Super Simple Taper Jig Woodworking Plan. Super Simple Taper Jig Woodworking Plan. WOOD®Store Taper jigs do not get much more basic than this hold-down taper jig. Build the plywood base and hardwood hold downs. Then, mark the angled cut line(s) on your workpiece. Position the rip fence so the ... 31_MD_00178 31-MD-00178 2.95 WoodworkersWorkshop
Location
Home / Workbenches & Jigs / Super Simple Taper Jig Woodworking Plan.

Super Simple Taper Jig Woodworking Plan.

31-MD-00178 - Super Simple Taper Jig Woodworking Plan.
Taper jigs do not get much more basic than this hold-down taper jig. Build the plywood base and hardwood hold downs. Then, mark the angled cut line(s) on your workpiece. Position the rip fence so the inside edge of the jig base is against the fence and the outside edge of the base is flush with the blade. Align the marked cut line on the workpiece with the outside edge of the jig next to the blade. Secure in place, and make the cut as shown in the photo. To simplify matters, we have added a Buying Guide for the hardware used on the jig. The base measures approximately 22 x6 inches.

Wood and Supplies needed:
We used plywood and hardwood for this project.

Tools needed:
Tablesaw

Your Total:

31-MD-00178 - Super Simple Taper Jig Woodworking Plan. Selection

31-MD-00178PAPER - Super Simple Taper Jig Woodworking Plan. - Paper plan
USD 5.95 | 5 Points | In Stock
31-MD-00178PDF - Super Simple Taper Jig Woodworking Plan. - PDF plan
USD 2.95 | 2 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Box Joint Jig Woodworking Plan.

Box joints offer both strength and unique good looks. Although not as refined as dovetail joints, they can be cut on a table saw or router table using a simple shop-built jig. Not only that, but you ...

From USD 2.95
2 Points | In Stock
Super Simple Taper Jig Woodworking Plan.

Taper jigs do not get much more basic than this hold-down taper jig. Build the plywood base and hardwood hold downs. Then, mark the angled cut line(s) on your workpiece. Position the rip fence so the ...

From USD 2.95
2 Points | In Stock
True Cut Taper Jig Woodworking Plan.

Ripping table legs or other project pieces at an angle can be frustrating and even dangerous work. However, with our taper jig, you will be able to quickly set the precise angle and safely cut leg aft...

From USD 2.95
2 Points | In Stock
Tablesaw Seven Pack Woodworking Plans.

This seven pack of plans will help you get the most use out of your tablesaw. First is the Precision Miter Stop which you can make in minutes and use as a lifetime addition to your shop. Next is the...

From USD 9.95
9 Points | In Stock
Straight Tracking Crosscut Sled Woodworking Plan

For cutting long or wide stock on your tablesaw, this simple jig is like having another pair of hands. With a long, wide base securely anchored to a 20 inch long miter gauge slot guide bar, this cross...

From USD 2.95
2 Points | In Stock
4 Task Tackling Tablesaw Jigs Woodworking Plan

There are numerous jigs and upgrade devices available for tablesaws. Many seem overly complex to build or too expensive to buy. But the tablesaw jigs shown here, designed by Zane Powel of Indianapolis...

From USD 7.95
7 Points | In Stock
Super Simple Tapering Jig Woodworking Plan

Tapers turn bulky, blocky stumps into svelte and sexy legs. Start cutting the fat with a trip to the scrap bin.

From USD 2.95
2 Points | In Stock
Zero Clearance Cross Cut Sled Woodworking Plan

The most useful tool in our shop is the tablesaw. Here is a simple-to-build jig that makes cutting chip-free crosscuts a breeze.

From USD 2.95
2 Points | In Stock
Mighty Miter Sled Woodworking Plan

Setting up for perfect miter cuts can be time consuming. With a miter sled, you do it only once.

From USD 2.95
2 Points | In Stock
Tablesaw Joinery Jig Woodworking Plan

Tight-fitting joints are a snap on any saw when using this sturdy but adjustable jig. Use it to cut tenons, half-laps, and bridle joints.

From USD 2.95
2 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2018 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2018 Kryptronic, Inc. Exec Time: 0.105882 Seconds Memory Usage: 6.941063 Megabytes
Kryptronic