ArborTech Tools
This package of tradesperson chisels in combination with your Arbortech™ Power Chisel (or suitable converted 4 or 4.5 inch angle grinder) will make short work of joints, recesses, dovetails and any ot...
63_PCH_FG_031
63-PCH-FG-031
58.84
WoodworkersWorkshop
https://woodworkersworkshop.com/Item/63_PCH_FG_031
This package of tradesperson chisels in combination with your Arbortech™ Power Chisel (or suitable converted 4 or 4.5 inch angle grinder) will make short work of joints, recesses, dovetails and any other number of situations were wood removal is needed, either a small or larger amount. Chisels are high strength steel and heat treated for best performance in hardness.
This accessory will turn your angle grinder into a precision shaping tool. The clear, tough polycarbonate shield will allow you clear view of your work while redirecting the wood chips away from you. ...
These replacement carbide teeth are for the Arbortech™ Industrail Woodcarver blade #63-IND-FG-100. The package contains 3 of K40 grade tungsten carbide teeth. The teeth are hollow ground and are set i...
These replacement screws are for the Arbortech™ Industrail Woodcarver blade #63-IND-FG-100. The package contains three of M3 Torx™ screws. The screws are high quality grade 12.9 Torx™ 9 head. This acc...
This replacement Torx™ key are for securing Torx™ M3 screws, found on the Arbortech™ Industrail Woodcarver blade #63-IND-FG-100. The package contains one key. This accessory tool can be used with the ...
Fits most 4 inch (100mm) and 4.5 inch (115mm) angle grinders. Suitable for carving, cutting, shaping, trenching and trimming wood. Highly recommended to be used with the Arbortech™ Pro-Guard #63-ACC-F...
Fits most 4 inch (110 mm) and 4.5 inch (115 mm) angle grinders. Featuring the 3 carbide teeth blade (see #63-IND-FG-100) and Pro-Guard kit (see #63-ACC-FG-100). Turn your angle grinder into a fully fu...
This shaft kit can extend the reach of your wood carving activity by a depth of 3 inches (76 mm). Suitable for 4 and 4.5 inch (100 and 115 mm) angle grinders. The carbide blade at the end allows the s...
This hardened steel round file is 5/32 inch (4 mm) diameter), suitable for the mini carver blades used with the Arbortech™ product line of power carving woodworking tools.
For use with your Arbortech™ mini grinder, this package contains four grits (40, 60, 80 and 120) of the 2 inch (50 mm) diameter heavy duty abrasive pads. The pads screw directly onto the mini grinder ...
For use with your Arbortech™ mini grinder, this package contains four discs of 40 grit 2 inch (50 mm) diameter heavy duty abrasive pads. The pads screw directly onto the mini grinder extension arm (sc...
