Tablesaw Outfeed Table Woodworking Plan Tablesaw Outfeed Table Woodworking Plan WOOD®Store Our handy folding fixture adds only inches to your saw when stored, but provides you with more than 3 feet of stock support beyond the blade for safer and more convenient cutting. This fixture attache... 31_MD_00086 31-MD-00086 7.95 WoodworkersWorkshop
Location
Home / Workbenches & Jigs / Tablesaw Outfeed Table Woodworking Plan

Tablesaw Outfeed Table Woodworking Plan

31-MD-00086 - Tablesaw Outfeed Table Woodworking Plan
Our handy folding fixture adds only inches to your saw when stored, but provides you with more than 3 feet of stock support beyond the blade for safer and more convenient cutting. This fixture attaches to any stationary tablesaw, regardless of the style or material of your saws extension wings. We built ours to fit a Ridgid TS2424 tablesaw with webbed, cast-iron extension wings. But we will also show you how to mount the outfeed table to solid cast-iron, stamped-steel, and shop-built wooden tables.

Finished Dimensions
Width: 24 inches (60 cm)
Depth: 36 inches (90 cm)

Wood and Supplies needed:
We used solid stock and plywood but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Table saw, drill, clamps, router, and common hand tools.

Your Total:

31-MD-00086 - Tablesaw Outfeed Table Woodworking Plan Selection

31-MD-00086PAPER - Tablesaw Outfeed Table Woodworking Plan - Paper plan
USD 10.95 | 10 Points | 2 In Stock
31-MD-00086PDF - Tablesaw Outfeed Table Woodworking Plan - PDF plan
USD 7.95 | 7 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

3 in 1 Tablesaw Upgrade and Saw Top Dust Collector Woodworking Plan Set.

Attention all tablesaw owners! Now is your chance to make some big improvements in your equipment for just a few dollars. By investing as few as a couple of evenings, you can enclose the base, add an ...

From USD 9.95
9 Points | In Stock
Mobile Tablesaw Base Woodworking Plan

Downloadable plan available. It is sad but true that the space beneath most tablesaws goes to waste. But that need not be the case, as you can see here. Our cabinet stores a plentiful supply of sawblades, router bits, and other w...

From USD 9.95
9 Points | In Stock
Tablesaw Outfeed Table Woodworking Plan

Our handy folding fixture adds only inches to your saw when stored, but provides you with more than 3 feet of stock support beyond the blade for safer and more convenient cutting. This fixture attache...

From USD 7.95
7 Points | In Stock
Tablesaw Accessories Cabinet Woodworking Plan

Savvy storage within easy reach. Extension tables for tablesaws make woodworking easier, but they sure eat up a lot of precious floor space. This handsome roll-away cabinet helps you put that valuable...

From USD 9.95
9 Points | In Stock
Four Dust Collector Woodworking Plans

Clear the air in your workshop with these easy-to-make projects. The less dust floating around in your workshop, the better. Not only does your shop stay cleaner, but, more importantly, your lungs...

From USD 9.95
9 Points | In Stock
Box Joint Jig Woodworking Plan.

Box joints offer both strength and unique good looks. Although not as refined as dovetail joints, they can be cut on a table saw or router table using a simple shop-built jig. Not only that, but you ...

From USD 2.95
2 Points | In Stock
Super Simple Taper Jig Woodworking Plan.

Taper jigs do not get much more basic than this hold-down taper jig. Build the plywood base and hardwood hold downs. Then, mark the angled cut line(s) on your workpiece. Position the rip fence so the ...

From USD 2.95
2 Points | In Stock
Tablesaw Sanding Table Woodworking Plan

A built-in dust chute links it directly to your shop vacuum or dust collector. We designed this sanding table to fit a 10 inch Jet Contractors Saw. You will probably have to alter the tables size to...

From USD 5.95
5 Points | In Stock
True Cut Taper Jig Woodworking Plan.

Ripping table legs or other project pieces at an angle can be frustrating and even dangerous work. However, with our taper jig, you will be able to quickly set the precise angle and safely cut leg aft...

From USD 2.95
2 Points | In Stock
Mobile Sawing and Routing Center Woodworking Plan.

Increase the capacity of your tablesaw and router by combining them in one accommodating twin-cabinet design. The advantages include a larger tabletop, ample onboard accessory storage, and dedicated...

From USD 14.95
14 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2018 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2018 Kryptronic, Inc. Exec Time: 0.111056 Seconds Memory Usage: 6.942627 Megabytes
Kryptronic