Lathe Turnings

Australian Woodsmith is a practical magazine for all woodworkers. From Issue 21. (Australia)

Turn this ring holder on your lathe. It would make a perfect gift. Follow along at the link to see the project completed.

Follow along at the link (there is a video as well) and make your own turned plywood coffee tamper. Everyone could use one of these, right?

Create handles fit for a craftsmans tools by gluing blocks of scrap wood and turning them on the lathe.

Follow along with the step-by-step instructions and get your lathe ready to create a rolling pin.

You will need a lathe and router for this project. At the link you can follow along to see how it was done.

By Bruce Bernson - A test-tube insert enables this beauty to hold fresh-cut flowers.

A lidded box presents two unique challenges. One is creating the perfect fit between the lid and base. Think of it as a precise joint that is designed to come apart.

To turn the handle of this ice cream scoop a hardwood is recommended.

At the link you will find videos as well as full instructions with pictures for turning a bottle stopper.

By Steve Blenk. Got an offcut from a beautifully figured board? Turn it into a plate! Standard 3/4 inch wood and a shop-made chuck are all you need.

This wooden handle was turned for a measuring spoon. Follow along and see how it was done.

If you have never tried multi-axis turning, there is a whole new realm of design possibilities waiting for you to explore. I will introduce you to the joys and challenges of multi-axis turning with a simple project - a lidded box.

Follow along and learn how to turn a small lidded box. Perfect for small trinkets or treasures.

Follow along at the link and learn how to turn wooden spinning tops on the lathe.

Follow along and see the process of turning a lace ornament.

Making a chess set is an exercise in repetitive turning. Formed cutters - scrapers ground to the shape of the piece - make it easy to turn duplicate pieces.

Turn a beautiful bird feeder on your lathe using these free instructions. Be sure to follow through to page 2 for turning the bowl.

If you have a lathe, why not give this project a go. Make your own rolling pins. Perfect for gifts too!!

Follow along and turn a yoyo. Great for gift giving too.

I will explain the basic steps of building a turned birdhouse. Once you understand the process, try designing and building your own birdhouse.

At this link you will find downloadable plans to make all three profiles of napkin rings.

This turned salad bowl is approximately 8 inches in diameter and 4 inches high. This salad bowl features a decorative textured band just below the rim on the outside added with a texturing tool. Follow along at the link to turn your own bowl.