Search Results

Sponsored Ad
Stand For Teachers Tablet

Build this stand for a teachers tablet using the free instructions available at the link. You can build two stands using just one board.

Link Type:
free plans
Link Source:
Instructables
Flying EAgle Woodworking Plan Set.

Similar to the Eagle Sentry, this new Flying Eagle is built from cheap lumber yard components. The majestic Eagle perched in your yard or on your balcony He's just landed, as seen by the extended wings. He has a commanding height of 38 inches and a wing span of 50 inches. It is intended to be put on a brief 4x4 post that is either fixed to your deck or stands alone in the yard. The project shown in this blueprint has full size part patterns.

Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Nativity Post People Woodworking Plan Set.

Use 3/4 inch lumber scraps and cheap landscaping ties to create the Nativity Post People. 33 to 37 inches is the height range for Nativity Post People. Every design includes illustrations for every figure in each group. Each pattern section is illustrated at full scale. Shown with optional Three Kings Post People.

Link Type:
fee plans
Link Source:
WoodworkersWorkshop
1925 Model T Stake Bed Antique Car Woodworking Plan

Woodworking blueprint for a 1925 Model A Ford automobile. Full-size patterns, close-up images, text, and illustrations. The Ford truck plan is intended for experienced to expert woodworkers. The plan includes full-size photographs of every component that can be copied on an 11 x 17-inch paper copier.

Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Scrap Wood Wall Art

Don't ever throw away scrap wood!! You already knew that though. You can use the wood from your scrap bin to make your own wooden wall art.

Link Type:
free plans
Link Source:
Instructables
Bubblegum Cow Woodworking Plan

When the tail of Bubbles the cow is raised, a gumball will drop into the bucket. The cow's stomach cavity can hold about 125 gumballs with a normal size of 9/16 inch in diameter. The gumballs are collected in the project's wooden milk bucket in the back. The project was built using 3/4 inch thick mahogany and 1/4 inch Baltic Birch plywood. Each section of the design is fully illustrated. 14.5 inches long, 8 inches wide, and 9-1/2 inches high are the measurements.

Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Post Chcikens Woodworking Set of Plans.

The rooster, the hen, and the chicks are carved from leftover pieces of 3/4- and 1-1/2-inch-thick hardwood and low-cost landscaping posts. When used with one of our other ideas for Post Farm Figures, this is a fantastic companion project. The height of the rooster is roughly 39 inches. Every pattern piece is drawn full scale.

Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Stacked Hexagon Flower Pot Holder

This stacked hexagon flower pot holder is easy to build and would work great either indoors or out. Follow along at the link to see how to build it.

Link Type:
free plans
Link Source:
mamaneedsaproject
Outdoor Chair

This outdoor chair was designed to fit a deep seat cushion. You know...the kind that makes you not want to get up. Easy to build when you follow the free woodworking plans available at the link.

Link Type:
free plans
Link Source:
AnaWhite
Penguin Post People Woodworking Plan Set - 3 plans included.

This group of penguins will bow politely and shrug their shoulders to welcome your guests. Simple to construct using 3/4-inch-thick timber and landscape posts with a 4 inch diameter. Projects range in height from 26 to 40 inches. All three penguins' full-size patterns are included in the plan.

Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Sponsored Ad

These beautiful floating shelves were built using plywood. Plywood!! It doesn't have to be expensive to be beautiful. Build a few floating shelves (with plywood) and the free woodworking instructions available at the link.

Link Type:
free plans
Link Source:
LoveCreateCelebrate
Kids Wall Bookshelves

These kids wall bookshelves come in handy when mounted to the wall lower than you normally would so children can reach and hopefully return books to the shelves. Easy to build and very useful, you can make your own using the free plans at the link.

Link Type:
free plans
Link Source:
BitterrootDiy
6ft Nutcracker Woodworking Plan.

In the German folk tale The Nutcracker and the Mouse King, the Nutcracker played a significant role. Tchaikovsky later wrote the music for the well-known ballet The Nutcracker. These days, a lot of people amass nutcrackers of all shapes and sizes. This 72-inch-tall item can be made using a piece of 2 x 12 lumber. It will not truly crack nuts but it will be a prized souvenir. Every pattern piece is depicted in its actual size.

Link Type:
fee plans
Link Source:
WoodworkersWorkshop
3ft Nutcracker Woodworking Plan.

One of our most well-liked Christmas activities turned out to be The Nutcracker. A smaller version was also requested by customers. Hence, it is now! A piece of 1 x 6 lumber was used to construct this 36-inch tall Nutcracker. Despite not really cracking nuts, it nevertheless forms a beautiful display. Full size parts drawings are included with this woodworking plan.

Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Shiplap Builtins Free Plans

Isn't this shiplap built-in unit beautiful!! This unit is 9 feet wide but using these plans you can make adjustments to suit your space. Follow along at the link to see how to build it.

