Lathe Turnings

Aren't these tree and snowman earrings fun!! This project requires a lathe but would be great for gift giving. Follow along at the link and make a few pairs for friends and family.

This 3-point scrap plywood bowl is quite beautiful but you will need a lathe to make this project. Follow along at the link to see how it all comes together.

Isn't this a smart idea!! Get your lathe tuned up and make these tops to turn drinking glasses into vases. Great for a gift too.

Piggy Bank...makes a neat turning project. The wood stock is maple. Feet are painted black; ears and nostrils are touched with pink. The two front legs fit holes drilled in the body; back legs are cut to conform to curve and are nailed and glued in place, as shown.

This captive ring baby rattle is a project for all you woodturners. You need a lathe to complete this project but just look at the end result. Follow along at the link to see how to do it.

Here is a really nice old-fashion set of lathe turned dolls that are quite easy to make.

This is a project gone wild due to a lathe in the shop. What happens when you try to build what could have been a simple kitty condo in a shop with a new lathe? 18 columns, a total of 158 beads and 19 balls, among other spindle fanciness, highlight the excesses resulting from a near total lack of design control. Let is hope the cats are impressed.

Cute right? If you own a lathe and enjoy turning then perhaps this project is for you. You can now turn a set of bears using the free woodworking instructions at the link. The contrasting wood used in these bears makes them awesome.

FIRST, turn a prototype leg. Place your prototype leg directly behind the blank for each final leg. By sighting along the upper horizons of both pieces, you will simplify the process of repeating specific shapes.

This is a link to a Google 3D SketchUp drawing of a finial to be used on a headboard or footboard. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

If you have a lathe and want a new project, perhaps this hat and coat rack combo is for you.

Australian Woodsmith is a practical magazine for all woodworkers. From Issue 21. (Australia)

This is a link to a Google 3D SketchUp drawing for a turned darning egg. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Australian Woodsmith is a practical magazine for all woodworkers. From Issue 43. Pattern only. (Australia)

Turn a birch vase by following along with these instructions. Be sure at the end of page 1 to click on -next- to continue to follow along.

Diagram only with dimensional information. I thought the Inlaid Cup was a little bit much as my first project using Segment Designs, so I simplified it, constructed it, and you can see the result...

Ever thought of turning your own wooden spoons? At the bottom of the page at the link, be sure to click on the NEXT button to continue the process.

Secure the blank in your scroll chuck with the grain running parallel to the lathe bed. Use your drill chuck in your tailstock to drill a 16mm hole 1 inches deep in your blank. Next,...

I am not really sure what to call these figures. They are not really winged or natural edged bowls because there is not enough bowl inches in the center.

This makes a neat holder for a ball of crochet cotton. The diagram at is one-half full size, making it simple to pick off all essential dimensions.

The lure of turning green wood has been the cause of a great deal of frustration among novice and advanced wood turners.

I love how a custom handle feels and works in MY hands: fit to my grip, my turning style, and a length that gives me proper leverage.

Follow along at the link to see how to make a captive ring baby rattle on the lathe.

Diagram only with dimensional information. Here is a playful piece borrowed from the old West.

The Concord Table, also known as the candle stand table, is a traditional American Favorite. Our version lends itself to being a gift project because, by using a lathe duplicator, you can easily produce multiple spindles.

Courtesy of Hands On, Nov/Dec 1980 - For most of us, it was our first woodworking project - turning a bowl on a lathe. But afterwards we went on to bigger and better things, and forgot about that simple bowl that once had us basking in the glory of our own accomplishment.

Here is a different way to turn a platter. By Johnny Tolly.

This platter was turned from walnut and measures about 14 inches in diameter. You only need 4 turning tools for this project. The blank was about 1 1/2 inches thick. Follow along at the link to see how it was turned.

How fun is this!! If you are a woodturner, here are the free instructions to turn a few spin tops on the lathe. For this project a fine-grained wood such as birch, maple or cherry is the best option.

Learn how to turn your own set of darts. Perfect for someone who loves to play the game.