Height: 48.5 inches (123.2 cm)
Width: 34.3 inches (87.1 cm)
Length: 53.7 inches (136.4 cm)
Plan Author: WoodworkersWorkshop®
Plan Publisher: WoodchuckCanuck.com, Inc.
Published Date: 2015
Plan Language: English
Wood and/or Supplies needed:
1 pc 2 x 6 x 120 inch pressure treated lumber
1 pc 1 x 6 x 120 inch pressure treated lumber
4 pc 1 x 6 x 96 inch pressure treated lumber
1 pc 3/4 x 24 x 36 inch plywood
20 pc 3 inch wood screws
4 pc 2-1/2 inch wood screws
36 pc 2 inch wood screws
40 pc 1-1/2 inch wood screws
Tracing Paper 14-CARB2 is recommended.
If you plan to add the rocker blades you will need:
1 pc 1 x 8 x 76 inch pressure treated lumber
4 pc 3 inch wood screws
2 pc 1/4 x 3-1/2 inch carriage bolt, washer, lock washer and nut
2 pc 1/4 x 4-3/4 inch carriage bolt, washer, lock washer and nut
Tools needed: Table saw, jig saw and other common workshop tools
Woodworking patterns designed and produced by WoodworkersWorkshop®. This is a paper plan set printed on wide format paper to accommodate the full scale drawings. Simply open up the pattern, trace the parts in place and get busy cutting your plywood! If you have custom size requirements, please contact us. Where given, all measurements are in inches.
© 2015 WoodworkersWorkshop®. All rights reserved. The purchaser of this pattern is hereby granted a limited license to make no more than five (5) copies of this pattern for personal use or to sell at craft shows. The written consent of WoodchuckCanuck.com, Inc. is required to build, copy or sell more than five (5) copies of this pattern or to make more than five (5) finished parts any section of this pattern. Any further copying or other use of this pattern, in whole or in part, such as making kits from pre-cut templates, mass production or commercial usage, or any other unauthorized use, is strictly prohibited. Please see the “Copyright & Store Policies Page”.
Create your own maritime lantern! You can probably make this with scrap wood you have in your workshop. Use the glass or not, you could even use mirror on two sides to enhance the lighting produced by...
Have fun building one of our themed sun chairs. We designed our dolphin chair for the porpoise that you can ease back and relax with a smile on your face. Make the tail stool as a slant for relaxation. Or build it ...
Kick back and relax east coast style, with our Maritimes East Coast Fish Chair. Leave the chair all natural wood grain, or have some fun and paint it up like we show here. Even change the colors to sh...
We are very proud to offer our West Coast Fish Chair inspired by Haida art. And if you want, you can also convert it a rocker. Stool plan is also included. We provide everything you need in full size ...
Spend a little bit of time building one of our Maritime chairs and the work will pay dividends for years to come in the form of relaxation. Build the stool with the slant top so you can stretch your l...
We have taken our Maritime Adirondack Chair and made it half as wide again and used thicker material for the structure, making it a comfortable 36 inch wide seat. We include the stool (which can use ...
Why not settle back and take-r-easy in our deck lounge chair. The stool is separate and the legs fold up for storage. Build and finish it a number of ways. Use regular deck screws and deck boards, the...
Our Maritime Side-by-Each chairs is a fun play on words for these traditional side-by-side Adirondack style chairs. Our full size drawings and instructions show you how ...
Back in the day before glider brackets allowed for back and forth gliding motion, builder used eyebolts and chains. Our design is old-school. Rather than pay for expensive glider brackets and shipping...
Have fun building one of our clearly Canadian Maple Leaf chairs. With plenty of elbow room, we designed it for Canucks and Snowbirds. Make the classic red and white chair or get your hockey fix by...