Vintage Tabletop Sleigh Woodworking Plan Vintage Tabletop Sleigh Woodworking Plan WOOD®Store It is amazing what woodworking treasures you can turn up by exploring historic homes around the country. Take this charming project, for example. It hails from Wyck, the Haines house in the historic G... 31_MD_00034 31-MD-00034 4.0 1 7.95 WoodworkersWorkshop
Location

Vintage Tabletop Sleigh Woodworking Plan

31-MD-00034 - Vintage Tabletop Sleigh Woodworking Plan
It is amazing what woodworking treasures you can turn up by exploring historic homes around the country. Take this charming project, for example. It hails from Wyck, the Haines house in the historic Germantown district in north Philadelphia. Thanks to The Wyck Association, we now can offer this pleasing reproduction to you to add nostalgia and charm to your holiday decorating.

Finished Dimensions
Width: 13 inches (32.5 cm)

Wood and Supplies needed:
We used cherry but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Bandsaw, drill, clamps, scroll saw, router, and common hand tools.

Your Total:

31-MD-00034 - Vintage Tabletop Sleigh Woodworking Plan Selection

31-MD-00034PAPER - Vintage Tabletop Sleigh Woodworking Plan - Paper plan
USD 10.95 | 10 Points | In Stock
31-MD-00034PDF - Vintage Tabletop Sleigh Woodworking Plan - PDF plan
USD 7.95 | 7 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 2.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 5.95 | In Stock
About
Copyright Statement

Reviews and Ratings

Overall
Quality
Value

tabletop sleigh

Bought this plan and made it for a Christmas gift. Thanks.

Submitted by: John on 01/18/2016 08:24:58 PM

You Might Also Like...

New England Lighthouse Woodworking Plan

New England Lighthouse Birdhouse woodworking plans - Can be built without birdhouse features. The New England Lighthouse birdhouse is one in a series of four distinctive houses representing ...

USD 17.95
17 Points | In Stock
Two Table Top Marble Devises Woodworking Plan Set.

Zig-zag model is the Largest at (left) 25 inches high x 17 1/2 inches wide x 12 inches deep. Arched top model (right) 20 inches high x 10 1/2 inches wide x 7 inches deep. The marble game on the left is a basic double raceway, zigzag device. It has a handy ...

USD 17.95
17 Points | In Stock
Sled Centerpiece Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. Festive tables always seem to be over flowing with decorations, gifts, food and everything else. Why not use a seasonal...

From USD 2.95
2 Points | In Stock
Tabletop Rocking Horse Downloadable Scrollsaw Woodcrafting Pattern

Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. You will be surprised at how many of these rocking horses you can make in a relatively short amount of time. Leave them...

From USD 2.95
2 Points | In Stock
4 Board Table Top Reindeer Woodworking Pattern Downloadable

Standing 15 inches tall, this cute reindeer can be easily made in 20 minutes with a few scrap pieces of lumber. I made this one by literally pulling a couple pine boards that were destined for the fir...

From USD 2.95
2 Points | In Stock
St. Bernard and Sled Woodworking Plan.

Need holiday decorating ideas? Here comes our St. Bernard and his sled to the rescue!

USD 14.99
14 Points | In Stock
Tabletop Shepherd and Sheep Woodworking Plan.

These groupings are similar to the large projects but are smaller - from 7-1/2 to 23 inches high. Use as a table center piece or for display on a shelf or fireplace mantle using your own tapered candles.

USD 14.99
19 Points | In Stock
Ox Cart Woodworking Plan

An old-fashioned ox cart to decorate your mantle or tabletop. Fill the cart with candy or nuts. All patterns drawn FULL size. Base measurements below.

USD 14.99
14 Points | In Stock
Donkey Cart Woodworking Plan.

This humble Donkey Cart can be used as a tabletop or mantle decoration for the holidays.

USD 14.99
14 Points | In Stock
Vintage Tabletop Sleigh Woodworking Plan

It is amazing what woodworking treasures you can turn up by exploring historic homes around the country. Take this charming project, for example. It hails from Wyck, the Haines house in the historic G...

From USD 7.95
7 Points | In Stock
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2020 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2020 Kryptronic, Inc. Exec Time: 0.126001 Seconds Memory Usage: 2.841049 Megabytes
Kryptronic