Mitersaw Stand Woodworking Plan Mitersaw Stand Woodworking Plan WOOD®Store We built this sturdy mitersaw stand 24 inches deep to accommodate a 12 inch compound mitersaw. If you have a 10 inch saw, you can make the stand as shallow as 18 inches. Be sure to measure your saw... 31_MD_00142 31-MD-00142 9.95 WoodworkersWorkshop
Location
Home / Workbenches & Jigs / Mitersaw Stand Woodworking Plan

Mitersaw Stand Woodworking Plan

31-MD-00142 - Mitersaw Stand Woodworking Plan
We built this sturdy mitersaw stand 24 inches deep to accommodate a 12 inch compound mitersaw. If you have a 10 inch saw, you can make the stand as shallow as 18 inches. Be sure to measure your saw before you start construction. Also, allow space to pivot and bevel the saw blade-motor assembly, room to adjust the bevel angle, and space for dust-collection fittings. For accurate and consistent cuts when trimming pieces to length, add the bonus fence stop plan included with this plan.

Wood and Supplies needed:
We used medium density fiberboard (MDF) and maple but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Table saw, router, drill, clamps, common hand tools.

Your Total:

31-MD-00142 - Mitersaw Stand Woodworking Plan Selection

31-MD-00142PAPER - Mitersaw Stand Woodworking Plan - Paper plan
USD 12.95 | 12 Points | 2 In Stock
31-MD-00142PDF - Mitersaw Stand Woodworking Plan - PDF plan
USD 9.95 | 9 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Mobile Mitersaw Center Woodworking Plan.

Finally, the ultimate mitersaw center has arrived. This sturdy plywood unit rolls around and locks in place where needed. Fold-down table extensions let you manage long pieces for crosscutting. And th...

From USD 9.95
9 Points | In Stock
Mitersaw Stand Woodworking Plan

We built this sturdy mitersaw stand 24 inches deep to accommodate a 12 inch compound mitersaw. If you have a 10 inch saw, you can make the stand as shallow as 18 inches. Be sure to measure your saw...

From USD 9.95
9 Points | In Stock
Four Dust Collector Woodworking Plans

Clear the air in your workshop with these easy-to-make projects. The less dust floating around in your workshop, the better. Not only does your shop stay cleaner, but, more importantly, your lungs...

From USD 9.95
9 Points | In Stock
On The Mark Mitersaw Station Woodworking Plan.

Whether you need to rough-cut a board to length or make a precise compound cut in a workpiece, this work station, coupled with your 10 or 12 inch mitersaw, will ensure great results. Large tables ...

From USD 7.95
7 Points | In Stock
Space Saving Extension Tables Woodworking Plan

Outfit your mitersaw or mortiser with easy-to-build extensions that provide workpiece support and feature a sliding stop. The tool platform and extensions easily adapt to any mitersaw or mortiser. If ...

From USD 7.95
7 Points | In Stock
Expandable Mitersaw Platform Woodworking Plan

Couple your mitersaw to this easy-to-build, affordable project and increase your tools cutting capacity, accuracy, and safety, guaranteed! Overall dimensions 48 inches wide (121 inches wide fully exte...

From USD 5.95
5 Points | In Stock
On The Wall Mitersaw Station Woodworking Plan

This wall-hugging Mitersaw Station not only preserves floor space, being just 24 inches deep, it also contains the blast of sawdust from a notoriously messy tool.

From USD 2.95
2 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2020 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2020 Kryptronic, Inc. Exec Time: 0.113848 Seconds Memory Usage: 2.769547 Megabytes
Kryptronic