Link Type:
free plans
Link Source:
HoneyBearLane
Shoe Rack

This handsome shoe rack measures 14 inches high, 12 inches deep and almost 24 inches long. Of course you can adjust the size to suit your space. Free plans include instructions to do wood bending and another if you'd rather not.

Link Type:
free plans
Link Source:
100Things2Do
Succulent Table Centerpiece

Here is a quick way to add charm to your kitchen or dining table. Build this succulent table centerpiece by following along at the link. It is an easy project you could complete and start enjoying in just an afternoon.

Link Type:
free plans
Link Source:
TheInspiredWorkshop
Garden Gate Woodworking Plan

Our Garden Gate is a one-of-a-kind addition to your home. "Welcome to my garden," the gate symbolises. There are no hinges since it does not open. The gorgeous butterfly can be made out of two pieces of 1 foot square plywood. The plan has been drawn in its entirety. It measures 36 inches tall by 30 inches wide.

Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Hexagon Planters

Dress up your houseplant pots by building hexagon planters. These can be customized to accommodate any pot size. These ones were built using cedar but you could use any wood and finishing type you choose.

Link Type:
free plans
Link Source:
CraftedByTheHunts
Geometric Mountain Wall Art

This geometric mountain wall art is awesome. Customizable too! Also...the whole thing was built using 1/2 inch thick plywood. Follow along at the link and get inspired to build your own wooden mountain wall art.

Link Type:
free plans
Link Source:
Instructables
Sponsored Ad
Two Level Shoe Rack

Do you end up with piles of shoes by the door? Most do...so if you are one of them, you need to build this handy two level shoe rack. It is easy to build and you can use what ever wood you have on hand. Read through the free woodworking instructions at the link.

Link Type:
free plans
Link Source:
Instructables
Lego Table With Storage

Anyone whose children play with lego will understand the need for a lego table with storage. Especially the storage part. Free plans at the link to build this project.

Link Type:
free plans
Link Source:
ByBrittanyGoldwyn
Butcherblock Side Table

Neat idea. Build a butcherblock side table using the free plans at the link. You can customize the size according to the materials you have on hand.

Link Type:
free plans
Link Source:
LoveCreateCelebrate
Captive Ring Baby Rattle

This captive ring baby rattle is a project for all you woodturners. You need a lathe to complete this project but just look at the end result. Follow along at the link to see how to do it.

Link Type:
free plans
Link Source:
Instructables
DIY Wood Stool

This cute diy wood stool would be perfect for the bathroom or any room really. Easy to build using the free woodworking plans with step-by-step instructions available when you click through the link.

Link Type:
free plans
Link Source:
CraftedByTheHunts
Wall spice Rack

Sleek and stylish, this wall spice rack is quick and easy to build and will keep your spices within reach of cooking. Check out the link and follow along to build your own.

Category:
Link Type:
free plans
Link Source:
H2OBungalow
Outdoor Bench

This outdoor bench seat is perfect for the patio and easy to build too. You can customize the size to suit your needs. Follow along at the link to see how to build it.

Link Type:
free plans
Link Source:
LoveCreateCelebrate
Revolving Coat and Tree Rack Woodworking Plan

This rack can hold coats, shoes, and even hats. The project swivels on a Lazy Susan bearing, allowing you convenient access from all sides. The top is adorned with a pineapple, which is a symbol of hospitality. There are four coat hooks that can be used. The shoe rack can hold up to eight pairs of shoes. Hats can be rested on pineapple leaves. The patterns are all drawn in full scale. With a 14-inch circumference, it stands 60 inches tall.

Link Type:
fee plans
Link Source:
WoodworkersWorkshop
Paper Roll Note Holder

This wall-mounted paper roll holder would make a perfect addition to any kitchen or pantry. Great way to keep a list going for groceries or just reminders. Easy to build using these free plans and just a few supplies.

Link Type:
free plans
Link Source:
H2OBungalow
House Bed Twin Size

Isn't this house bed adorable!! It would be a great way to transition a child from a crib to a big bed. Build it using the free woodworking plans at the link.

Link Type:
free plans
Link Source:
AnaWhite
Sponsored Ad

Free Woodworking Plan Pages

Sponsored Ad
Resources & Free Plans

Since 1998, we have curated the Internet's largest online woodworking resources database.

Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.

Visit Resources & Free Plans

Banner Adverts
Toy Soldier 8ft tall Yard Art Woodworking Pattern
Yard Art Angels Woodworking Plans
Good Tidings and Great JOY Nativity Word Yard Art Woodworking Pattern
Christmas Gnome No.8 Yard Art Woodworking Project
Merry AXmas Yard Art Woodworking Pattern.
4 Board Tabletop Reindeer Woodworking Pattern
8ft Tall Sasquatch Yard Art Woodworking Pattern
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2022 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2022 Kryptronic, Inc. Exec Time: 0.161216 Seconds Memory Usage: 5.27771 Megabytes
Kryptronic