WoodworkersWorkshop®
Build this plant table for outdoor displays. It features two removable trays with cut-out handles. The trays and bottom shelf are slatted for drainage. This is a vintage woodworking plan. Visit our F...
R_UBILD791
R-UBILD791
8.95
WoodworkersWorkshop
https://woodworkersworkshop.com/Item/R_UBILD791
Finished Dimensions
Height: 34 inches (86.4 cm)
Width: 46 inches (116.8 cm)
Depth: 15 inches (38.1 cm)
Published Date: 1987
Plan Language: English, all measurements are inches/feet unless stated otherwise.
Wood and/or Supplies needed: Two removable trays with cut-out handholds. Trays and bottom shelf slatted for drainage. 34 in. tall (standard counter height) by 46 in. long by 15 in. deep.
Condition of this recycled plan: Excellent (priced as marked), we have a few copies of this plan available. Plan is printed on one sheet of 22 x 34 inch paper.
This mission style small table is suitable was a side table or to be used as a pedestal for a potted plant. This simple assembly consist of 4 parts and can be made with as little a one piece of 1 x 10...
A collection of easy to build planter boxes and plant stands. A great way to make use of scrap pieces of wood. Full size line art drawings.
This multi-purpose plant stand can be utilised in a corner, against a wall (make two), or as a four-piece stand-alone plant display centre. Plants in pots are shown on four levels. It can be used both indoors and out on the patio. 1x12 lumber was used for this project.
3/4 inch thick and 2x2 inch stock can be used to make a lovely floral plant stand to enhance your home or patio. Plants and flowers with pot bases up to 7 inches in diameter can be supported by multi-level bloom platforms.
The base of this plant stand is made up of three cute puppies. Each puppy is in a unique but endearing position. This is a simple craft that can be made out of 3/4 inch thick timber. All of the patterns are drawn full size in their entirety. The top is 12 inches in diameter and is 6-1/4 inches tall.
Three majestic moose create the base for this attractive plant stand. The large 11 inch diameter top will accommodate even larger flower pots. Simple construction from 3/4 inch thick pine and 7/16 inch thick for the antlers. All patterns drawn FULL SIZE. The moose stand is 11-1/2 inches high.
Make this friendly hippopotamus for your garden. Easy to make from 3/4 inch thick lumber.
Make this lovely flower cart for your yard. We designed it so you can cut all the parts from 1x12 boards - no edge gluing required!
Traditionally styled, yet simple to construct, this sensational oak support will serve as a fitting display for even your best sculpture or carving.
If you stumble over potted plants every time you step onto the porch or patio, you should build this sturdy stand to get that flora off the floor. And, it is pretty enough to bring inside along with t...
