Segmented Lathe Bowl Woodworking Plan Segmented Lathe Bowl Woodworking Plan WOOD®Store We have long admired Ray Allens stunning segmented bowls. So we asked the Yuma, Arizona, turner to show us (and you) how to make one. While watching Ray build a segmented bowl blank, we quickly uncove... 31_MD_00113 31-MD-00113 9.95 WoodworkersWorkshop

Segmented Lathe Bowl Woodworking Plan

31-MD-00113 - Segmented Lathe Bowl Woodworking Plan
We have long admired Ray Allens stunning segmented bowls. So we asked the Yuma, Arizona, turner to show us (and you) how to make one. While watching Ray build a segmented bowl blank, we quickly uncovered the secret to his success-painstaking precision. Whether he is constructing a 6 inch bowl like this one or one of his larger pieces, Ray makes sure every segment fits perfectly. Here are the steps to follow; the precision is up to you.

Wood and Supplies needed:
We used curly maple, imbuya, maple veneer, and black veneer, but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Table saw, band saw, planer, lathe, clamps, and common woodturning tools.

Your Total:

31-MD-00113 - Segmented Lathe Bowl Woodworking Plan Selection

31-MD-00113PAPER - Segmented Lathe Bowl Woodworking Plan - Paper plan
USD 12.95 | 12 Points | In Stock
31-MD-00113PDF - Segmented Lathe Bowl Woodworking Plan - PDF plan
USD 9.95 | 9 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Segmented Lathe Bowl Woodworking Plan

We have long admired Ray Allens stunning segmented bowls. So we asked the Yuma, Arizona, turner to show us (and you) how to make one. While watching Ray build a segmented bowl blank, we quickly uncove...

From USD 9.95
9 Points | In Stock
Compote Woodworking Plan

You would be hard-pressed to find a more elegant bowl for serving fruit or candy. And this one offers some sweet bonuses, too: It is quick, easy, and fun to turn. Serve nuts, candy, or other tasty tre...

From USD 5.95
5 Points | In Stock
Salad Bowls Woodworking Plan

Whether you are turning several 6 inch salad bowls for everyday use, as demonstrated here, or a unique highly figured bowl that is strictly for display, you will find this method guarantees success.

From USD 5.95
5 Points | In Stock
Square Edged Bowl Woodworking Plan

With square corners and a wavy rim, this bowl will have admirers thinking you are a woodturning wizard, and for good reason. Only you will know that adding some waste material when gluing up the blank...

From USD 7.95
7 Points | In Stock
Three Piece Bowl Set Woodworking Plan

The broad, sweeping curves of these bowls allow plenty of room to see what you are doing as you turn, making this an ideal project for even beginners.

From USD 5.95
5 Points | In Stock
Turn a Green Bowl Woodworking Plan

With just a few basic tools and these easy-to-follow steps, you will be turning out dazzling bowls in no time. To help you along the way, we have included 34 how-to images of this bowl from start to f...

From USD 5.95
5 Points | In Stock
Mini Lathe Magic Book

With clear, concise instructions and 345 detailed photos, Ron Hampton takes the reader through every step required to turn and finish wooden works of art on the mini-lathe. Eight separate projects are...

USD 14.95
14 Points | In Stock
Turning Bowls

Follow along as world-renowned woodturner Dick Sing leads you through all the steps needed to create beautiful, awe-inspiring bowls. Using clear, step-by-step instructions and over 300 photographs, Dick describes...

USD 14.95
14 Points | In Stock
The Basics of Turning Spirals

Bill Bowers illustrates and explains the processes of turning spirals from A to Z. Richly illustrated and explained in simple terms, he gives the novice as well as the expert all necessary information...

USD 14.95
14 Points | In Stock
7 Great Turning Projects for the Smaller Lathe

Seven great projects for the 12 to 36 inch lathe, designed for beginning to intermediate turners, presented in a fully illustrated step-by-step fashion. Included are instructions for turning two scoop...

USD 14.95
14 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2018 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2018 Kryptronic, Inc. Exec Time: 0.108315 Seconds Memory Usage: 6.847244 Megabytes
Kryptronic