This step by step diy project is about how to build a tv stand. Building a tv stand is a complex project, but anyone can get the job done by using professional plans and quality materials. Don’t forget that you should adjust the dimensions of the stand to your tastes and add a few finishing touches, as to match the style of the rest of the furniture. Adding the doors to the table will add an exquisite look to your project, but it requires complex skills.
When building a wooden stand for your tv you should know there are many designs you could choose from. Therefore, take a look over several projects and adjust the design of the table before starting the actual construction. You might want to add several extra shelves or not to build the door for the small table. Irrespective of your choice, we recommend you to plan everything form the very beginning.
It is essential to select the lumber with attention when building the tv stand, especially if you want to get a professional result. Therefore, choose perfectly straight boards and look for any flaws, such as knots or cracks. In addition, buy high quality lumber (such as pine), if yo want to get a nice finish and to build a tv stand that will last for many years in a row. Fill all the cavities with putty and sand the surface with medium and fine grit sandpaper. See all my Premium Plans in the Shop.
Made from this plan
Building a tv stand
Building a tv stand
Materials
- A – 4 pieces of 2×2 lumber – 4” long LEGS
- B – 2 pieces of 1×20 lumber – 19 3/4″ long SIDES
- C – 1 piece of 1×20 lumber – 47 1/4″ long, 2 pieces – 45 3/4″ long FRAME
- D – 1 piece of 1/4″ plywood – 20 1/2” x 47 1/4″ long BACK
- E – 4 pieces of 1×2 lumber – 23 1/2″ long, 4 pieces – 17 3/4″ long DOORS
- E – 2 pieces of 1/4″ glass – 18 1/4″x21″ long DOORS PANELS
- 1 piece of 2×2 lumber – 2 ft
- 2 pieces of 1×20 lumber – 8 ft
- 1 piece of 1/4″ plywood – 2’x4′
- 2 pieces of 1×2 lumber – 8 ft
- 1 piece of 1/4″ glass – 2’x4′
- 2 1/2″ screws
- 1 1/4″ screws
- glue, stain
- wood filler
- hinges
Tools
- Safety gloves, glasses, Miter saw, jigsaw
- Chalk line, tape measure, spirit level, carpentry pencil
- Drill machinery and drill bits
Tips
- Apply several coats of wood stain to the wooden components
- Fill the holes with wood filler and smooth the surface
Time
- One Day
Related
How to build a tv stand
Building the frame of the tv stand
The first step of the project is to build the frame of the tv stand. As you can see in the image, we recommend you to build the components from 1×20 lumber and to lock them together with pocket screws. Drill the pocket holes at both ends of the side components and insert 1 1/4″ screws. Alternatively, drill regular pilot holes through the horizontal components and insert the screws into the sides.
Attaching the shelf
The next step of the project is to install the shelves inside the frame. In order to get the job done in a professional manner, we recommend you to use 1×18 lumber. Drill pocket holes at both ends of the board and lock it to the side walls with 1 1/4″ galvanized screws. Adjust the height at which you place the shelf to suit your needs. Align the shelf to the back edges of the frame.
Attaching the plywood back
Continue the woodworking project by attaching the back of the tv stand. Therefore, use 1/4″ plywood to build the back of the wall and attach it to the frame with 5/8″ finishing nails. Check if the corners are square and add glue to the joints. Align the edges with great care before inserting the brad nails.
Installing the wooden legs
In order to enhance the look of the tv stand, we recommend you to build four legs from 2×2 or 3×3 lumber and to attach them to the frame, using the information from the plans. Drill pocket holes through the legs and secure them to the bottom of the TV stand using 1 1/4″ screws.
Building the doors
One of the last steps is to build the doors for the tv stand. Build the frames from 1×2 lumber and lock them together with pocket screws. Drill pocket holes at both ends of the vertical components and insert 1 1/4″ screws into the perpendicular components.
Fitting the door glass
Make sure the corners are right-angled before installing the glass into place. Use clips to secure the glass to the frames.
Building the doors
Attach the doors into place and lock them to the frame with metal hinges. Install door knobs that match the style of your furniture.
DIY TV stand
The TV stand seen from the front. This project features a modern design, so it can match the style of any living room.
How to build a tv stand
Last but not least, you need to take care of the finishing touches. Therefore, fill the holes with wood putty and let it dry out for several hours. Smooth the surface with medium-grit sandpaper and clean the surface with a dry cloth.
Thank you for reading our project about how to build a tv stand and we recommend you to check out the rest of the projects. Don’t forget to share our projects with your friends, by using the social media widgets.
