Height: 22 inches (55.9 cm)
Width: 13.5 inches (34.3 cm)
Plan Author: WoodworkersWorkshop
Plan Publisher: WoodchuckCanuck.com, Inc.
Published Date: 2013
Plan Language: English, all measurements are in inches.
Wood and/or Supplies needed:
1 - 24 x 36 inch plywood, 1/4 inch or thicker
1 - 1 x 2 x 24 inch long wood stake
Tools needed: Jigsaw, scrollsaw and other common workshop tools
Woodworking patterns designed and produced by WoodworkersWorkshop®.
© 2013 WoodworkersWorkshop®. All rights reserved. The purchaser of this pattern is hereby granted a limited license to make no more than five (5) copies of this pattern for personal use or to sell at craft shows. The written consent of WoodchuckCanuck.com, Inc. is required to build, copy or sell more than five (5) copies of this pattern or to make more than five (5) finished parts any section of this pattern. Any further copying or other use of this pattern, in whole or in part, such as making kits from pre-cut templates, mass production or commercial usage, or any other unauthorized use, is strictly prohibited. Please see the “Copyright & Store Policies Page”.
We offer a color print for this woodworking project. It prints on self adhesive vinyl, simply peel and stick to the flat surface (plywood, plastic panel, glass or wall). Order the color print to save on painting time. Color prints are custom printed for your order, therefore are NOT REFUNDABLE. The self adhesive is very tacky. The plan offers some tips on application. We will not be held responsible for any damage to the color print or the surfaces should you decide to pull off the vinyl to reposition or remove it. The inks used are weather proof and are rated for exposure to UV rays. Used in seasonal displays the colors should last you for years of use.
This is one of the most universal of moving wood devices. A large number of versions have been made, but this may be the only plan for building one. Three different figures are shown as examples. A ha...
Everybody loves the Labrador Retriever! Instructions: Black represents the wood, the white is the scrap waste. Print the pattern as is, or enlarge or reduce for your requirements.
This yard art figure is sized for a width of 36 inches. Simply print to your printer using standard paper, piece the template together and start cutting. If you wish the pattern to be resized or if ...
Pit Bulls are fun loving animals and very family friendly. Create the Pit Bull to stand all by itself with no hat, and then through the year, simply create each of the hats and have your Pit Bull cele...
Our Sitting Bulldog is a favorite among dog lovers! We also offer resizing if you want the patterns smaller or larger. Easy to make, simply trace the lines onto plywood (or wall) with tracing paper (c...
Dalmatians are fun loving animals and very family friendly. Create the Dalmatian to stand all by itself with no hat, and then through the year, simply create each of the hats and have your Dalmatian c...
This scroll saw pattern includes two patterns; one is a line art pattern shown on the left and the other is an adaptation of the line art drawing (shown on the right). The line art drawing has quite a...
This scroll saw intarsia pattern art drawing has quite a bit of detail, so you can decide to do as little or as much as you want to. Three drawings included; a full color drawing, the main line art dr...
Beware of dog! Well, maybe... this cartoon-like dog might be difficult to take seriously. Have fun with your mean dog. Just trace, cut and paint.
One sheet of plywood is all you need to make this near life size deer ( 54 inches high x 95 inches long ) and coon hound dog (18 inches high x 60.5 inches long).