Nautical and Marine woodworking projects

Our Rowboat Planter W2160 (sold separately) is intended to be used with these boys and girls. At the knee, the kids legs can pivot. The clothes for 18-month-olds fit both Rowboat Kids. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.

This adorable boat does not have a bottom. Use the boat to surround a flower bed or place it on a patio and fill the inside with potted plants. Place additional potted plants on the seats. As a companion project you may wish to order the Rowboat Kids W2164. The Rowboat Planter boat measures 67 inches long.

Beautifully fashioned but made using very basic joinery, making construction straightforward. The three wire socket allows you to illuminate either the upper bulb alone, the lighthouse's interior alone, or both areas simultaneously. bottom storage drawer made primarily of pine that is 3/4 inch thick. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects. The lighthouse is 19-3/4 inches tall from the ground to the top.

Build this large riverboat for your yard or garden pond. The boat can be suspended just slightly above surface of pond on bricks or metal pipes. The paddle wheel turns via a stream of water from a submersible pump. The project can also be docked by placing it on the ground at the edge of your pond with just the paddle wheel over the water. Made primarily from two sheets of 1/2 thick plywood and standard lumber sizes. Measures 32 inches high x 22-1/2 inches wide x 60 inches long.

On one side of these projects it says Welcome, while on the other it says Gone Fishin. You may just construct a fish and flip it over, or you can hang the plaque from the fish and do the same. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.

The 21 x 28-inch cottage base can be used as a stand alone yard ornament or adjacent to the Lighthouse project to create a more comprehensive marine picture. This blueprint demonstrates how to cut out the windows and doors. This blueprint also outlines how to create a lighthouse keeper figure.

A distinctive birdhouse in the shape of a mariner on the open seas wearing recognisable yellow rain gear. Use as a decorative item indoors or outside, or as a charming outdoor nesting chamber. Join our Sea Captain and Pirate Birdhouses with this Mariner. Every plan is drawn in its entirety. 15 inches tall, 10 inches wide, and 7 inches deep is the size of the project.

Use a Mason jar, coat hanger wire, and leftover 3/4-inch-thick hardwood to construct this red lantern. resembles a vintage kerosene light. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects. Without the wire handle, it stands 10-1/2 inches tall.

A wonderful birdhouse for your yard that is nautical. You may use this Sea Captain birdhouse indoors to complement a nautical theme. The patterns shown are all full size. When built, it will be 9-1/2 inches wide, 15-5/8 inches high, and 6-3/8 inches deep.

You may fill the five display shelves in this lighthouse cabinet with your favourite memorabilia. When built, this structure stands 71 inches tall and is mostly made of three-quarter-inch pine.

This practical and decorative nautical project holds up to 75 feet of garden hose. Build it from 1/2 inch thick exterior grade plywood. All patterns drawn to full size. Measures approx. 28 inches high.

The ideal finishing touch for our previous projects using nautical furnishings. Use it as a side table, an end table, or a plant stand. Use common 3/4 and 1-1/2 inch thick lumber to construct it. The 24 inch height of the table. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.

Lots of shelf space so you will have plenty of room to show off your favourite nautical collectibles! The main section of this striking furniture piece is made from 1/2 inch thick plywood! The top is made from 3/4 inch thick pine. This woodworking plan provides full size illustrations, exploded view diagrams, lumber layouts and instructions to make the project shown. This lighthouse display shelf measures 70 inches tall x 24 inched wide x 15 inches deep when built.

Included are the three blueprints for the seagull welcome sign, swaying seagulls, and pelican. Use them to complement our Lighthouse W2026, sold separately, or use them as standalone yard ornaments. The sea gull perched on the three posts is about 32 inches tall. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.

This project is made of 3/4-inch thick wood and is modelled by an actual brass mariner's lantern. You can either make the handle and side wires from solid brass wire or by cutting wire clothes hangers.Height of 11 inches.

These typical sailor knots are displayed on this wall. The project plan includes diagrams of each tied knot. The entire wording is provided via a convenient decal. Full-size images, exploded view diagrams, lumber layouts, and step-by-step directions are all included in this woodworking plan. The project is 12-3/4 inches broad by 19 inches high.

