Workshop Woodworking Jigs More woodworking related jigs that you can shake a stick at! Accessories for the tablesaw, bandsaw, workbench and worktables, drill and sander jigs, and so much more. Check out the other free woodworking plans categories also.
Location

Workshop Woodworking Jigs

Workshop Woodworking Jigs

More woodworking related jigs that you can shake a stick at! Accessories for the tablesaw, bandsaw, workbench and worktables, drill and sander jigs, and so much more. Check out the other free woodworking plans categories also.

Sponsored Ad
Resources
1-30
31-60 61-90 91-120 121-150 151-178
Jig, Chip Chute (ZIP)

A chip chute for the Dewalt 12-1/2" planer. DXF Format

Link Type:
free plans
Link Source:
WoodworkersWorkshop
Jig, Miter Board

Isometric drawing of a shooting board used to cut 45 degree angles for frames. For use with a table saw. DXF Format

Link Type:
free plans
Link Source:
WoodworkersWorkshop
Jig, Honing Guide

A jig for holding plane irons while sharpening. Designed to work with 3M paper on 1/4" glass plate. DXF Format

Link Type:
free plans
Link Source:
WoodworkersWorkshop
Jig, Router Guide (ZIP)

A simple guide for routing decorative grooves in boards. DXF Format

Link Type:
free plans
Link Source:
WoodworkersWorkshop
Jig, Splined Miter (ZIP)

A clever jig used to guide a router while cutting cross dovetail splines in a miter joint. Zip file includes .jpg photo of jig in use. DXF Format

Link Type:
free plans
Link Source:
WoodworkersWorkshop
Jig, Curved Stairs Nosing - Jed Dixon

Jed Dixons Curved Stair Nosing Jig by Dan Parish.

Link Type:
free plans
Link Source:
Gary Katz
Log Flattener Jig

This is a link to a Google 3D SketchUp drawing for a log flattener jig. This jig makes several close cross cuts at a controlled depth across a log. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type:
free plans
Link Source:
Google 3D Warehouse
Jig, Faceplate Cutoff Fixture

I turn almost all of my turnings glued to a faceplate. I usually part the turnings off the faceplate but I wanted to share a fixture that my friend Sonnie Sharrar uses to cut the faceplates off his bowls. The fixture in the photos is a bit different than Sonnie, but I tend to turn larger bowls and this fixture can handle them.

Link Type:
free plans
Link Source:
TurnedWood
Jig, French Curves

Three french curves. 4.5", 9", & 18". Paste onto hardboard or plastic. Trim and sand smooth. DXF Format

Link Type:
free plans
Link Source:
WoodworkersWorkshop
Jig Saw Circle Jig

This is a link to a Google 3D SketchUp drawing for a jig saw circle jig which can cut circles up to 70 inches in diameter. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type:
free plans
Link Source:
Google 3D Warehouse
Sponsored Ad
Jig, Dado Setup

Whenever you need to make a series of matching dadoes for a project, the most important part of the process is aligning the two shoulder cuts of the dadoes accurately to the blade. Here is a simple jig you can build to help make this job a lot more accurate.

Link Type:
free plans
Link Source:
WoodworkingTips
Bench Dog

This is a link to a Google 3D SketchUp drawing for a bench dog. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type:
free plans
Link Source:
Google 3D Warehouse
Frame Miter Clamping Jig

This is a link to a Google 3D SketchUp drawing for a frame miter clamping jig. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type:
free plans
Link Source:
Google 3D Warehouse
Jig, Butterfly Templates(ZIP)

Two template drawings of butterfly patches (Dutchmen) for fixing flaws in wood surfaces. Seven templates in all. For use with router and insert collar. DXF Format

Link Type:
free plans
Link Source:
WoodworkersWorkshop
Band Saw Log Resaw Sled

This is a link to a Google 3D SketchUp drawing a shop built sled to allow resawing found wood into lumber useful for woodworking projects. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type:
free plans
Link Source:
Google 3D Warehouse
Jig, Half Ring Rim

This table saw jig trims the ends of segmented half-rings so the half-rings fit together into a perfect ring.

