Wooden Construction Toys

Woodworkers with a passion for making wooden construction toys will love these chunky model toys.

Designed and built to last, these wooden toys make the perfect "made with love" gift for children.

Make this delightful toy grader with this free plan, complete with step by step instructions, diagrams and photos.

There is just enough detail to stimulate the imagination of children and adults alike.

Tools

This construction toy can be made with just a few tools. 

  • A cordless drill is a tool that I use most often and as a bonus, it also useful for driving screws for carpentry work.
  • A tenon saw also known as a back saw. Shorter than a hand saw.
  • A combination square very useful for measuring and marking. I use mine all the time.
  • Any number of woodworking clamps. You can never have enough.
  • Hacksaw to cut the dowel axles to length.
  • Wood file to round over all the edges.

You may also need the following items to complete the project:

  • Sanding block with 120 and 80 grit sandpaper.
  • A selection of drill bits.

A 12 inch disc sander or linisher with sanding disk attachment is very useful for trimming up end grain and squaring off small pieces of wood.

If you are going to make your own wheels for this wooden construction toy, a drill press is recommended. You will also need a 16mm spade bit, a 6mm drill bit and a circle cutter modified to cut wheels instead of holes. 

Materials

This wooden construction toy can be made with bits of wood left over from other projects.

I made mine from a piece of left over pine 19mm thick by 140mm wide by 500mm long. The wheels were also cut out of 19mm pine by 140mm wide.

For the six wheels, I used a piece less than 200mm in length, and the extra length was useful in clamping the piece while using the circle cutter.

The blade of the grader was made with a piece of skirting board 200mm long.

For the axles, use 6mm dowel.

Step by Step Instructions

  • Step 1. The first step is to read through the instructions and study the plans and photos.
  • Step 2. Using a soft pencil and a ruler, mark out the component parts as shown in the drawing.
  • Step 3. Cut out the parts using an electric jigsaw, a tenon saw or a scroll saw.
  • Step 4. Parts A to D are trimmed back to their proper sizes. A twelve inch disc sander is useful for trimming small pieces.
  • Step 5. Glue the pieces that make up parts E and F and put to one side to set.
  • Step 7. Clamp parts B together and drill the holes for the axles. At this stage, the holes are drilled for a snug fit. Do this in order to make sure things stay lined up when the parts are glued and clamped together.
  • Step 8. Dry clamp parts A and B together, keeping the two parts B aligned with the axle dowels. Mark the pieces so that it will be re-assembled in the correct order. It is shown in red in the photo only to highlight the idea, so don't actually mark it in red. Apply the glue, clamp it and put to one side.

    It is important that the axle dowels are left in place until the glue sets to minimize creep under clamping pressure. Once the glue has set, re-drill the holes to allow the axles to spin freely.

    Step 9. The blade of the grader, part C, is made from a piece of skirting board cut to a width of 30mm. It may also be made from a piece of timber that is 9mm thick, just chamfer one edge to the profile shown in the drawing. 

    Step 10. Cut and trim part D to size, and drill the axle hole using a drill press or drill guide. Use the 6.5mm drill bit to allow the axle to spin freely. 

    Step 11. Drill the holes for the roof of the cab by placing it on the body as shown in the photo. 

    Step 12. The photo shows how to fix the dowels in place by measuring the height the dowels are set so that they sit slightly above the roof. This is an idea borrowed from the Craftsman furniture movement.

    Final Assembly

    Glue the roof and engine block in place. Once the glue has set, lightly sand the whole toy with 220 grit sandpaper, removing all the sharp corners.

    Attach the wheels to the axles with a small dab of glue.

    Painting and Finishing

    Leave it in it's natural state, or apply your favourite finish. I used yellow food colouring for a bright yellow finish. To make the wheels black, I mixed all the food colours together.

    Download Wooden Construction Toys

    Free printable PDF to build this wooden toy road grader.

    More Wooden Construction Toys

    A road grader is for making roads. When you need to move a lot of earth, you need an earth mover. Like a bulldozer with a bucket.

    A road grader is for making roads. If you want to get serious about moving a lot of dirt, then you will need an earth mover. Like a bulldozer with a bucket.

    Follow this link to open the Sketchup model in your browser.

    You can click on the scenes tab to make a PDF copy of the parts with dimensions.

    Share your construction toy project.

    Do you enjoy making construction toys? Share your latest project here.

    More projects from all around the world

    Click below to see contributions from other visitors to this page...

    GrandpasToysAU on Etsy shop 
    Here is a photo I found at GrandpasToysAU on Etsy shopping site. You have to agree it's really well made, and with a toy truck and flat trailer. …

    Click here to write your own.

    Visit the woodworking projects gallery to view projects from people all around the world.

    How to turn your hobby into a profitable business.

    Solo Build It! (SBI!) is an online platform that empowers solopreneurs to build profitable online businesses. For over two decades, SBI! has been trusted by members to turn their passions, hobbies, or skills into successful ventures. Recently, the introduction of ChatGPT has ushered in a new era of AI-assisted content creation within SBI!.

    Allow me to introduce you to Tai, your business-building AI assistant. Tai is now available in SBI! and can help you navigate the world of online entrepreneurship. Whether you’re a complete beginner or an experienced solopreneur, SBI! provides everything you need to create an income-generating website or blog.

    Here are some reasons why starting an online business with SBI! and Tai is a great choice:

    1. Adaptable Lifestyle: Building an online business adapts to your desired lifestyle. Enjoy newfound freedom without being tied down to another job.
    2. Low Startup Costs: You don’t need significant capital to begin. All you require is a computer, internet access, a roadmap, and an affordable platform like SBI!.
    3. Flexibility: Work as much or as little as you want, wherever you choose. Once you’ve built a solid foundation, you can earn money even on days you don’t actively work.
    4. Portability: Take your business with you, especially if travel is part of your retirement dream.
    5. Global Impact: Help people worldwide by sharing your knowledge and expertise.
    6. Continuous Learning: Running an online business keeps your mind active and energized.

    SBI! combines education, tools, and a proven process to give you the highest chance of achieving your financial goals. Whether you’re aiming for financial independence or simply want a rewarding project during retirement, SBI! can guide you.

    If any of this resonates with you, I invite you to explore SBI! and discover how it can help you build your online retirement business. Even if you’re a beginner, SBI! provides the resources you need to succeed. Say hello to Tai and embark on your entrepreneurial journey! 🚀

    Learn more and try Tai for free on the Solo Build It! website.