the length of the board to prevent racking. Without proper alignment, the dovetails vary slightly in length...

From USD 2.95
2 Points | In Stock
Pocket Hole Routing Jig Woodworking Plan

A simple, no non-sense design. Given how specialized the tools are for pocket-hole joinery, some woodworkers have balked at using the technique for projects. Nowadays, the dedicated jigs for drilling ...

From USD 2.95
2 Points | In Stock
Right On Dadoe Jig Woodworking Plan.

Do not grieve over sloppy router-cut dadoes. Instead, gear up for accuracy with this easy-to-make-and-use scrap wood problem solver.

From USD 5.95
5 Points | In Stock
Fail Safe Router Jig Woodworking Plan

This router jig is a specialist at through or stopped dadoes and grooves. Included is an exploded diagram.

From USD 2.95
2 Points | In Stock
Router Table Fence Woodworking Plan

This full-featured fence and a team of accessories make an unbeatable workshop combination. To add flexibility, the fence is designed to attach to a router table in just about every imaginable way. Af...

From USD 9.95
9 Points | In Stock
3 Must Have Router Jig Woodworking Plan

For this special issue on routers, we asked a trio of seasoned router experts to share shop-made jigs they have found super handy over the years. We will provide the plans for each, and also show how ...

From USD 5.95
5 Points | In Stock
Easy Adjust Router Trammel Woodworking Plan

Say goodbye to rough and irregular edges the next time you cut a circle or ring. And, using the extended base of the trammel for added stability, as shown at right, you can detail an edge or rabbet th...

From USD 2.95
2 Points | In Stock
Fluting Jig Woodworking Plan

Mount your router to this simple-to-build jig, and guide it arrow-straight down the workpiece to rout flutes with dead-on precision.

From USD 2.95
2 Points | In Stock
Self Centering Mortising Jig Woodworking Plan

Here is a quick-and-easy Self Centering Mortising jig that can be used on stock of various thicknesses and will always self-center.

From USD 2.95
2 Points | In Stock
Extra Width Dado Jig Woodworking Plan

Here is a jig for routing bookcase or cabinet-side dadoes that exactly match the thickness of your shelf stock. No special bits are needed. Just use an ordinary straight bit and a guide bushing.

From USD 2.95
2 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2018 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2018 Kryptronic, Inc. Exec Time: 0.112434 Seconds Memory Usage: 6.935616 Megabytes
Kryptronic