The plan says: Build this attractive wall rack for the home magazines. Its display of timely, colorful covers will add to the rooms decor, and the group will compete as conversation pieces. There is a full-size pattern for the curves of the back, front and ends of the rack, and when you have laid these out on 1/4 inch plywood, the cutting and assembling will be simple operations. There is a shelf to support the short magazines and dowel sticks to prevent the magazines from falling forward.Visit our FAQ page for a full definition.
Height: 21 inches (53.3 cm)
Width: 23 inches (58.4 cm)
Depth: 5.625 inches (14.3 cm)
Plan Language: English, all measurements are in inches.
Condition of this recycled plan: Excellent (priced as marked), we have one copy of this plan available. Plan is printed on one sheet of 17 x 22 inch paper, bonus pattern included on the reverse.
This is a vintage plan. We classify a plan as vintage based on two primary conditions; 1. its at least 20 years old and/or 2. the company that produced the plan is no longer in existence. Vintage plans were typically printed many years ago, thus, they may not contain the same amount of detail as found in plans produced today and they may refer to hardware and terminology not currently in use today. The copy you see here is one that we acquired through the purchase of wholesale lots of woodworking plans from individuals, estate sales or inventory buy outs of companies no longer in business. We have inspected the plan to make sure its condition is suitable for sale. The price reflects its condition. Pictures we use are either ones directly from the plan, or from images we found online. Please see the larger image slideshow to see pictures (if available) of the item you will receive. This plan may reference hardware parts that are no longer available so please be flexible in your building process. We do not have sources for out-of-date parts unless otherwise stated in the description above.
A basic build table that can make use of scrap wood boards or recycled pallet pieces.
This project does require an angle cut, some curve cutting of the decorative scrolls and some fairly accurate drilling.
This attractive country style basket rack could be mounted to any flat surface or make two and place them back to back of each other. An excellent tool tote in the garden too. This project does require...
This is a nice design that may be made with good workmanship and a nice finish for personal use or bang them out with glue, finish nails and a coat of stain for inexpensive products to sell.
We really enjoy this simple design because it may be made shorter or longer, narrower or wider without taking up any more floor space.. Formerly called Wall Magazine Rack.
Looking for a project to test your skills in joinery? This magazine rack features a center-lap joint that not only crosses at an oblique angle, but is tapered to boot! It begs to be cut by hand, and ...
Do you keep back issues of WOOD magazine for reference? To house both the past issues of WOOD magazine and the newly upsized version, build these handsome and handy magazine file boxes. These boxes ...
This table has a dual personality. Parked beside your sofa, its concealed casters let it masquerade as an end table with a magazine rack. Wheel it around front, cantilever it over the cushions, and it...
Keep your reading materials, whether books or magazines, in order with this convertible case. You can hang one on a wall, set one on a desk, or stack several of them on the base as a beautiful all-in-...
Placed beside a sofa or easy chair, this handsome accessory keeps favorite reading materials at hand and provides a place for a beverage, TV remote, lamp, or other objects essential to your relaxation...
Since 1998, we have curated the Internet's largest online woodworking resources database.
Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.