Birdhouses

Cute lamp in the form of a two-story birdhouse. Nice weekend project. DXF Format

Marilyn got the idea for this at a you-paint ceramics store that had a ceramic purse/vase. I did the design and all the building and she did all the hard work of making it a piece of art. We think you will like this little project.

Every woodworker needs to build a replica plane birdhouse. So cool. You will need 10 to 12 board feet of a exterior grade lumber to build this birdhouse, especially if you want it to last for a long time.

This is a link to a Google 3D SketchUp drawing for a birdhouse to be mounted on a wall or post. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

I will explain the basic steps of building a turned birdhouse. Once you understand the process, try designing and building your own birdhouse.

Bluebirds and wrens, as well as swallows, nest in this style of house though they prefer a deeper cavity.

The front gable is open, entrance to the room below being through the rear of the upper floor. This house can be opened for cleaning by lifting out the upper floor.

Free Birdhouse Woodcraft Patterns from Country Corner Crafts web site.

Build a cheap birdhouse using scrap plywood, juice cans, small hinges, and a kitchen garbage bag

This is a small and simple bird house suitable for the junior woodcrafter.

A birdhouse suitable for members of the woodpecker family and also for nuthatches and titmice, including chickadees.

This is a link to a Google 3D SketchUp drawing for a simple birdhouse you can build for less than $5. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Here is a simple bird house plan.

In the spring it is time to start thinking about those little birdies. They are going to be looking for a nice place to set up house and we think this one is pretty neat.

This article describes how to create a bluebird house kit that is easy to produce and costs very little. You can use the kits as a youth project, or you can assemble them yourself and put them around your property if you are interested in attracting bluebirds.

This is a link to a Google 3D SketchUp drawing for a birdhouse. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

These tall and lanky birdhouses are perfect for not so deep shelves in your home and have a warm country look to them. These are crafted within a day and easy to make for novice sawers.

This birdhouse will take just a short time to build and your feathered friends will enjoy a cool place to land.

If Mid-Century Modern is your thing or if you wish to build a birdhouse that is a little different, then this one is for you.

Here is a terrific birdhouse that is as enjoyable as the aroma of the mornings first pot of coffee.

This is another very simple project when pre-cut pieces are used. All parts are cut from 3/4 inches pine planking scraps. The bottom is held in place with two 1-1/2 long counter-sink screws. Use the diagrams to cut out all pieces to the specified sizes.

These decorative birdhouses were created using a scroll saw. At the link are instructions as well as downloadable patterns.

Build your own backyard birdhouse using only a few common workshop tools and a cedar fence board. Follow along at the link to see how we did it.

The flicker birdhouse shown in figure 23 is designed to be placed on a post or the stub of a tree. The roof can be lifted in the same way that a stopper is removed from a bottle.

May be suitable for carving, woodburning (pyrography), intarsia or scrollsaw ideas.

Roof and house sides of the wren house are made of either inch or 5/16 inches apple crate lumber. The four roof boards are cut with compound angle cuts with the miter gage set at 50 degrees and the saw blade tilted at 24 degrees. All cuts are made with one miter gage setting by flopping the piece as shown in Photo No. 2.

This birdhouse is so easy to make from scraps, it would be a great afternoon project to make with the kiddos!

At the link you will find the instructions to build a wooden birdhouse for your backyard. It is so easy even a child could build it with supervision.

With only a few tools and some cedar, you can build this modern birdhouse.

This shed-roof birdhouse, sized for small birds such as wrens, chickadees, and bluebirds, incorporates bird-friendly characteristics: the deep overhang, perchless entry, openings for air circulation, and easy access to the interior for cleaning.