Tilt Top Router Table Woodworking Plan Tilt Top Router Table Woodworking Plan WOOD®Store An open-and-close shop tool designed with you in mind. Count the features of this fully loaded router table, and you will quickly conclude that you have to have one. For starters, the table flips up f... 31_MD_00064 31-MD-00064 9.95 WoodworkersWorkshop
Location
Home / Workbenches & Jigs / Tilt Top Router Table Woodworking Plan

Tilt Top Router Table Woodworking Plan

31-MD-00064 - Tilt Top Router Table Woodworking Plan
An open-and-close shop tool designed with you in mind. Count the features of this fully loaded router table, and you will quickly conclude that you have to have one. For starters, the table flips up for easy changing of bits and checking bit height. It is topped by an accurate, easy-to-build fence. A sealed compartment underneath, fitted with a vacuum port, takes care of sawdust. Below that, you will find a slide-out shelf for storing all kinds of bits and accessories. Plus, we offer an optional table design for use with an aftermarket fence.

Finished Dimensions
Height: 35 inches (87.5 cm)
Depth: 19 inches (47.5 cm)

Wood and Supplies needed:
We used MDF, maple or birch, but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Table saw, drill, clamps, router, and common hand tools.

Your Total:

31-MD-00064 - Tilt Top Router Table Woodworking Plan Selection

31-MD-00064PAPER - Tilt Top Router Table Woodworking Plan - Paper plan
USD 12.95 | 12 Points | 4 In Stock
31-MD-00064PDF - Tilt Top Router Table Woodworking Plan - PDF plan
USD 9.95 | 12 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

You Might Also Like...

Router Bit Storage Cabinet Woodworking Plan

Using inexpensive MDF, hardboard and pine material, you can create a cabinet that offers great storage for router bits, bushings, wrenches, safety gear and anything else you use with your router. The ...

USD 9.99
9 Points | 3 In Stock
Lift Up Router and Benchtop Tool Table Woodworking Plan Part 2.

We showed you how to make the end cabinets and the sturdy laminated top for the workbench, in Part 1, the Full-Service Workbench, 31-MD-00058 sold separately. Now, with the basics out of the way, lets...

From USD 9.95
9 Points | In Stock
Tilt Top Router Table Woodworking Plan

An open-and-close shop tool designed with you in mind. Count the features of this fully loaded router table, and you will quickly conclude that you have to have one. For starters, the table flips up f...

From USD 9.95
12 Points | In Stock
Benchtop Router Table Woodworking Plan

This project is a must in your shop and you can put it together in a weekend for less than $100 plus the cost of your own wood. Its fence adjusts in a flash and locks into T-slotted mini-tracks with t...

From USD 9.95
9 Points | In Stock
Dovetail Jig Stabilizing Fence Woodworking Plan

Most jigs rely on a small cam to position the board, but do not provide enough support along the length of the board to prevent racking. Without proper alignment, the dovetails vary slightly in length...

From USD 2.95
2 Points | In Stock
Pocket Hole Routing Jig Woodworking Plan

A simple, no non-sense design. Given how specialized the tools are for pocket-hole joinery, some woodworkers have balked at using the technique for projects. Nowadays, the dedicated jigs for drilling ...

From USD 2.95
2 Points | In Stock
Right On Dadoe Jig Woodworking Plan.

Do not grieve over sloppy router-cut dadoes. Instead, gear up for accuracy with this easy-to-make-and-use scrap wood problem solver.

From USD 5.95
5 Points | In Stock
Fail Safe Router Jig Woodworking Plan

This router jig is a specialist at through or stopped dadoes and grooves. Included is an exploded diagram.

From USD 2.95
2 Points | In Stock
Mobile Sawing and Routing Center Woodworking Plan.

Increase the capacity of your tablesaw and router by combining them in one accommodating twin-cabinet design. The advantages include a larger tabletop, ample onboard accessory storage, and dedicated...

From USD 14.95
14 Points | In Stock
All Purpose Router Station Woodworking Plan

In its horizontal configuration, this router table is great for mortise and tenon work. A crank makes vertical adjustment convenient and accurate. For operations requiring traditional vertical orient...

From USD 9.95
9 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2018 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2018 Kryptronic, Inc. Exec Time: 0.108288 Seconds Memory Usage: 6.920212 Megabytes
Kryptronic