This elegant sailor welcomes your guests while standing 58 inches tall and holding a light in the air. The 2x12 lumber is used for the main body. This woodworking plan includes instructions, exploded view diagrams, and full-size drawings to help you build the project.

This sophisticated coffee table has a whale-shaped cutout in it. The table top is constructed from 1.5 inch thick wood. The table's legs have been bent to resemble oar handles. The legs for this project must be turned on a lathe. Plans are illustrated in full size. 18 inches high, 24 inches broad, and 58 inches long.

Picture this ornamental cannon in a nautical theme tucked under an end table or near to your fireplace. It is shown with accents made of walnut and wood. The barrel for this project must be turned on a lathe. Plans include detailed diagrams and patterns. 17 inches long, 13-1/2 inches wide, and 13 inches high approximately.

The birdhouse project is one in a series of nautical birdhouses. By making the companion projects #19-2987 Boathouse and #19-W2989 Lighthouse Cottage Birdhouse (each sold separately) you can make a complete nautical theme village. This birdhouse can be used outdoors as a nesting cavity for birds but can also be used indoors or outdoors as a decoration. Approximately 16 inches tall.

This substantial anchor may be made quickly to create a nautical yard ornament. The shank of the anchor is 40 inches long. An anchor of this size can be constructed for a fraction of the cost of a real one, which would cost hundreds of dollars. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.

The 4 foot Lighthouse is the ideal size as a decoration for either indoors or outdoors. Pine and plywood with a combined thickness of 3/4 inch were used to create the 2 foot Mariner figure. He is keeping a close eye on the horizon while having his telescope at the ready.

Your yard will seem amusingly nautical with this buccaneer birdhouse. It can be used outside as a real birdhouse for nesting purposes or indoors as a nautical ornament. Every pattern in the illustrations is drawn at full scale. Size is 15 inches tall, 10-3/8 inches broad, and 6-3/8 inches deep.

A typical sight among lakes, rivers, and oceans is the sea gull. These undertakings have been painted to mimic the well-known herring gull. The items depicted in this woodworking design may be made for a gull that is standing still and one that is just landing thanks to the full-size drawings, exploded view diagrams, and instructions provided. Each product is constructed using many layers of lumber that is 3/4 inch thick. They are simple to create and paint due to their layered nature. The gull is 15 inches tall when it is standing. The landing gull has a wingspan of 31 inches and stands 18 inches tall.

The straightforward construction of this project is facilitated by the boat's uncomplicated design and the full-size blueprints provided for the majority of its components. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.

It is adored by everyone who sees it. This tiny rowboat, about the size of a coffee table, appears really real. All of the internal ribs, the seats, and even the foot boards are included. Its construction is very different from the boat bookshelves, despite the initial appearance.

A floral container with a nautical theme. Put one underneath each window, or hang a few along your fence or deck railing. It is known as the SS Geranium. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects. Clay flower pots can be placed indoors thanks to the drain holes on the bottom. 36 inches long.

This ship's wheel, which has a diameter of more than 48 inches, resembles the actual steering wheel of a sizable sailing vessel. It will be the centre of attention in any room when used as wall art. The wheel can be used as a lawn or garden ornament thanks to plans that demonstrate how to build an optional display stand. Full-size images, exploded view diagrams, lumber layouts, and step-by-step directions are all included in this woodworking plan.

The low voltage or solar landscape lighting is intended to be utilised in combination with this lighthouse project. The lighting do not need to be changed for this project. We only made the lighthouse simple enough that you can add one light to the top of each one you construct. You have the option of creating one lighthouse or one for each light in your set. Full-size images, exploded view diagrams, lumber layouts, and step-by-step directions are all included in this woodworking plan.

These beautiful nautical stanchions can be used to illuminate your walkway, accent your garden or decorate your patio, deck or dock. Each stanchion is connected by a large diameter manila rope which passes through the holes in the top of each stanchion. As an option, accent with a low voltage light inside each one. This woodworking plan provides full size illustrations, exploded view diagrams and instructions to make the projects shown.