Link Type:
free plans
Link Source:
TurnedWood
Jig, Unisaw Insert (ZIP)

Aluminum throat plate for the Delta Unisaw. Has machined dovetailed opening for zero clearance wooden inserts. 1" opening accomodates Freud Super Dado. Print out drawing and take to a machinist. DXF Format

Link Type:
free plans
Link Source:
WoodworkersWorkshop
Compass Tripod

This compass can mill small circles without having to drill a center. This is a link to a Google 3D SketchUp drawing . You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type:
free plans
Link Source:
Google 3D Warehouse
Jig, Slot Cutting - Large

My approach to cutting the slots started out the same as my old technique. After marking out the shape of the slot, I drilled the two end holes on my drill press. A simple fence helped me keep the holes lined up. But from that point on, I did things differently.

Link Type:
free plans
Link Source:
WoodworkingTips
Jig, Drill Press Pocket Hole

The pocket hole joint is one of the easiest joints to make. This joint is much faster and simpler than dowel joints because you only drill the hole in one of the pieces you need to join. You simply apply some glue, clamp the pieces together, and insert the screw.

Link Type:
free plans
Link Source:
BobsPlans
Sponsored Ad
Plane Blade Sharpening Jig

This is a link to a Google 3D SketchUp drawing for a jig I use to sharpen the terminal part of the face (non-bevel side) of a plane blade. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type:
free plans
Link Source:
Google 3D Warehouse
Jig, T-Bar gluing/finishing (ZIP)

A simple but highly useful jig for help in clamping panels, applying finish, and cutting sheet goods. Yyou will want to make several! DXF Format.

Link Type:
free plans
Link Source:
WoodworkersWorkshop
Miter Joint Clamping Jig

This is a link to a Google 3D SketchUp drawing for a simple miter joint clamping jig, made from scraps. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type:
free plans
Link Source:
Google 3D Warehouse
Jig, Solid Wood Edge Banding

A great small jig for edge banding plywood with solid wood strips.

Link Type:
free plans
Link Source:
WoodworkingTips
Jig, Router Circle (ZIP)

Circle cutting jig for router. Handles circles from 7" to 36". DXF Format

Link Type:
free plans
Link Source:
WoodworkersWorkshop
Jig, Vaccum Hose Bracket

The drum sander on my drill press works great for sanding curves but it produces lots of dust. So to collect the dust, I slip the hose from my shop vacuum into a bracket attached to the column of the drill press, as shown in the photo. Besides keeping the hose steady during use, the bracket is easy to adjust. This way, you can put the end of the hose right where you need it.

Link Type:
free plans
Link Source:
WoodworkingTips
Jig, Handy Casing Cutting

To dress up a plain-looking casement around a window and door, you do not have to replace all the moldings. Just add built-up pediments or corner blocks as you can see in the two photos...

Link Type:
free plans
Link Source:
WoodworkingTips
Jig, Miter Biscuit-Joint

This biscuit-joint miter jig makes it easy to biscuit-join mitered corners, even in thin stock.

Link Type:
free plans
Link Source:
American Woodworker
Jig, Small Piece Miter Gauge

I make a lot of small picture frames for gifts. But there is a couple of challenges: mitering the small pieces accurately and holding them safely. So I have made a jig designed to help with this. It is nothing more than a shallow box attached to a miter gauge runner.

Link Type:
free plans
Link Source:
WoodworkingTips
Jig, Biscuit Jointer

By Gord Graff - I was presenting a seminar on biscuit joinery the other night and after the class one of the attendees came to me and could not believe how my simple biscuit joiner jig could solve a number of problems he had. He was so amazed with the simple thing that the only thing I could do was hand it to him and say, here you go. After giving it away I knew that I would have to make a new one, so this morning I did just that and documented it in hopes that it may help someone else.

Link Type:
free plans
Link Source:
WoodCentral
Resources
1-30
31-60 61-90 91-120 121-150 151-178
Sponsored Ad

Free Woodworking Plan Pages

Sponsored Ad
Resources & Free Plans

Since 1998, we have curated the Internet's largest online woodworking resources database.

Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.

Visit Resources & Free Plans

Banner Adverts
Maritime Bar Stool and Lifeguard Chair plans
Momma Sasquatch and Littlefoot Yard Art Woodworking Pattern
Card File Octagon Cabinet
Infant Rocking Horse
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2021 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2021 Kryptronic, Inc. Exec Time: 0.198559 Seconds Memory Usage: 5.839584 Megabytes
Kryptronic