These ornaments make wonderful presents. They can be attached to a refrigerator as a magnet or hung from a tree. Plywood of 2 square feet and 1/4 inch thick can be used to cut all 12 decorations. For the optional wind chime tubes, the patterns indicate where to drill holes. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.
Here's how to make a rustic planter for a patio or deck. Clay pots with a diameter up to 5-1/2 inches can fit through the opening if necessary. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.
The magazine and newspaper rack on this side table is included. shown with Table Lamp design W2054. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.
Up to five distinct 3D birds can be supported by this strong wooden stand. Use 2x6 and 2x10 lumber to construct. Use to showcase our tropical birds, such as the ones depicted here, showing our Eagle, Owl, Turkey Buzzard, or Red-tailed Hawk. Every pattern for the stand is fully illustrated. height of 53 inches. This bird stand plan does not include plans for the featured birds.
This wall mounted stationery organizer is perfect for your office or command center in your kitchen. Easy to build and perfect for keeping things in one spot.
Triceratops like this one look wonderful affixed to the fence enclosing a kids' play area as well as in your fern garden. 20 inches long and 12 inches tall when complete, the Triceratops. This woodworking plan offers detailed directions and full-size images for building the projects.
This pull-up bar is perfect for fitness exercises and doesn't require a doorway, in fact it is mush safer than the ones that require a doorway. It is built using 2x4s, 2x6s, 3/4 inch plywood and the free downloadable plans available at the link.
With this attractive country style shoe rack, closet clutter may be eliminated. The length that you cut your dowels to determines the breadth of the rack. The layout demonstrates where the dowels should go to accommodate storage for flat shoes or a customised variant that could accommodate high heel shoes. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.
This ornamental sliding door lock could offer security and safety. This woodworking guide demonstrates how to make three different holiday-themed door locks. The lower door bar piece should be cut to the appropriate length to accommodate your sliding patio door. The door bar makes it impossible for the door to be opened from outside. This woodworking plan includes instructions, exploded view diagrams, and full-size images.
No more keeping those lovely cards hidden in a drawer. Create a colourful tree-shaped ornament by inserting your holiday greeting cards into the slots. It holds 104 Christmas cards at a time. Cards can be seen from all directions because each level rotates.
Put a falling star in your pocket by catching it. The 7-1/2 watt clear light bulb that this gorgeous angel is holding shines through the blue-tinted acrylic stars on either side of her palm. Simple to construct with 1x12 and 2x10 lumber. Full-size images, exploded view diagrams, lumber layouts, and step-by-step directions are all included in this woodworking plan. When completed, this project will stand 46-1/2 inches tall.
Towels will always be available where you need them thanks to these upright paper towel holders. a cat, a cow, a duck, a cow core, a lighthouse, and an apple. This woodworking plan includes exploded view diagrams, step-by-step directions, and full-size pictures for each of the five designs.
The loon is the national bird of Canada and is also Minnesota's state bird. Its name comes from its distinct call which has become a symbol of the Canadian wilds. The mother loon will carry her young on her back. Make these loons from layers of 3/4 and 1-1/2 inch thick lumber pieces. All patterns for both projects are drawn full size. Measure 23 and 26 inches long.
Choose from four different plant hangers. The projects hang from a bracket with a C hook connector that allows you to turn the holder one-half turn to expose either side of the plant to the sun.
This striking wall decoration is easy to make with from 1/2 inch thick wood pieces. Approximately 13-1/2 x 13-1/2 inches. The Peace dove design may be displayed all year round. This woodworking plan provides full size illustrations, exploded view diagrams and instructions to make the projects shown.
A funny interpretation of the bent-over-themed yard decorations shows Mrs. Claus in an unfortunate situation. I'm about 21 inches tall. includes a paint guide. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.
A durable foldable table with stools is what this project is. The table and stools may both be folded flat for small, out-of-the-way storage. Build at least two stools to go with each table. Lumber that is 3/4 inch thick can be used to build this project. Apply an exterior stain or polyurethane to complete the process. Full-size images, exploded view diagrams, lumber layouts, and step-by-step directions are all included in this woodworking plan.
