Table Saw Dust Collector Construction Plan Table Saw Dust Collector Construction Plan WOOD®Store This table saw dust-collector hood is effective as well as convenient. The big window lets you see your cut at all times, and neither the hood nor its support will impede your sawing. Included is a bo... 31_MD_00097 31-MD-00097 7.95 WoodworkersWorkshop
Location
Home / Workbenches & Jigs / Table Saw Dust Collector Construction Plan

Table Saw Dust Collector Construction Plan

31-MD-00097 - Table Saw Dust Collector Construction Plan
This table saw dust-collector hood is effective as well as convenient. The big window lets you see your cut at all times, and neither the hood nor its support will impede your sawing. Included is a bonus table saw hold-downs plan.

Wood and Supplies needed:
We used birch plywood, laminated birch and birch but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Table saw, band saw, drill, drill press, router, clamps, and common hand tools.

Your Total:

31-MD-00097 - Table Saw Dust Collector Construction Plan Selection

31-MD-00097PAPER - Table Saw Dust Collector Construction Plan - Paper plan
USD 10.95 | 10 Points | 2 In Stock
31-MD-00097PDF - Table Saw Dust Collector Construction Plan - PDF plan
USD 7.95 | 7 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

3 in 1 Tablesaw Upgrade and Saw Top Dust Collector Woodworking Plan Set.

Attention all tablesaw owners! Now is your chance to make some big improvements in your equipment for just a few dollars. By investing as few as a couple of evenings, you can enclose the base, add an ...

From USD 9.95
9 Points | In Stock
Cyclone Dust Collector Construction Plan

In designing and outfitting WOOD Magazines Idea Shop 3 basement shop with a cyclone dust collector, we had several objectives in mind. We wanted a space-efficient unit with minimal noise, dust-free...

From USD 14.95
14 Points | In Stock
Table Saw Dust Collector Construction Plan

This table saw dust-collector hood is effective as well as convenient. The big window lets you see your cut at all times, and neither the hood nor its support will impede your sawing. Included is a bo...

From USD 7.95
7 Points | In Stock
Four Dust Collector Woodworking Plans

Clear the air in your workshop with these easy-to-make projects. The less dust floating around in your workshop, the better. Not only does your shop stay cleaner, but, more importantly, your lungs...

From USD 9.95
9 Points | In Stock
Tablesaw Sanding Table Woodworking Plan

A built-in dust chute links it directly to your shop vacuum or dust collector. We designed this sanding table to fit a 10 inch Jet Contractors Saw. You will probably have to alter the tables size to...

From USD 5.95
5 Points | In Stock
Dual Purpose Dust Chute Woodworking Plan

Clamp it to your workbench or drill press and you have the perfect cleaner-upper. Or, set it on the floor and sweep in the debris for easy pick up.

From USD 2.95
2 Points | In Stock
Drill Press Dust Collector Woodworking Plan

Airborne debris does not stand a chance with this device. Wood chips and sawdust will not stay around long when you hook up this clamp-down collector to your shop vacuum or dust collection system.

From USD 2.95
2 Points | In Stock
Drill Press Drum Sanding Table Woodworking Plan

This handy table helps you in three important ways. First, it has a dust-collection port for capturing fine dust before it becomes airborne. The table also accepts inserts that you size to tightly fit...

From USD 2.95
2 Points | In Stock
Router-Table Dust Hood Woodworking Plan

When you are template or freehand routing, a fence-mounted dust port does no good. So for those situations, Todd DiOrio of Pennsylvania designed this dust hood. Todd says, It can be mounted anywhere o...

From USD 2.95
2 Points | In Stock
Dust Collecting Tool Stand Woodworking Plan.

You only need to run a flex hose from a 4 inch side port to the tool creating all that dust, whether its on the stand itself or if its already set up somewhere in your shop. A debris separator, effect...

From USD 14.95
14 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2018 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2018 Kryptronic, Inc. Exec Time: 0.104914 Seconds Memory Usage: 6.940834 Megabytes
Kryptronic