Wall Construction

This wall-mounted plate rack would be a fantastic addition to any kitchen. You can adjust the measurements to suit your dish collection. Follow along at the link to build this modern plate rack.

This is a link to a Google 3D SketchUp drawing for a wall cabinet designed for holding your drills and your favorite cordless drills. There are seven drawers and ample space to build in drill holders on the doors. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

You could use this tutorial to only build a floating bench, but take it one step further and build the wood feature wall for a complete look. Beautiful!! Follow the process at the link.

The cabinet is approximately 24 inches wide, 12 inches deep, 30 inches tall and has a single shelf centered inside. The main carcase is built from solid oak dovetailed together on the top and bottom, with the back assembly and the two doors built with with frame and panel joinery.

Studwall, Pole Wall. This free farming construction plans and projects information is courtesy of the North Dakota State Univ. web site. Follow the instructions on that page to quickly find the plan number. This plan number is CAN-2124.

This geometric mountain wall art is awesome. Customizable too! Also...the whole thing was built using 1/2 inch thick plywood. Follow along at the link and get inspired to build your own wooden mountain wall art.

Free plans to build this arched top wall mirror with curved drawers. Perfect for a front entrance or hallway.

Sloped open beam ceiling, raised wood floor or concrete floor. Plan # 7215.

We will show you how to build an attractive retaining wall that is firm, solid and will stand the test of time. This DIY retaining wall features a solid base, compacted base material and good drainage. The masonry wall looks great from the front, too, and will enhance the look of your yard.

In this page I share with you a large collection of free scroll saw fretwork patterns. I have carefully scanned them and transformed them into pdf files. These patterns were published long ago in Hobbies fretwork magazine. They are offered here with permission of the present Copyright holders, Hobbies Limited. Project #1726.

This is a link to a Google 3D SketchUp drawing for a wall mounted cabinet that could be used in the bathroom or just about anywhere. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

This is a 10 foot Work Bench I made for wood working, however it could be used as the every day work bench. Classic dovetails for the drawers, half lap for the beams and legs.

May be suitable for carving, woodburning (pyrography), intarsia or scrollsaw ideas.

An easy way to make better use of any shop space is to organize where and how your most-used hand tools are stored. This compact, wall-mounted tool rack does just that. Best of all, the design offers flexibility to customize it for your own needs. The cutting diagrams and materials list are available to download in this Online Extra.

Follow along and build a wall mounted tool cabinet. This project has a full tutorial with pictures. Be sure when you get to the bottom of the page to click on -next post- to continue reading.

Slab, crawlspace or basement. Follow the instructions on that page to quickly find the plan number. This plan number is 7270.

While this resource is a craft project, you could easily convert it to a scrollsawing project with a unique mounting frame.

Unusual...sure, but practical if you own a cat! Build your cat a set of wall-mounted cat stairs using the free information at the link. Adjust the plans to build as many stairs as you need for your cat.

If you need more storage in your life, perhaps you should build a wall cabinet with sliding door. At the link you will find free plans to build this cabinet.

If you are short on space in a kids room here is a great way to incorporate a desk for homework. Build one using these instructions.

From Chris Swingley - This is a great project to exercise your woodworking skills without using a lot of wood. A step by step tutorial on how I built them can be found on this page. The plans call for about 6 board feet of wood, and the final dimensions are 8 inches deep, 21 1/4 inches wide and 13 inches tall.

This simple wall-mounted bike hanger is perfect for keeping everything you need to go biking in one place. You can build it out of wood from your scrap pile.

These shelves are wall mounted.

Build this wall mounted organizer with these free woodworking plans.

Build a wall mounted desk using these free step-by-step woodworking plans.

This is a link to a Google 3D SketchUp drawing for a tree swallow nest box with hinged side allows access and is weatherstripped to keep out rain. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

This shelf features eight small cubbies in a vintage paint finish. Free simple step by step plans use standard lumber and simple tools. Build this Number Cubby Shelf for under $10.

Real cute wall shelf for a childs room. Shaped like a baseball glove and holds bat, ball, and hat. DXF Format.

Australian Woodsmith is a practical magazine for all woodworkers. From Issue 34. Materials, supplies lists and cutting diagram only.

This is a link to a Google 3D SketchUp drawing for 6 foot workbench to be set against a workshop wall with peg board mounted between the uprights for tool storage. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.