This Make-A-Boat kit combines learning with fun! With just eight parts cut from 3/4 inch thick hardwood, kids may use their imagination to construct an infinite number of boats. A fantastic scrap wood project with extra value. Dowel pieces with diameters of 1/4 and 7/8 inches are used during assembly. Alter the strategy to fit your resources. This blueprint outlines the construction of 18 different boats. Children can use their limitless imaginations to create additional designs! All of the pieces can be stored in the storage case's compartments. This plan comes with a reference sheet that is ready to use. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.
Ideal for the kitchen or hallway. Three distinct drawers are used to organise and keep valuables. Coffee cups, dried flowers, hats, and outerwear are held on pegs. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.
This traditional Santa craft is nearly 57 inches tall. It is intended to be constructed out of 1x10 and 2x10 lumber. Santa is holding a lantern. For a more illuminated effect, you may add a light bulb with a frosted tip. The plan's suggested paint colours were chosen to emphasise the Victorian aesthetic. Giving the project an antique appearance will require a fine coat of polyurethane varnish. Full-size images, exploded view diagrams, lumber layouts, and step-by-step directions are all included in this woodworking plan.
When positioned on top of your regular-sized toilet tank, this attractive and useful cabinet will maximise the amount of storage space in the bathroom. It has two covers that hinge. A box of tissues the size of a boutique is stored on one side, while a spare roll of toilet paper is concealed on the other. Use the area in the centre to store extra washcloths, makeup, potpourri, and other items. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.
One of the three little chicks is standing, another is pecking on the ground, and the third is barely poking its head out of its shell. Five separate pieces of 3/4-inch thick lumber are cut and glued together to form each chick. A great project using leftover wood. The female is standing and gazing up; she is around 7 inches tall. You can purchase the Yard Chickens plan W2425 individually. Full-size images, exploded view diagrams, lumber layouts, and step-by-step directions are all included in this woodworking plan.
This cute woodworking project might be used to keep paper or cloth towels. An upper shelf with a stylish gallery rail is included in the design for displaying treasures or keeping spices. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.
Tyrannosaurus like this one look wonderful affixed to the fence enclosing a kids' play area as well as in your fern garden. 13-1/2 inches long and 22 inches tall when complete, the Tyrannosaurus. This woodworking plan offers detailed directions and full-size images for building the projects.
The woodworking plan for this jewellery box includes a tilting mirror. If desired, the mirror and frame are simple to remove. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.
The charming appearance of this outdoor coffee table is created by its elegant curves. With our Cozy Garden Bench W2305 and our Cozy Garden Chair W2321, this table makes the ideal complement. Three separate plans are offered. Full-size images, exploded view diagrams, lumber layouts, and step-by-step directions are all included in this woodworking plan.
These folk art lanterns soften the lighting in any space. Each project needs a wire bail handle and an electrical wiring harness with light. You can optionally install a coloured plastic panel beneath the ornamental cutout. This woodworking project includes directions for making a heart, tree, apple, star, pear, and snowflake as well as full-size pictures and exploded view schematics. The lanterns have a 5-1/2 x 5-1/2-inch square base and an 8-3/4-inch height.
Our Rowboat Planter W2160 (sold separately) is intended to be used with these boys and girls. At the knee, the kids legs can pivot. The clothes for 18-month-olds fit both Rowboat Kids. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.
What a nice way to arrive home each day to be greeted by this dog clutching a bone. 13 1/2 x 16 3/4 inches in size. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.
All three of the cribbage boards—the Trout, the Mallard Duck, and the Battleship—have full-size designs available. When not in use, it can serve as a wall ornament thanks to a hanger slit that is cut into the rear, as demonstrated by The Trout. When hanging it up, insert the cribbage pegs into the board's edge behind the head. The head of the duck may be removed to reveal a compartment for the pegs. The pegs can also be utilised as gun barrels for the battleship. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.