Portable Mini Lathe Base Woodworking Plan Portable Mini Lathe Base Woodworking Plan WOOD®Store The two roomy drawers in this easy-to-build benchtop base keep your mini lathes centers and other accessories close at hand. When you are done with your turning session, just grab hold of the convenience... 31_MD_00180 31-MD-00180 5.95 WoodworkersWorkshop
Location
Home / Workbenches & Jigs / Portable Mini Lathe Base Woodworking Plan

Portable Mini Lathe Base Woodworking Plan

31-MD-00180 - Portable Mini Lathe Base Woodworking Plan
The two roomy drawers in this easy-to-build benchtop base keep your mini lathes centers and other accessories close at hand. When you are done with your turning session, just grab hold of the convenient handle slot and put the entire unit away until next time.

Finished Dimensions
Height: 4 inches (10 cm)
Width: 26 inches (65 cm)
Depth: 9 inches (22.5 cm)

Wood and Supplies needed:
We used birch or cabinet grade plywood but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Table saw, drill, router, band saw or scrollsaw.

Your Total:

31-MD-00180 - Portable Mini Lathe Base Woodworking Plan Selection

31-MD-00180PAPER - Portable Mini Lathe Base Woodworking Plan - Paper plan
USD 8.95 | 8 Points | 2 In Stock
31-MD-00180PDF - Portable Mini Lathe Base Woodworking Plan - PDF plan
USD 5.95 | 5 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Christmas Ornaments Woodworking Plan

Christmas Ornament woodworking plans - Several styles to turn or cut from flat stock. Assorted sizes and styles. Traditional shapes and a few new styles. Among the assortment is a replica of the classic...

USD 17.95
17 Points | 6 In Stock
Wood Turner Scroll Saw Pattern Downloadable

This pattern can be used to produce a clock for the wall of desk. The plus symbol is where you would place the clock face. Cut out one of these for your favorite wood turner or lather.

From USD 6.95
6 Points | In Stock
A Treasure Trove of Tiny Turnings Woodworking Plan

Hey turners, are you looking for something neat to do with all those wood scraps too beautiful to toss, yet seemingly too small to serve any purpose? Faced with the same dilemma, I blew the dust off o...

USD 6.95
6 Points | 6 In Stock
Decorative Turned Birdhouses Woodworking Plan

Even if they do not attract any tenants, you can take pleasure in the fine lines of these miniatures. Intended for their good looks and not for actual nesting, these turned projects will add a bit of ...

From USD 7.95
7 Points | In Stock
Pepper Mill and Salt Shaker Woodworking Plan

Just as salt and freshly ground pepper accent food, our turned pepper mill and salt shaker will enhance your table setting. The Pepper mill measures 5.5 inches high x 2.5 inches in diameter, and the...

From USD 5.95
5 Points | In Stock
Segmented Lathe Bowl Woodworking Plan

We have long admired Ray Allens stunning segmented bowls. So we asked the Yuma, Arizona, turner to show us (and you) how to make one. While watching Ray build a segmented bowl blank, we quickly uncove...

From USD 9.95
9 Points | In Stock
Turned Table Lamp Woodworking Plan

This lamps graceful curves and pleasing proportions make it the perfect project to hone your turning skills. To guarantee your success, you will need a four-jaw chuck and a simple homemade centering...

From USD 7.95
7 Points | In Stock
Portable Mini Lathe Base Woodworking Plan

The two roomy drawers in this easy-to-build benchtop base keep your mini lathes centers and other accessories close at hand. When you are done with your turning session, just grab hold of the convenience...

From USD 5.95
5 Points | In Stock
Turned Candleholders Woodworking Plan

These tulip shaped candle holders make a great gift. Armed with a degree in woodworking and furniture design from Indiana University of Pennsylvania, Mark Burhans headed for the lathe to put his...

From USD 5.95
5 Points | In Stock
Turned Salt and Pepper Shakers Woodworking Plan.

Add some spice to mealtimes with this pleasing plump turned shaker set. All you need is a lathe, a couple of bits, and basic turning skills to form these attractive dining accessories in a dash ...

From USD 7.95
7 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2018 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2018 Kryptronic, Inc. Exec Time: 0.106057 Seconds Memory Usage: 6.890999 Megabytes
Kryptronic